Aaxa Projector P300 User Manual

29
Music Player Menu
Listening to Audio
To use the audio controls, use the directional keys to highlight the opti\
on you wish 
to choose.  
Move selection left
Move selection right
Confirm selection
Play / Pause
RewindFastforward
Previous TrackNext Track
Stop PlaybackRepeat Track
Mute Sound
• To open the music menu, press 
“OK” on projector. 
• To close the music menu, hit 
“back” on projector. 

Music Playback FAQ
How do I loop a song?
1. Choose either USB or SD Card 
for playback
2. Navigate the folders until you 
reach the file you wish to play.
3. Highlight the file you want to 
play, then confirm the selection.
4. Move selection on music player 
menu to “repeat”, and confirm 
the selection.
5. The song will now loop after 
playback is finished.
How do I create a song playlist?
1. Insert your media device (either      
microSD card or USB) into computer.
2. Make a new folder on media device...

EBook Viewer Menu
31
Opening a file:
• Choose “Open File” option
• Select device file is stored on
• Select file from list
Viewing text files
The P300 Pico Projector allows you to view text files.  Select the file you want to view in 
the file menu for the particular storage device on which the file is stored.  You can press 
the left and right arrow buttons on the directional pad or remote to flip through the pages 
you have in the present folder.
*Review Specification section of this manual for...

Setup Menu
32
The Settings Menu can be accessed by selecting “Settings”on the ma\
in menu
Picture• Picture Mode• Color Temperature
• Aspect Ratio 
Sound• Sound Mode• Balance• Auto Volume• Surround Sound
• EQ
Time• Clock• Off Time
• Sleep Timer
Option• OSD Language• Restore Factory Default• Blending
• OSD Duration
Within the settings menu there are 
four more submenus that allow you to 
customize your P300 to the settings 
you want. 

Picture Settings
33
Picture Mode
• Changes the picture mode to 
different settings depending on 
your choosing.
Color Temperature
• Adjusts the color temperature 
from hot to cool (red to blue).
Aspect Ratio
• Changes the aspect ratio of the 
picture - 4:3, 16:9*
Noise Reduction
• Option to reduce the noise 
(grain) of the picture
Backlight
• Adjusts the backlight*Caution: Some pictures may be cut off when aspect ratio is set incorrectly 

Sound Settings
34
Sound Mode
• Change the sound mode depend-
ing on what is currently playing.
Balance
• Adjusts the balance of the sound, 
from left to right.
Auto Volume
• Sets the projector to auto-detect 
for the volume. The projector will 
auto detect the appropriate sound 
mode.
Surround Sound
• Adjusts the surround sound capa-
bilities of the projector.
EQ
• Changes the equalizer for the 
projector, which affects the sound 
signature. 

Time Settings
35
Clock
• Adjust the time/date.
Off Time
• Sets a time for auto turn off of 
projector
On Time
• Sets a time for the projector to 
auto turn on.
Sleep Timer
• Sets a timer until the projector to 
go into sleep mode
Auto Sleep
• Sets the auto sleep of the unit. 

Option Settings
36
OSD Language
• Changes the language of the 
device.
Restore Factory Default
• Restores the projector to factory 
settings.
Blending
• Adjusts the blending option.
OSD Duration
• Allows the projector to set a 
duration for the selected OSD 
language. 

Technical Details
37
Chapter 4
IMAGE IS BLURRED
Possible CausesSolution
The Projector is not in focusAdjust the focus with the focus adjustment dial until the image comes into focus
The Projector is offset from plane / angle of operationMove the projector so that it is both 180 degrees and on an even plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output.  On 
some laptops this is done by pressing and holding Function + F5 key.  
If...

Technical Details
38
THE PROJECTOR DOES NOT TURN ONPossible CausesSolution
There is no powerCheck to ensure the power outlet or battery source is good.  Check the power adapter to ensure a proper connection with the wall outlet as well as the proejctor.  Confirm that the unit is charged and has enough power
The power button was not held long enoughTo power on the projector, the power button needs to be depressed for a full 3 seconds.  Try holding the power button until the optical engine turns on
NO...