Aaxa Projector M2 User Manual

							PMP System - Main Menu
The M2 projector features a built-in PMP (Portable Media Player) function.  
This function allows the projector to play videos, pictures, music files, and 
text.  To access the Main Menu, simply turn on the projector. The screen 
displayed below will appear. To navigate through the Main Menu, follow these 
directions:
- Scroll left/right by pressing the rewind/fastforward                buttons.
- To select a submenu, highlight the desired submenu and press the Play/
Pause button         located in the middle of the keypad or remote.
- To go back to the previous page while in a submenu, press the (M) 
button on the far left of the keypad or the menu button         on the remote.
Note: If the projector starts in VGA, HDMI or A/V mode, simply press the far 
right button on the control panel to toggle through the input sources until you 
see the picture displayed above. The projector will turn on with the input 
source that was previously selected before shutting down. To read more 
about input sources, please review out Input Selection section in this manual.
11  
						

							PMP System - Videos
The M2 micro projector’s PMP system supports direct playback of a wide 
variety of video formats. To access videos in memory, a SD Card, or an USB 
storage device, first select the “Videos” item in the main menu:
Once in the Videos menu, there are three items that can be selected to 
access the device on which videos files are stored:
12  
						

							PMP System - Videos
13
Playing Videos
- To play/pause a video, press the play button button         in the middle of 
the keypad or remote control.
- To 
rewind, press and hold the left arrow         button          .
- To 
fast-forward, press and hold the right arrow         button          .
- To 
jump forward to the next video, press the right arrow         button. 
- To 
jump back to the prior video, press the left arrow         button          .
- To 
adjust the volume, press Vol+ (        on the remote) to increase and 
Vol- (
 on the remote) to decrease the volume.
Note: If the video is large, please allow the projector a moment to process 
the file. If the after a few minutes the projector does not play a video, it 
means the file is not compatible.
Video Settings Menu
To access the Video Settings Menu, press and hold down the Menu button 
(
M) on the keypad or at the bottom of the remote         . The options are:
Play Mode - Adjusts how the video player loops single or multiple tracks
Zoom - Adjusts how the video is placed within the screen
File Info - Provides detailed information about the current video file
Vision Effect - Adjusts the sharpness of the video image
Subtitle Display - Turns on/off subtitle display during video playback
Subtitle List - Displays a list of available subtitle files
*Review Specifications section of this manual for supported video formats.    
						

							PMP System - Photos
The M2 micro projector’s PMP system supports direct playback of a wide 
variety of image formats. To access photos in memory, a SD Card, or an USB 
storage device, first select the “Photos” item in the main menu:
Once in the Photos menu, there are three items that can be selected to 
access the device on which image files are stored:
14  
						

							PMP System - Photos
15
Viewing Pictures
The M2 Micro Projector allows you to view pictures individually or in a slide-
show. To view individual photos, select the file you want to view in the file 
menu for the particular storage device on which the image file is stored.  You 
can press the arrow buttons           on the touchpad or remote to flip 
through the pictures you have in the present folder.
Viewing Pictures in a Slideshow
To view your pictures in a slideshow, select a file and press Play when the 
picture appears,          will appear in the middle of the screen, which notifies 
you that the slideshow has started.
Photo Settings Menu
To access the Photo Settings Menu, press and hold down the Menu button 
on the keypad (
M) or at the bottom of the remote         . The options available 
are:
Time Slot - Adjusts how quickly the slideshow transitions to the next file
Switch Mode - Changes the transition animation between photos
Sequence - Adjusts the order in which photos are displayed
Image Info - Provides detailed information about the current image file
Zoom - Adjust the size and placement of the image on the screen
Rotate - Changes the vertical and horizontal orientation of the image
*Review Specifications section of this manual for supported image file for -
mats.  
						

							PMP System - Music
16
The M2 micro projector’s PMP system supports direct playback of a wide 
variety of music formats. To access music in memory, a SD Card, or an USB 
storage device, first select the “Music” item in the main menu:
Once in the Music menu, there are three items that can be selected to 
access the device on which music files are stored and two items for playback 
options:  
						

							PMP System - Music
17
Listening to Music
The M2 Micro Projector allows you to playback music as singles or in se-
quence. To begin music playback, select the file you want to play in the file 
menu for the particular storage device on which the music file is stored.
- To 
play/pause a song, press center button        of the touchpad or remote.
- To 
rewind, press and hold the left arrow         button.
- To 
fast-forward, press and hold the right arrow         button.
- To 
jump forward to the next track, press the right arrow         button. 
- To
 jump back to the prior track, press the left arrow         button.
- To 
adjust volume, press Vol+ (        on the remote) to increase and Vol-          
(        on the remote) to decrease the volume.
Music Settings Menu
To access the Music Settings Menu, press and hold down the Menu button 
on the keypad (
M) or at the bottom of the remote        . The options are:
Play Mode - Changes the sequence or repeat mode of playback
Speed - Changes the speed of playback
Live Sound - Adjusts the tone of the music
Show Mode - Adjust the format of text lyrics (if available)
On Text Color - Changes the active text color
Off Text Color - Changes the inactive text color
File Info - Provides detailed information about the current music file
*Review Specifications section of this manual for supported music file 
formats.  
						

							PMP System - Music
18
Library
The music library can be accessed through the Music Menu. This library 
sorts all your music by artist, album, genre, star, year and all items. To 
access your library, follow the directions below:
- Select Music from the main menu
- Select Library from the music menu
- Select which category you want to search your song
- Select the file you want to play
Last Track
The Last Track item in the music menu will play the most recent track that 
was in progress before you shut off your projector. To access this icon, follow 
the same directions for “Library” but click instead on “Last Track” instead for 
the second step.  
						

							PMP System - eBooks
19
The M2 micro projector’s PMP system supports direct playback of written text 
from pages of an ebook or text file. To access eBooks in memory, a SD Card, 
or an USB storage device, first select the “eBooks” item in the main menu:
Once in the eBooks menu, there are three items that can be selected to 
access the device where text files are stored (Note: eBook files must be in 
.txt format).  
						

							PMP System - eBooks
20
Reading eBooks
The controls for ebooks is different from the other onboard programs. Please 
follow the directions below to better understand how to use ebooks with the 
M2.
- To go to the 
next page, press the Vol- button (       on the remote).
- To go to the 
previous page, press the Vol+ button (       on the remote).
- To 
exit the book and go back to the previous menu, press the (M) 
button on the far left of the control panel or          at the bottom of the remote.
Note: When you exit your ebook, the projector will “bookmark” the page you 
left off on. The next time you select the same book to read, the system will 
ask if you want to continue from your last page. Select Yes to start where you 
left off, select No to start from the beginning of the ebook.
eBooks Settings Menu
To access the eBooks Settings Menu, press and hold down the Menu button 
on the keypad (
M) or at the bottom of the remote        . The options are:
Add Bookmark - Creates a bookmark on the current page
Open Bookmark - Access and open bookmarks in the current file
Font - Changes the font size
Color - Select the color of the text on screen
Transition - Turns on/off slide transitions between pages
Rotate - Changes the orientation of the page on screen
Browse Speed - Adjusts the speed of page changes when browsing
Background - Changes the background image behind the page text