Aaton Cam VHR 16 Users Manual
Have a look at the manual Aaton Cam VHR 16 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Aaton manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 VITC Position • “Vitc Position” allows you to choose the position of the Vitc lines. Choice from 10 to 23 in PAL (Aaton recommends line 19), from 13 and 19 in NTSC. • “Parity” allows you to select the parity of the Vitc lines “Odd” and “Even”. Make sure that your Post-production tools run properly with the selected value.
22 Time & Cam Position • The camera inserts the camera speed and magazine footage, as well as Timecode information in the video image. These sub-menus allow you to position the information anywhere on the monitor screen. Use the “Up”, “Down”, “Left” and “Right” keys to move, press “Exit” to return to the Main menu
23 Frame Store • The “Store” menu allows you to store one video image and compare it against the currently incoming images. • Press the “Store” key. Select “View/Store” and press “Right” key. The mes- sage “Shift+store to store” is displayed, proposing to store an image. Pro- ceed. Note : the message position on screen can be modified by using the “Up/ Down/Right/Left” keys. VHR oonn ooffff sshhiifftteexxiitt mmeennuussttoorree ShiftExit Down Up StoreMenu RightLeft
24 Once the image has been memorized, you can compare it to the incoming images. The memorized image is superimposed and can be seen with two different types of “view” : “Blend” or “Checker”. Press “Menu” key to scroll both views. Press “Exit” key to leave the Store mode. Note : the image remains stored only until another one is stored or, the VHR is powered off Stored image. “Blend” mode. “Checker” mode.
25 Other information displayed on the VHR Once the camera has been initialized with Timecode, a “Last shoot” window appears on the camera display at each shoot stop. This window shows the following information : Timecode In, Timecode Out, EL (elapse). The shoot duration is always expressed at 24 fps (bottom EL line). If the camera is running at a higher or lower speed, the top EL line shows the shoot duration at this selected speed. In this case, the bottom EL line automati- cally converts this duration at 24 fps, giving you the standard projection duration . Note : the “Last Shoot” window can be recalled by pressing the “Exit” key. ex : “Last shoot” at 24 fps ex : “Last shoot” at 12 fps ex : “Last shoot”at 48 fps 12 48 2 4
26 Other information displayed on the VHR When the video menu is generated on screen, the camera display shows the above information, meaning the video image and its setting modes are accessible through the connected monitor. Press the “Exit” key to escape.
27 Other information displayed on the VHR While pressing the “Off” key, a help screen is displayed, showing which parameters can be modified in combination with this key. Note : please refer to the Contrast and Backlight menu.
28 Other information displayed on the VHR While pressing the “Shift” key, a help screen is displayed, showing which parameters can be modified in combination with this key. Note : please refer to Direct access control panel menu.