Accels XTA10 Pedal Board Power Supply and Tote Bag Combo User Manual

                                     
 
User’s Manual 
 
 
 
Table of Contents 
Introduction & General Information…………....................................................   1 
Standard included Accessories.…………………....................................................  2 
Pedal Board: Warnings & Cautions…….......…..................................................   2 
Power Supply Mounting: Warnings & Cautions……...……………………………………  2 
Component I.D. & Features Drawing 1 of 4 (XTA...

Standard accessories included with: 
 
1) User’s Manual 
2) Adhesive backed hook and loop tape 
3) Two 1 3/8 Grommets for AC wire Routing 
4) Two Hole Plugs (For XTA25 models only) 
5) Tie wraps 
6) Mounting feet (Installed) 
 
Warnings and Cautions: 
 
Warning: The XTA series of pedal board modules and accessories are designed for the sole use as an 
effects pedal board and not intended to be used in ay other way. Using this product in any way other than 
its intended use may result in injury....

 
Component I.D. & Features Drawing 1 of 4 (XTA Modules I.D.): 
 
 
  
 
 
 
1) AC cable and wire routing hole with grommet. 
2) Left to Right DC current cable routing slots. 
3) Top feed through routing slots for effects pedal to power supply.   
4) Landing area for effects pedals.   
5) Front load power supply mount bay. 
6) Power supply mounting holes for Accel power supplies.  
 
 
 
 
 
 
                                                                           3 
  

 
Component I.D. & Features Drawing 2 of 4 (Module Joining Options): 
 
    
 
7)  Pedal board feet .The feet height can be adjustable by adding washers between the feet and the    
       bottom of the pedal board for uneven floors. (Washers not included). 
  8)  M5 metric threaded holes for Joining Links or Joining Rails 
  9)  Riser screw driver access hole.  
10)  Link Option (Link Assy: 2 Links,4 M5 thread metric screws, 4 flat washers 4 lock washers).  
11)  Rail Option  (Rail Assy: 2 Rails, 8 M5...

 
Component I.D. & Features Drawing 3 of 4 (Adapter & Riser): 
 
 
  
 
 
 8)  M5 metric threaded holes for Joining Links or Joining Rails 
12)  Adapter Plate (Sold Separately)   
13)  Riser (Sold separately) 
14)  M4 metric threaded mounting holes. 
15)  Riser mounting holes 
 
 
                                                                               5  

 
Component I.D. & Features Drawing 4 of 4(power supply mounting): 
 
Power Supply Mounting Instructions: 
 
Accel “Power Source 8" power supply: 
Mounting an Accel power supply to an Accel pedal board is as about hassle free as it gets. Simply 
choose which direction you would like facing out. The AC Input & AC Auxiliary Output side or the 8 DC 
Output side of the power supply and mount with the supplied customer mounting screws.  
 
If you loose your M4 metric thread x 8mm long  mounting screws...

 
Specifications 
 
XTA-10  
Style: Angled Non Tiered 
Material: .080” Aluminum 
Color: Black 
10.50” W X 13.00” DP X 2.50” H 
 
XTA-15 
Style: Angled Tiered 
Material: .080” Aluminum 
Color: Black 
15.00” W X 13.00” DP X 3.50” H 
 
XTA-25 
Style: Angled Tiered 
Material: .080” Aluminum 
Color: Black 
25.00” W X 13.00” DP X 3.50” H 
 
XTA ADAPTER 
Style: Flat  
Material: .080” Aluminum 
Color: Black 
5.00” W X 11.00” DP X 1.50” H 
 
 
 
 
 
 
XTA RISER 
Style: Flat  
Material: .080” Aluminum 
Color:...