Accel RVSS Classic Reverbs User Manual

							 
RV-SS Classic Reverbs 
Effects Pedal 
 
DESCRIPTION 
Accels RV-SS Classic Reverbs effects pedal. 
This stereo-designed reverb pedal has tons of                                                                                                           
character and realism, with super smooth tails.  
With stereo inputs and outputs, this also means  
you can use the Classic Reverbs pedal, either as 
a guitar effects pedal, or as a super compact reverb, 
for recording and mixers. This pedal can easily  
take a mono input (e.g. single guitar) and mono  
output (e.g. to one amplifier). Toggle the top switch 
for three lush reverb sounds: Hall, Spring, Room.  
Also the Mono/Stereo switch which varies the sound 
in either mode giving a total of 6 unique reverb sounds 
covering everything from intimate rooms to large spacious halls. 
As with all Accel pedals, a five year limited warranty is included. 
 
Features: 
Controls: Blend, Time 
Mono input and output. 
Stereo input and output. 
Seal designed dust proof adjust pots  
True Bypass design. 
Metal Casing 
Thumb screw battery access.  
 
Power Source:  
9Volt battery( remove battery cover 
on bottom to replace), 
DC9V adapter or 
Power Supply designed for 
9V effects pedals (not included). 
Such as the  
Accel Power Source 8 power supply. 
 
 
 
 
 
 
Read all warning and cautions before operating your Power 
Accel RV-SS Classic Reverbs Effects Pedal 
1. Keep these instructions – The safety and operating instructions 
should be retained for future reference. 
2. All warnings, cautions and instructions should be adhered too for 
safe operation of this device. 
3. Follow all operating and use instructions for safe operation of this 
unit.   
4. WARNING!!! To reduce the risk of fire or electric shock, do not 
expose this apparatus to rain or moisture. The unit should not be 
exposed to liquids of any kind. Any objects or containers filled 
with liquids, such as drinks or beverages shall not be placed on 
top of the unit. 
5. CAUTION!!! To prevent risk of overheating or damage to the 
Power Source 8 power supply. Mount per Manufacturers 
Mounting Instructions!  
6. Clean only with a dry cloth. 
7. Protect all cords from being walked on or pinched.  
8. Follow all instructions and recommendations regarding 
attachments/accessories specified by the manufacturer. 
9. Unplug the unit during lightning storms or when unused for long 
periods of time. 
10. Refer all servicing to qualified personnel. Service is required 
when the effects pedal has been damaged in any way – such as 
plug or jack damage; if any liquid or foreign objects have gotten 
inside the unit; if it has been exposed to rain or moisture; has 
been dropped; or does not otherwise operate normally. 
 
  
						

							 
CONTROLS 
 
Control Knobs: 
1) Blend: Controls blend of wet and dry signals 
2) Time:  Delay time 
 
Switches: 
3) Top Toggle Switch (3 way): Hall, Spring, Room  
4) Bottom Toggle Switch: Mono / Stereo 
5) Foot Switch: Toggles effect on/off (indicated by red LED). 
 
 
        
 
 
 
 
 
 
DIRECTIONS 
With the amplifier turned off. Route a guitar instrument 
cable from the GUITAR to the INPUT JACK of effects pedal. 
Make sure each end of the cable plug is completely inserted.  
 
With a different cable, route the cable from the  
OUTPUT JACK of the effects pedal to the amplifier. 
 
Plug in preferred power source (9V battery, or a 9V effects 
pedal adapter or 9V effects pedal power supply output).  
Such as our “Power Source 8" power supply, to the effects pedal 
POW ER INPUT JACK.  
 
Note: The effects pedal POWER INPUT JACK is negative  
center polarity, which is the most common in the  
effects pedals market. Be sure that the cable plug is also  
negative center polarity, or damage to the unit may occur.  
 
Before turning on amplifier turn down al volume and level 
controls on your amplifier, pedal and guitar. Turn on amp.  
Adjust  volume and level controls on amplifier, pedal and amp.      
    
SPECIFICATIONS 
Size: 
Input Impedance 1 MS 
Output Impedance 88 dB 
Current Draw 2.2 mA 
Bypass Hardwire 
Power Supply 9 volts DC 
 
 
 
 
 
 
 
 
  
						

							Warranty 
Limited 5 Year Warranty    
This warranty covers any defects or malfunctions in your new Accel RV-SS 
Classic Reverbs effects pedal. This a 5 year warranty for the original 
registered purchaser.  Accel will fix or replace any defective units with the 
first 5 years from the purchase date. Fixing or replacing the unit will be at 
Accels discretion. Any problem that is caused by abuse, misuse, or an act of 
God (such as a flood) are not covered. In order to be eligible for service 
under this warranty you must return the warranty registration card attached 
below within 30 days of purchasing the aid.  
If something goes wrong with your Accel Power Source 8 Power Supply, 
send it postage paid with a brief written description of the problem to:  
Accel Technologies LLC;. 
5505 East Santa Ana Canyon Rd. 
#17057 
Anaheim, CA 92817 
This warranty gives you specific legal rights, and you may also have other 
rights which vary from state to state.  
 
 
 
 
 
 
 
 
 
 
 
LIGHT BOOST MEDIUM CRUNCH SINGING LEAD 
Accel Technologies, LLC. 
P.O. BOX 17057 Anaheim, CA 92817 U.S.A. 
Email: [email protected]