3M Super Close Projection System SCP716 Operators Guide

21 Operator’s Guide 3M
™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Operating Instructions
Projector Start Up
Read the Important Safeguards before operating the SCP716. After all cable connections have been completed, 
refer to Setup and Configuration, the projector can be powered up.
For best results, please observe the following start up sequence.
1.   Power ON all of the connected equipment.
2.   Plug the supplied power cord into the AC inlet of the projector.
3....

22 Operator’s Guide
3M™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Menu Navigation
To display the on screen menus, press the MENU button on the remote control or I/O Module. Use the remote 
control Up/Down ARROW buttons to select the desired menu (see table below), then pull the TRIGGER button 
(bottom of remote control) to display it.
Use the remote control ARROW buttons within a submenu to select the various options displayed on the screen, 
then pull the TRIGGER...

23 Operator’s Guide 3M
™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Input Menu
The Input Menu, shown below, is used to select the desired computer or video input source to be displayed on 
the projector.
InputInput Source: Computer 1
Computer 1 / Component 1 
Computer 2 / Component 2 
RCA Video 
S-Video
Feature Description
Main Input Select the Input source to be displayed on the projector.
1. Computer 1 / Component 2 [Computer 1 = default]
2. Computer 2 / Component 2...

24 Operator’s Guide
3M™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Picture Menu
The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.
PictureInput Source: Computer 1
Picture Mode Enhanced PhotoX
Brightness 50 |···········z············|
0 5 t s a r t n o C |···········z············|
Color 50 |···········z············|
Hue 0 |···········z············|
Sharpness 0 |···········z············|
Video Noise Reduction On
Aspect...

25 Operator’s Guide 3M
™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Advanced Picture Menu
The Picture Menu with the Advanced option selected, shown below, is used to adjust the projected image for 
Computer and Component inputs only.
PictureInput Source: Computer 1
Over Scan 97 |···········z············|
Color / Brightness 10 |·······················z|
Horizontal Position 0 |···········z············|
Vertical Position 0 |···········z············|
Frequency 0...

26 Operator’s Guide
3M™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Audio Menu
-ENUDISPLAYSONLYIF)/-ODULEISCONNECTED	
The Audio Menu, shown below, is used to adjust the audio settings and select the audio input source to play 
through the projector.
AudioInput Source: Computer 1
Volume 10 |···········z············|
Mute OffX
Audio Input¥Stereo Mini 1
Stereo Mini 2
RCA
t e s e RX
Feature Description Range Default
Volume Adjust volume level (0 = muted, 20 = full volume)...

27 Operator’s Guide 3M
™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Setup Menu
The Setup Menu, shown below, is used to configure the basic projector operating parameters.
SetupInput Source: Computer 1
Language EnglishX
Auto Shutoff Minutes Off |···········z···········|
Keystone 0 |···········z···········|
Reset Lamp HrsX
Lamp Mode NormalX
Fan Mode NormalX
Projection Mode   Front ProjectionX
Factory Reset AllX
AdvancedX
t e s e RX
Feature Description Range Default...

28 Operator’s Guide
3M™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Advanced Setup Menu
The Advanced Setup Menu, shown below, is used to initiate the PIN code feature (turn On/Off) and set the 
PIN code.
Setup PINInput Source: Computer 1
PIN Authentication OffX
Network Control OnX Change PIN ·X
Feature Description Range Default
PIN Authentication Turn the PIN code security feature On or Off. N/A Off
Set PIN codeChange the 4-digit PIN access code as desired....

29 Operator’s Guide 3M
™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Information Menu
The Information Menu, shown below, is used to display current projector configuration settings.
InformationInput Source: Computer 1
Input Resolution 1024 x 768
H Frequency 31.75 KHz
V Frequency 60 Hz
Lamp Hours 1235
System Hours 2356
IP Address 192.168.1.10
Net Mask 255.255.255.0
Gateway 192.168.1.1
User Ver. 0.0.8
Feature Description
Input Resolution Displays the current input...

30 Operator’s Guide
3M™ Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Machine Specifications
Item Specification
Acoustic Noise LevelNormal Mode: Typical 32 dB(A)
ECO Mode: Typical 35 dB(A)
Auto Detect & InstallAutomatically recognizes the connection of I/O module
Automatically saves user adjustments
Computer CompatibilityHorizontal Sync: 69 kHz
Vertical Sync: 85 Hz
Conditions for usage environmentRel Humidity:10-80%
Altitude: 0-2286m
Temperature: /10-35C (50-95F)
Dimensions...