3M Personal Projector Mp7720 Operators Manual
Have a look at the manual 3M Personal Projector Mp7720 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
13M™ Multimedia Projector MP7630 © 3M IPC 2000 MP7720 Personal Projector English User’s Guide
iii3M™Personal Projector MP7720 © 3M IPC 2000 Table of Contents INTRODUCTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2 Limited Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Shipping Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3 Optional Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 Projector Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 Projector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 External Control Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Projector Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Remote Control Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 Remote Control Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Installin g or Replacing Batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 Screen Size - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 Connecting to Various Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 OPERATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Start Up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Digital Keystone Correction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Auto Adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Source Selection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Menu System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 1. Display Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 2. Ima ge Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 3. Ima ge Sub-menu with AV Input - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 4. Control Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 5. Source Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ------ - - - - - 20 Shutdown - - - - - - - - - - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -21 MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 Lamp Information - - - - - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -22 Use and Replacement of Lamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 Status LED Indicators - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 Lamp Replacement - - - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -23 Resetting Lamp Hours - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -24 Service information - - - - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -25 Accessories (Included in standard packet) - - - - - - - - - - - - - - - - - - - - - - - 25 Description of Part Number (Not Included in Standard Packet) - - - - - - - - - 25 Orderin gParts or GettingInformation ------------- -------------- 25 TROUBLESHOOTING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26 Common Problems & Solutions - - - - - - - - - - ---- - - - - - - - - - - ---- - - -26 Status Messages - - - - - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -27 SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Projector specifications----- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -28 Timing chart - - - - - - - - - ---- - - - - - - - - - - - ---- - - - - - - - - - - ---- - - -29 DIMENSIONS- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 0
3M™Personal Projector MP77201© 3M IPC 2000 Caution TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. AND PLEASE READ ALL OF THESE INSTRUCTIONS BEFORE YOU OPERATE YOUR PRO- JECTOR. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE . Safety Instructions 1. Read all of these instructions before you operate your projector and save them for future reference. 2. The lamp becomes extremely hot during operation. Keep the projector cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond rated life could cause them to explode in rare occasions. 3. Power is still available when the projector is in the standby mode. Never replace lamp assembly or any electronic components unless the projector is unplugged. 4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. This product is capable of displaying inverted images for ceiling mount configurations. Please use suitable equipment for mounting the unit and make sure it is securely installed. 7. To prevent the lamp from bursting, change the lamp after changing the mounting position of the projector (desktop to ceiling mount or ceiling mount to desktop mount). Caution Always open the lens shutter or remove the lens cap when the projector lamp is on. Do not look straight at the projector lens during operation. The intense light beam may damage your eyesight. In some countries, the line voltage is NOT stable. This projector is designed to operate safely within a bandwidth of 110 to 230 volts, but could fail if power drops or surges of ± 10 volts occur. In these high-risk areas, it is recommended to install a power stabilizer unit. Save These Instructions: The information contained in this manual will help you operate and maintain your 3M™ MP7720 Personal Projector.
Warranty Limited Warranty 3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of two years from date of purchase. Exclusion to Warranty: The lamps are considered a consumable item and are warrantied for 90 days or 180 hours, whichever occurs first. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the war- ranty period, 3M’s only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. Important: The above warranty shall be void if the customer fails to operate the product in accordance with 3M’s written instructions. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio fre- quency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference. FCC STATEMENT - CLASS B: This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the distance between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. 23M™Personal Projector MP7720 © 3M IPC 2000 Table of Contents
Shipping Contents The 3M™ MP7720 Projector is shipped with the necessary cables required for standard PC, Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Ventilation Hole Projection LensBattery Remote Control S-video cable VGA cableRCA cable 220V 240V 11 0 VPower code Audio cable Soft carry case 3M™Personal Projector MP77203© 3M IPC 2000
Optional Accessories 1. Deluxe carry case 2. Spare Lamp Kit Projector Description Projector 1. External Control Panel (see next page) 2. Projection Lens 3. Front Adjustment Feet 4. IR Remote Sensor 5. Ventilation Grill 6. Kensington Lock 7. AC Power Cord Input 8. S-video Connector9. RCA Connector 10. D-Sub Conncetor (for computer/ Input) 11. Audio Input 12. Rear adjustment Feet 13. Lamp Access Door (underneath unit) 43M™Personal Projector MP7720 © 3M IPC 2000 Table of Contents
External Control Panel The External Control Panel is located on the top of the projector, near the rear. The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals from the remote control. For best results, be sure to aim the control toward this sensor, without any obstructions between the two, and at a distance no greater than 6 meters/19 feet. The Menu button will display the menu system onscreen. Press Menuagain to access the sub-menus. The Left and Right buttons help you navigate among choices and settings in the menus and sub-menus. However, when the onscreen menu is not active, the Left and Rightbuttons will function as Keystone +/- hot keys. Press the Exit button to go back to the main menu. Press Exit again to leave the menu system. The Status Indicator will blink or light up when the lamp needs service, cooling or replacement. See “Status Messages” on page 27. for more detailed information. When the projector is turned on, the back-lit Power button will blink during warm-up and lamp ignition, then stay green to indicate the projector is ready for use. Press the Power button for 1 second to turn the projector on or off. Auto key: Automatically fit in the best picture quality for current received signals. Source key: Select signal sources, PC/ RCA/S-video. Left/Keystone MenuExit Right/Keystone Auto sourceLamp Status IndicatorPower 3M™Personal Projector MP77205© 3M IPC 2000
Projector Features The MP7720 Projector integrates high performance optical engine design and user-friendly electrical design, which means more reliable quality and better experience in projecting with the unit. The MP7720 Projector offers the following features: Intelligent Auto-adjustment to display the best picture quality Easy Digital keystone correction as hot keys to make tilted picture normal easily Powerful AV function to show high AV capability Small and portable unit Full-function remote control Easy to set up and use On screen menus in 7 languages: English, French, German, Italian, Spanish, Portuguese, and Traditional Chinese. Color balance control for data/video Ultra-high brightness projection lamp Ability to display 16.7 million colors Note: The brightness of your machine will vary depending on the ambient room conditions and contrast/brightness settings. 6 3M™Personal Projector MP7720 © 3M IPC 2000 Table of Contents
Remote Control Description Remote Control Features The remote control sensors are located in the front/ back of the projector. The distance between the sensor and the remote control unit must be shorter than 6 meters. PowerSource Auto Zoom In Zoom Out Freeze Return Volume MuteBlank KeystoneExit Menu 3M™Personal Projector MP77207© 3M IPC 2000