Accusplit Pedometer AH120M9 User Manual

							23
4 5
67
Operating  Instructions 
ACCUSPLIT
AH120M9 PEDOMETER 
DISPLA YS
CURRENT D AY
Displa y
 days1
 7 6 44
MEMOR Y 
display ar ea (flashes when in memor y mode)
MEMORY
Displa y
8922
16 :3 0
The pedometer has two display modes: CURREN T DAY and 
MEMOR Y. 
  1.  CURREN T DAY display: Memory display area in   
   lower right of screen is blank and cloc k is present   
   in lo wer lef t corner.
  2. MEMOR Y display: Memory display area in lower   
   right of screen shows whic h day’s results you are   
   viewing.  To enter MEMOR Y display, press the gray   
   “M” but ton.  
   Return to CURREN T DAY display by repeatedly pressing   
   the gray  “M” button until the memory display area is  
   blank, and cloc k returns.
Mak e sur e you ar e in CURRENT D AY displa y when set ting up 
y our pedomet er and checking t oday’s st eps.
2SETTING UP 
YOUR PEDOMETER
ACCUSPLIT products use a common set ting procedure,  
S1 -S2-S3-S4.
P ress S1 for 2 seconds: Enter the SET mode
P ress S2: Change the eld to be set
P ress S3: Change the eld value
P ress S4 for 2 seconds: Exit the SET mode
SETTING  THE CLOCK
The clock must be set in order for the memory’ s automatic 
rollo ver function to work cor rectly.
  1.  Press and hold the gray S1 but ton for 2 seconds. The  
   HOUR display will star t to blink, showing that you’ ve  
   entered SET mode.
8922
16 :3 0
  2. Press the gray S3 but ton to increase the HOUR display .  
   Hold the but ton down to c hange hours quickly.  
   PM hour s are displayed in military time (1:0 0 PM is  
   13:0 0, 2:0 0 PM is 1 4:00, etc.).
  3. Press the yellow S2 but ton to switch from the HOUR   
   display to the MINUTE display . The MINUTE display  
   will star t to blink.
  4. Press the gray S3 but ton to increase the MINUTE  
   display . Hold the but ton down to c hange minutes   
   quic kly.
  5. Press and hold the yellow S4 but ton for 2 seconds to  
   exit SET mode and return to S TEP mode. The display   
   will stop ashing.
990-003B
ACCUSPLIT
, Inc.
3090 Independence Drive, Suite 148 Livermore, CA 94551 USA
800-935-1996  •  925-290-1900  •  FAX 925-290-1930
 www .ACCUSPLIT .com  •  support@ACCUSPLIT .com
Eat R ig h t!  W alk  M ore !  L iv e W ell! 
e  A CCU SP L IT  L ife st y le
Ho w t o Open y our pedomet er.
S ee diagrams at right.
ACCU SPLIThealtheng ine125379 15:15       785MODE
MEMOR Y
RESET 
						

							
1011
89
1213
1415
Leash is already attached  to the pedometer.
Clasp the waistband of your clothing with  the attached  alligator clip.Or, loop a  badge holder, then  put into pocket(Badge holder  not included)Or, loop a belt  or belt loop
 SAFETY LEASH
This pedometer comes with a free safety leash, to help prevent accidental loss. The leash comes pre-attached to the pedometer.
To use the leash, simply clasp the waistband of your clothing with the attached alligator clip.  You can also use a safety pin to fasten the leash to your clothing, loop the leash through your belt or belt loop, or use a badge holder.
See sketch on next page for details.
 VIEWING YOUR RESULTS
Viewing Today’s Results
Once you put on your pedometer and close the lid, it will  automatically begin to record your steps.
 • STEP mode displays all the step count activity since 
 
    last automatic daily reset (at 3:50 AM)
  • TIME OF DAY appears in lower left hand corner of 
 
    the display.
5:18
8722
Clock
STEP count
VIEWING PREVIOUS D AYS’ RESULTS
Your pedometer has 9 total memories. There are 7 days of step memories, plus today’s step count, plus a TOTAL memory of all steps taken during the past 7 days. 
 WEARING YOUR PEDOMETER
While gently holding the metal belt clip open, slide the pe-dometer onto your belt or the top edge of your pants or skirt. It should fit snugly and level, above one knee.  Note: the pedometer should be as vertical as possible.  Walkers with larger stomachs may find it helpful to wear the  pedometer farther back on the body, toward one hip. 
The cover must be closed for the pedometer to work.
yes
no
 days 7total
87329
MEMORY 
display area (flashes when in memory mode)
 (no clock in memory mode)
To recall the daily memories from the previous 7-day period:
 1. Press the gray “M” button to search for the specific 
 
    day’s records you would like to recall. For example, if  
    you would like to review the records of 2 days ago,  
    press the “M” button until the DAYS display shows  
    “2 days.”
  2. “1 days” is the record for yesterday, “2 days” is for 
 
    2 days ago, etc. “7 days total” shows you the total  
    activity for the past 7 days.
  3. Records older than 7 days are automatically 
 
    discarded. 
						

							
REPLACING THE BATTERY
 1. When the figures on the display start to blink, it is  
    time to replace the battery.
  2. The unit uses one Type CR2032 3-volt lithium battery.
  3. Insert a coin into the slot at the bottom of the body 
 
    case. Twist the coin to remove the front case.
  4. Locate the BATTERY HOLDING PLATE at the bottom 
 
    left corner of the inside case. Remove the plate by  
    loosening the two small screws with a small Phillips  
    head screwdriver.
  5. Take out the old battery and replace it with a new 
 
    battery. Place the battery’s positive (+) terminal  
    FACE UP while you install it into the pedometer.
CLEARING THE MEMORIES
Auto Reset: At 3:50 AM every day, the previous day’s STEP record is automatically saved and STEP display resets to 0. You do not need to press the RESET button every day.
Manual Reset: To reset today’s STEP data to 0, press and hold the yellow RESET button for 2 seconds. Note: Resetting today’s steps before automatic nightly rollover prevents them from being tallied in memory.
System Reset: To reset all memories to 0 (including the clock), press the recessed SYSTEM RESET button in the lower left corner of the front of the display. (Use a pen or the end of a paper clip.) Note: In case of irregular display due to static electricity, pressing the SYSTEM RESET button, and then resetting the CLOCK, will return the unit to normal.
TerminalScrews
NO-PROOF-OF-PURCHASE LIMITED WARRANTYFree service for first year of ownership;  $12 fee for service thereafter. See label inside unit for date.  See www.accusplit.com/support for details
   
and back case together, then pressing the bottom of 
 
    the case together. If the two halves don’t go together  
    easily, check if the front case is upside down!
  7. Reset the CLOCK to restore all functions to your 
 
    pedometer.
CAUTION: Please DO NOT TOUCH inner pedometer par ts, other than battery. Touching the sensor mechanism may af fect the accuracy of the pedometer.
 6. Reinstall the BATTERY HOLDING PLATE 
 
    by tightening the two  
    screws. Put the case  
    back together by  
    matching the  
    top edges of  
    the front case  
1617
1819