Acer Aspire 1606 Service Guide
Here you can view all the pages of manual Acer Aspire 1606 Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 101
Chapter 492 CodeBeepsFor Boot Block in Flash ROM E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize the system timer E4h Initialize system I/O E5h Check force recovery boot E6h Checksum BIOS ROM E7h Go to BIOS E8h Set Huge Segment E9h Initialize Multi Processor EAh Initialize OEM special code EBh Initialize PIC and DMA ECh Initialize Memory type EDh Initialize Memory size EEh Shadow Boot Block EFh System memory test F0h Initialize interrupt vectors F1h Initialize...
Page 102
93Aspire 1606 Index of Symptom-to-FRU Error Message LCD-Related Symptoms Symptom / ErrorAction in Sequence LCD backlight doesnt work LCD is too dark LCD brightness cannot be adjusteEnter BIOS Utility to execute “Load Setup Default Settings”, then reboot system. Reconnect the LCD connectors. Keyboard (if contrast and brightness function key doesnt work). LCD inverter ID LCD cable LCD inverter LCD System board Unreadable LCD screen Missing pels in characters Abnormal screen Wrong color...
Page 103
Chapter 494 PCMCIA-Related Symptoms Symptom / ErrorAction in Sequence System cannot detect the PC Card (PCMCIA) PCMCIA slot assembly System board PCMCIA slot pin is damaged. PCMCIA slot assembly Memory-Related Symptoms Symptom / ErrorAction in Sequence Memory count (size) appears different from actual size.Enter BIOS Setup Utility to execute “Load Default Settings, then reboot system. DIMM System board Speaker-Related Symptoms Symptom / ErrorAction in Sequence In Windows, multimedia programs, no sound...
Page 104
95Aspire 1606 NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undetermined Problems” on page 97. System hangs intermittently. Reconnect hard disk/CD-ROM drives. Hard disk connection board System board Peripheral-Related Symptoms Symptom / ErrorAction in Sequence System configuration does not match the installed devices. Enter BIOS Setup Utility to execute “Load Default Settings”, then reboot system. Reconnect hard disk/CD-ROM/diskette drives. External display...
Page 105
Chapter 496 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as: cosmic radiation, electrostatic discharge, or software errors. FRU replacement should be considered only when a recurring problem exists. When analyzing an intermittent problem, do the following: 1.Run the advanced diagnostic test for the system board in loop mode at least 10 times. 2.If no error is detected, do not replace any FRU. 3.If any...
Page 106
97Aspire 1606 Undetermined Problems The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedures to isolate the failing FRU (do not isolate non-defective FRU). NOTE: Verify that all attached devices are supported by the computer. NOTE: Verify that the power supply being used at the time of the failure is operating correctly. (See “Power System Check”...
Page 107
Chapter 498 Index of Phlash16 Error Message Error CodesError Message -1 or // FF Memory allocation for Backup file buffer failed. -2 or // FE BIOS.BAK already exists (rename or delete it) -3 or // FD File Create failed on BIOS.BAK -4 or // FC File Write failed on BIOS.BAK -5 or // FB File Close failed on BIOS.BAK -6 or // FA BIOS backup not supported in BIOS ROM file. -7 or // F9 File Open failed on BIOS ROM file. -8 or // F8 File Read failed on BIOS ROM file. -9 or // F7 File Close failed on BIOS ROM...
Page 108
99Aspire 1606 -44 or // D4 Cannot flash if Memory Managers (e.g.HIMEM) is present. -45 or // D3 BIOS ROM file maybe corrupt (checksum not zero). -46 or // D2 BIOS ROM file size doesn’t match flash part size. -47 or // D1 DMI system and chassis strings require BCP DMI 2.1+. -48 or // D0 BIOS ROM file is older than (or same as) BIOS ROM image. -49 or // CF Platform signature not found in the interface. -50 or // CE Device descriptor signature not found in the interface. -51 or // CD Part table signature...
Page 109
Chapter 4100 Index of PQA Diagnostic Error Code, Message Error CodeMessageAction in Sequence 01XXX CPU or main board error Reload BIOS default setting. System board 02XXX Memory error DIMM System board 03XXX Keyboard error Reset Keyboard Keyboard System board 04XXX Video error System board 05XXX Parallel Port error System board 06XXX Serial port error System board 07XXX Diskette drive error Diskette drive System board 08XXX Hard disk error Reload BIOS default setting Hard disk System board 09XXX CD-ROM...