3M Multimedia Projector X50 Technical Manual
Have a look at the manual 3M Multimedia Projector X50 Technical Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 2
1
TECHNICAL
TECHNICAL
SIGNAL CONNECTOR PIN ASSIGNMENT
rgb in [1]/[2]
rgb out
D-sub 15-pin Shrink Mini Din 4-pin
s-video
Mini Din 4-pin
Pin NoSignal
1
Color:
0.286Vp-p (NTSC, burst signal),
75
Ωterminator
0.3Vp-p (PAL/SECAM, burst signal),
75 Ωterminator
2Brightness:
1.0Vp-p, 75 Ωterminator
3Ground
4Ground
signalTerminalSpecification
RGB signal
inputrgb in¢1z2£
Video: Analog 0.7Vp-p, 75 Ωterminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink...](http://img.usermanuals.tech/thumb/96/87733/w64_3m-x50-technical_d-1.png "Page 2
1
TECHNICAL
TECHNICAL
SIGNAL CONNECTOR PIN ASSIGNMENT
rgb in [1]/[2]
rgb out
D-sub 15-pin Shrink Mini Din 4-pin
s-video
Mini Din 4-pin
Pin NoSignal
1
Color:
0.286Vp-p (NTSC, burst signal),
75
Ωterminator
0.3Vp-p (PAL/SECAM, burst signal),
75 Ωterminator
2Brightness:
1.0Vp-p, 75 Ωterminator
3Ground
4Ground
signalTerminalSpecification
RGB signal
inputrgb in¢1z2£
Video: Analog 0.7Vp-p, 75 Ωterminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink...")
![Page 4
3
The following signals are used for the initial settings.
The signal timing of some computer models may be different. In such case\
, refer to
adjust the V.POSIT and H.POSIT of the menu.
DATAHSYNCDATA VSYNCDisplay interval c
Back porch b
Sync a Front porch d
Display interval c
Back porch b
Sync a Front porch d
Computer /
SignalHorizontal signal timing (µs)
abcd
TEXT2.03.020.31.0
VGA (60Hz)3.81.925.40.6
Mac 13mode2.13.221.22.1
VGA (72Hz)1.33.820.31.0
VGA (75Hz)2.03.820.30.5
VGA (85Hz)1.62.217.81.6
SVGA...](http://img.usermanuals.tech/thumb/96/87733/w64_3m-x50-technical_d-3.png "Page 4
3
The following signals are used for the initial settings.
The signal timing of some computer models may be different. In such case\
, refer to
adjust the V.POSIT and H.POSIT of the menu.
DATAHSYNCDATA VSYNCDisplay interval c
Back porch b
Sync a Front porch d
Display interval c
Back porch b
Sync a Front porch d
Computer /
SignalHorizontal signal timing (µs)
abcd
TEXT2.03.020.31.0
VGA (60Hz)3.81.925.40.6
Mac 13mode2.13.221.22.1
VGA (72Hz)1.33.820.31.0
VGA (75Hz)2.03.820.30.5
VGA (85Hz)1.62.217.81.6
SVGA...")
![Page 6
5
(1) Turn off the projector and computer power supplies and connect with the \
RS-232C cable.
(2) Turn on the computer power supply and after the computer has started up,\
turn on theprojector power supply.
Control jack
D-sub 15-pin shrink jack123456789101112131415
RD
TD
GND
SELO
RTS
123456789
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI
1 2345
67 89
RS-232C jack
D-sub 9-pin
Projector Computer
Communications setting
19200bps, 8N1
1 Protocol
Consist of header (7 bytes) + command data (6 bytes).
2 Header
BE + EF +...](http://img.usermanuals.tech/thumb/96/87733/w64_3m-x50-technical_d-5.png "Page 6
5
(1) Turn off the projector and computer power supplies and connect with the \
RS-232C cable.
(2) Turn on the computer power supply and after the computer has started up,\
turn on theprojector power supply.
Control jack
D-sub 15-pin shrink jack123456789101112131415
RD
TD
GND
SELO
RTS
123456789
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI
1 2345
67 89
RS-232C jack
D-sub 9-pin
Projector Computer
Communications setting
19200bps, 8N1
1 Protocol
Consist of header (7 bytes) + command data (6 bytes).
2 Header
BE + EF +...")
![Page 7
6Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ t\
ype (2 bytes)
+‘00H’+‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 byte\
s) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ t\
ype (2 bytes) + setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting...](http://img.usermanuals.tech/thumb/96/87733/w64_3m-x50-technical_d-6.png "Page 7
6Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ t\
ype (2 bytes)
+‘00H’+‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 byte\
s) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ t\
ype (2 bytes) + setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting...")
![Page 12
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-90003M Canada
P.O. Box 5757
London, Ontario
N6A 4T13M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico 3M Europe
Boulevard de lOise
95006 Cerge Pontoise Cedex
France
Litho in Japan
© 3M 2003
78-6970-9348-8 Rev. A
Let us help you make the most of your next presentation. We offer every\
thing from presentation supplies to tips for better mee tings. And were the only
transparency manufacturer that offers a...](http://img.usermanuals.tech/thumb/96/87733/w64_3m-x50-technical_d-11.png "Page 12
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-90003M Canada
P.O. Box 5757
London, Ontario
N6A 4T13M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico 3M Europe
Boulevard de lOise
95006 Cerge Pontoise Cedex
France
Litho in Japan
© 3M 2003
78-6970-9348-8 Rev. A
Let us help you make the most of your next presentation. We offer every\
thing from presentation supplies to tips for better mee tings. And were the only
transparency manufacturer that offers a...")
10 Command data chart (continued) NamesOperation typeHeaderCommand data CRCActionTypeSetting code Tint GetBE EF0306 0049 7302 0003 2200 00 IncrementBE EF0306 002F 7304 0003 2200 00 DecrementBE EF0306 00FE 7205 0003 2200 00 Video FormatSet AutoBE EF0306 009E 7501 0000 220A 00 NTSCBE EF0306 00FE 7101 0000 2204 00 PALBE EF0306 006E 7001 0000 2205 00 SECAMBE EF0306 006E 7501 0000 2209 00 NTSC 4.43BE EF0306 005E 7201 0000 2202 00 M-PALBE EF0306 00FE 7401 0000 2208 00 N-PALBE EF0306 000E 7101 0000 2207 00 GetBE EF0306 000D 7302 0000 2200 00 HDTVSet1080iBE EF0306 00F2 7301 0005 2200 00 1035iBE EF0306 0062 7201 0005 2201 00 GetBE EF0306 00C1 7302 0005 2200 00 Sync on GSetoffBE EF0306 00CB D001 0008 3001 00 onBE EF0306 005B D101 0008 3000 00 GetBE EF0306 0068 D102 0008 3000 00 WHISPERSetNORMALBE EF0306 003B 2301 0000 3300 00 WHISPERBE EF0306 00AB 2201 0000 3301 00 GetBE EF0306 0008 2302 0000 3300 00 GAMMASet NORMALBE EF0306 00C7 F001 00A1 3000 00 CINEMABE EF0306 0057 F101 00A1 3001 00 DYNAMICBE EF0306 00A7 F101 00A1 3002 00 GetBE EF0306 00F4 F002 00A1 3000 00 Over ScanSet LargeBE EF0306 00C2 7101 0009 2202 00 MiddleBE EF0306 0032 7101 0009 2201 00 SmallBE EF0306 00A2 7001 0009 2200 00 GetBE EF0306 0091 7002 0009 2200 00 MyScreen SizeSetFullBE EF0306 0043 D601 0012 3000 00 X1BE EF0306 00D3 D701 0012 3001 00 GetBE EF0306 0070 D602 0012 3003 00 MyScreen LockSetoffBE EF0306 003B EF01 00C0 3000 00 onBE EF0306 00AB EE01 00C0 3001 00 GetBE EF0306 0008 EF02 00C0 3000 00 Lamp TimeGetBE EF0306 00C2 FF02 0090 1000 00 Filter TimeGetBE EF0306 00C2 F002 00A0 1000 00 $1485&$)/*$M y
3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-90003M Canada P.O. Box 5757 London, Ontario N6A 4T13M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07000 Mexico 3M Europe Boulevard de lOise 95006 Cerge Pontoise Cedex France Litho in Japan © 3M 2003 78-6970-9348-8 Rev. A Let us help you make the most of your next presentation. We offer every\ thing from presentation supplies to tips for better mee tings. And were the only transparency manufacturer that offers a recycling program for your used \ transparencies. For late-breaking news, handy referenc e and free product samples, call us toll-free in the continental United States and Canada, 24 hours a day\ , or visit our Internet Website. DN00571 (S50/X50_OG_TECH) Intended Use Before operating this machine, please read this entire manual thoroughly\ . The 3M TM Multimedia Projectors are designed, built, and tested for use indoors, \ using 3M lamps, 3M ceiling mount hardware, and nominal local voltages. The use of other replacement lamps, outdoor operation, or different volt\ ages has not been tested and could damage the projector peripheral equipment and/or create a potentially unsafe operating condition. 3M Multimedia projectors and Wall Display Systems are designed to operat\ e in a normal office environment. 16 to 29C (60 to 85 F) 10- 80 %RH (without condensation) 0- 1828 m (0-6000 feet) above sea level The ambient operating environment should be free of airborne smoke, grea\ se, oil and other contaminates that can affect the oper ation or performance of the projector. Use of this product in adverse conditions will void the product warranty\ .