Accusplit Stopwatch AX602R User Manual

							
ACCUSPLIT, Inc.
6120 Stoneridge Mall Rd., Suite 210 Pleasanton, CA 94588 USA


980-312
ACCUSPLIT®
E X CLUSIVE
AX602R
STOPWATCH
OPERATING
INSTRUCTIONS
ACCUSPLIT®  AX602R  
DIGITAL 100 MEMORY RACER STOPWATCH 
WITH SPLIT AND LAP TIME MEASUREMENT
FEATURESThe Quartz Stopwatch is a digital 
stopwatch featuring memory and 
stroke/frequency measuring func-
tions. In addition, the stopwatch 
is water resistant. Therefore, it is 
suitable for aquatic sports or use 
in rainy weather.
This special “Racer” model 
shows running lap time in 3rd 
display line (instead of cum time), 
and recalls the fastest lap time!

  The stopwatch can measure up  
  to 10 hours in 1/100 seconds.
R
2
 SPLIT TIME/LAP TIME MEASUREMENT
  Up to 100 split times and lap times can be measured.
 LARGE-SIZED THREE-ROW DISPLAY PANEL
  Total elapsed time, split time and lap time are displayed at the same 
  time in separate rows, and they can be measured successively 
  without releasing split or lap time measurement.

  Up to 100 measurements can be stored in memory, and they can be 
  recalled after the measurement is over.

  Year, month, date, hour, minutes, and seconds can be displayed while 
  the stopwatch is not in use.
 BATTERY LIFE INDICATOR
  Lithium battery CR2032 or equivalent is used.

  Exclusive professional case with no-fail buttons.
3 
						

							
There are four buttons as 
indicated in the illustration.
TIME/CALENDARdisplay STOPWATCH
display
4
R
A
C
B
D
5
TIME/CALENDAR SETTING
1. Press “D” to show the time/calendar display. The time/calendar display 
    mark will appear.
2. S1  – Press and hold “B” for 2 seconds until seconds display begins \
 ashing.  TIME/CALENDAR 
display mark
RA
C
B
D
Year
Month and date
Seconds
Minutes
Hour
ACCUSPLIT products use a common setting procedure known as S1-S2-S3-S4.
S1
  (2 sec) - Enter set function OR 
S1   (4 sec) - Enter set function & 
  clear the current settings
S2  – Select  eld to be set 
  (selected  eld will  ash)
S3  – Set  eld to desired settings
S4  – Exit setting function
6
3. S2  – Press “B” repeatedly to select the digits (  ashing) to be adjusted. 
    With each press of “B,” the digits to be adjusted change over \
in the 
 following order. 
4.  S3  – Press “A” to set the   ashing digits or reset the seconds to “00”.
   The digits move quickly if “A” is kept pressed.
   When the seconds digits count any number from ”30” to “59” a\
nd “A” is 
    pressed, one minute is added and the second digits are reset to “00”\
.
5.  S4  – After all the adjustments are completed, press “A” repeatedly\
 until watch 
  exits set mode and returns to  the TIME/CALENDAR d isplay.
Notes:
1. Hour digits are displayed in the 24-hour indication.
2. Year digits can be set from 1988 to 2027. The calendar adjusts automatica\
lly for 
odd and even months including February of leap years.
 seconds  minutes  hour  year  month  date
    Note:  The watch exits set mode automatically after setting date.
7
STOPWATCH
Press “D” in the TIME/CALENDAR display to show the STOPWATCH display. 
The STOPWATCH display mark will appear.
The STOPWATCH can measure up to 20 hours in hours, minutes, seconds and 
1/100 seconds.
   Before using the stopwatch be sure to reset the digits to “0:00:00.00\
”.
    When the stopwatch is stopped, press ”B” to reset.
    When the stopwatch is counting, press “A” to stop the measurement \
    and then press “B”.
RA
C
B
D
STOPWATCH  display mark Split time
Lap time
Running lap time
(
Note:  this is different from 
most stopwatches!)
Split/lap number 
						

							
AAB
   “Split time” refers to an elapsed time required to cover a distanc\
e from 
    the start to a given point.
   “Lap time” refers to an elapsed time required to cover a given sec\
tion 
    of the whole distance.Lap time
Split time
Start
1. STANDARD MEASUREMENT
    Hour  Seconds
            Minutes        1/100 seconds
START STOP RESET
8
2. ACCUMULATED ELAPSED TIME MEASUREMENT
9
START STOPRESTART
RESET STOP
Restart and stop 
of the stopwatch  can be repeated by pressing “A”.
BA
AA
10
3. SPLIT TIME/LAP TIME MEASUREMENT
Note:   When the number of stored measurements 
      exceeds 90,  ashing “FULL” appears, and when 
      it exceeds 100, a warning sound starts beeping.
B
A B
AB
BSTART SPLIT-LAP 1 SPLIT-LAP 2
RESET STOP SPLIT-LAP 8
The split/lap time can 
be measured repeated  by pressing “B”.Split/lap number Split time
Lap time
Accumulated 
elapsed time
Finish time
11
The stopwatch can store up to 100 split times, 100 lap times and total e\
lapsed 
time. They are automatically entered into the memory.
   With each press of “C”, the time stored is recalled. The time can be 
    recalled successively by keeping the button pressed.
   The watch will recall the fastest lap,   nd then show all lap times in 
  sequential order.
4. HOW TO USE THE MEMORY FUNCTION
B
CC
A
C
C
“RECALL” more
Finish time
Reset to “00” 
						

							
12
   To stop the recall of the stored data, press “A”, “B”, or “D”. The
    measurements when the stopwatch was stopped will be shown. 
    Then, press “B” to reset the digits to “00”.
   The time stored in the memory can be recalled even while the stopwatch 
  is measuring.
   To measure the lap time and split time while the stored 
    data are being recalled operate the buttons as follows.
    Press “B” to measure new lap time and split time.
    Press “A” to stop the measurement.
    Press “D” to return to the measurement mode.With each press of “C”
When the stopwatch is stopped Split time and lap time are recalled starting with the  rst ones.
When the stopwatch is measuring The times are recalled starting with  the last ones.BA
13
Notes:
1. Even if the digits are reset to “00”, stored times are not eras\
ed and 
  can be recalled by pressing “C” unless new measurement is started.\
2. If the stopwatch is left untouched with the recalled times shown, the\
 display 
  will automatically return the STOPWATCH display in 1 to 20 minutes.
14
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
See label on back of unit for details, or check 
http://support.ACCUSPLIT.com
REGISTER NOW  Please return 
your AX602R Registration to the 
Repair Center address in the 
warranty, and we will let you 
know about future products. Email (preferred)
User
15