Acco Nobo Digital DLP Projector X20P Specifications

11... English
Powering On the Projector
1.Remove the lens cap. n
2.Ensure that the power cord and signal cable are securely
connected.  The Power LED will turn Orange.
3.Turn on the lamp by pressing “Power/Standby” button on
the control panel. o
The startup screen will display for 10 seconds and the
Power LED will turn green.
4.Turn on your source (computer, notebook, video player,
etc.).  The projector will detect your source automatically.
™If you connect multiple sources at the same time, use the...

12English ...
Installation
Warning Indicator
™When the “TEMP” indicator turns red, it indicates the projector has
overheated. The projector will automatically shut itself down.
™When the “LAMP” indicator flashes red (0.5 second intervals), it
indicates a problem with the lamp.  Turn off the projector and
disconnect the power cord from the electrical outlet, then contact
your local dealer or our service center.
™When the “LAMP” indicator flashes red (1 second intervals),
it indicates the fan failed.  Stop...

13... English
Adjusting the Projected Image
Adjusting the Projector Image Height
Tilt Adjusting Wheel
Elevator Foot
2
3
Elevator Button
The projector is equipped with an elevator foot for adjusting
the image height.
To raise the image:
1.Press the elevator button 
n.
2.Raise the image to the desired height angle o, then release
the button to lock the elevator foot into position.
3.Use
p to fine-tune the display angle.
1
To lower the image:
1.Press the elevator button.
2.Lower the image, then release the...

14English ...
63.4"
(160.9cm)105.6"
(268.2cm)147.8"
(375.5cm)169.0"
(429.2cm)211.2"
(536.5cm)
36.9"
(93.8cm)73.8"
(187.5cm)123.0"
(312.5cm)172.2"
(437.5cm)196.9"
(500.0cm)246.1"
(625.0cm)
4.92'
32.81' 26.25' 22.97' 16.40'9.84'(1.5m)
(10.0m) (8.0m) (7.0m) (5.0m) (3.0m)31.7"
(80.5cm)
Max.36. 9"(93.8cm)73. 8"(187. 5cm)123.0"(312.5cm)172.2"(437.5cm)196.9"(500.0cm)246.1"(625.0cm)
Min. 31. 7"(80.5cm) 63....

15... English
Using the Control Panel
Power/Standby
Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Menu
Press “Menu” to launch the on screen display (OSD) menu.
To exit OSD, press “Menu” again.
Keystone / 
Adjusts image distortion caused by tilting the projector (±8
degrees).
Four Directional Select Keys
Use to select items or make adjustments to
your selection.
Enter
Confirm...

16English ...
Using the Remote Control
Power
Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Auto
Automatically synchronizes the projector to the input source.
Keystone
Adjusts image distortion caused by tilting the projector (±8
degrees). Press “Keystone” button, then use 
 to adjust the
setting.
Hide
“Hide” immediately turns the screen black. Press “Hide” again
to restore the...

17... English
The Projector has multilingual On Screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1.To open the OSD menu, press “Menu ” on the remote control
or control panel.
2.When OSD is displayed, use   keys to select any item in the
main menu.  While making a selection on a particular page, press
 or “Enter” key to enter sub menu.
3.Use  keys to select the desired item and adjust the...

18English ...
User Controls
Menu Tree 

19... English
Language
Language
Choose the multilingual OSD menu . Use the or 
Colour Setting
Colour Setting
Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colours for
advanced adjustment of the individual colours.
 key to select
your preferred language.
Press “Enter” to finalise the selection.
User Controls 

20English ...
Image-I
Display Mode
There are many factory presets optimized for various types of
images.
PC: For computer or notebook.
Movie: For home theater.
sRGB: For standard colour.
User: Memorise user’s settings.
Brightness
Adjust the brightness of the image.
Press the  to darken image.
Press the  to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in...