Aaxa Projector P2jr Pico User Manual

							Setup Menu
29
The Settings Menu can be accessed by selecting “Settings”on the ma\
in 
Within the Setting Options, there are a few sets 
of submenus including:Picture
•  Picture mode
Adjusts Contrast, Brightness, Color, Sharpness & 
Tint
•  Color Temperature 
Adjusts Color ratio of red, green, and blue
• Aspect Ratio
Choose between 16:9, 4:3, Zoom and more
•  PC setup 
Additional options are available when connected to 
PC via HDMI or VGA
• Backlight
Adjust low or high brightness modes.  Higher 
brightness increases fan noise. 
						

							Setup Menu Cont.
Sound
•  Sound Mode
Adjust Treble and Bass levels
Time
•  Clock
Adjust current time
•  Off timer
Adjust time when P2jr will turn off after
 being idle
•  Sleep timer 
Set timer for P2 to automatically turn 
off
30 
						

							Option
•  OSD Language
Change Language to
English, French, Dutch, Spanish, 
Portuguese or Chinese
•  Restore Factory Default
Reset P2jr back to default settings
•  Blending
Adjust the blending option
•  OSD Duration
Adjust automatic timer to return to 
main screen when idle.
Setup Menu Cont.
31 
						

							Technical Details
32
Chapter 4
IMAGE IS BLURREDPossible CausesSolution
The Projector is not in focus Adjust the focus with the focus adjustment dial 
until the image comes into focus
The Projector is offset from plane / angle of 
operation Move the projector so that it is both 180 degrees 
and on an even plane with the screen.
No Sync, No Signal
Troubleshooting
1. Be sure to setup the computer to enable a video signal output.  On 
some laptops this is done by pressing and holding Function F5 key.  If 
using the P2jr as an external monitor on Windows based systems, this 
can be done by selecting “extend my desktop to this monitor”.
2. Depending on the video driver different resolutions may need to be 
selected for proper output. 
						

							Technical Details
33
THE PROJECTOR DOES NOT TURN ONPossible CausesSolution
There is no power Check to ensure the power outlet or battery 
source is good.  Check the power adapter to 
ensure a proper connection with the wall outlet 
as well as the projector.  Confirm that the unit is 
charged and has enough power
The power button was not held long enough To power on the projector, the power button 
needs to be depressed for a full 3 seconds.  Try 
holding the power button until the optical engine 
turns on
NO PICTURE / FILE NOT SUPPORTEDPossible CausesSolution
The video source is not properly connected or 
selected Check the video source signal to ensure that it 
is properly connected.  Select the current input 
source by choosing the input desired from the 
main menu
Incorrect file extension / Video is encoded with 
incorrect codec Please refer to “Specifications” page to see which 
file types and codec are supported.  Verify that 
the file was encoded properly.
Troubleshooting 
						

							Specifications
34
Brightness 
Maximum Resolution
Contrast Ratio
Projection Lens:
Battery life:
Image Size: 
Lamp: 
Video in:
Audio Output:
MicroSD Card:
 
USB:
Dimensions: 
Weight:
Supported File Formats:55 Lumens 
WXGA(1920x1080)
1000:1
 
Manual Focus
up to 120 minutes
10~60 inches 
15,000 hour RGB Triple LEDs 
Composite A/V
VGA(mini-VGA)
HDMI(mini-HDMI)
1.0 W stereo speaker
 
MicroSD Card Slot
(16 GB maximum)
USB (Memory Sticks)
(16 GB maximum)
4.2 x 2 9 x 0.82 inch
0.3 lbs
A

VI, MPG, MP4, MP3, JPG, TXT 
						

							Please direct all customer service inquiries to:
AAXA Technologies, Inc.
1541 Parkway Loop Suite F Tustin, CA 92780(714) 957-1999
[email protected]