Acco Nobo Digital DLP Projector X20P User Manual
Have a look at the manual Acco Nobo Digital DLP Projector X20P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 30 Acco Nobo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 29
29English
Appendices
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
! If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the com-
puter.
2. Press the toggle output settings. Example: [Fn]+[F4]
! If you experience dif! culty changing resolutions or your monitor
freezes, restart all equipment including the...](http://img.usermanuals.tech/thumb/5748/87872/w64_acco-europe-nobo-x20p-manual_d-28.png "Page 29
29English
Appendices
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
! If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the com-
puter.
2. Press the toggle output settings. Example: [Fn]+[F4]
! If you experience dif! culty changing resolutions or your monitor
freezes, restart all equipment including the...")
31English Appendices Problem: Message Reminders ! Fan fail: ! Over temperature: ! Power Off: ! Replace the lamp:
32English Appendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow 30 minutes to cool down before changing lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the Power button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove the screws from the cover.% 5. Push up and remove the cover.& 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module.( To replace the lamp module, reverse the previous steps. 24 13
33English Appendices Remark : “*”com- pressed computer image. Compatibility Modes ModeResolution (ANALOG) V.Frequency(Hz) H.Frequency(kHz) VESA VGA640 x 3507031.5 VESA VGA640 x 3508537.9 VESA VGA640 x 4008537.9 VESA VGA640 x 4806031.5 VESA VGA640 x 4807237.9 VESA VGA640 x 4807537.5 VESA VGA640 x 4808543.3 VESA VGA720 x 4007031.5 VESA VGA720 x 4008537.9 VESA SVGA800 x 6005635.2 VESA SVGA800 x 6006037.9 VESA SVGA800 x 6007248.1 VESA SVGA800 x 6007546.9 VESA SVGA800 x 6008553.7 VESA XGA1024 x 7686048.4 VESA XGA1024 x 7687056.5 VESA XGA1024 x 7687560.0 VESA XGA1024 x 7688568.7 * VESA SXGA1152 x 8647063.8 * VESA SXGA1152 x 8648577.1 * VESA SXGA1280 x 10246063.98 * VESA SXGA1280 x 10247579.98 * VESA SXGA+1400 x 10506063.98 * VESA UXGA1600 x 12006075 MAC LC 13”640 x 48066.6634.98 MAC II 13”640 x 48066.6835 MAC 16”832 x 62474.5549.725 MAC 19”1024 x 7687560.24 * MAC1152 x 87075.0668.68 MAC G4640 x 4806031.35 i MAC DV1024 x 7687560 * i MAC DV1152 x 8707568.49 * i MAC DV1280 x 9607575