3M Multimedia Projector X40 Operators Manual
Here you can view all the pages of manual 3M Multimedia Projector X40 Operators Manual. The 3M manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
30
• The lamp indicator is also red when the lamp unit reaches high temperature.
Before replacing the lamp, switch power OFF, wait approximately 20 minut\
es, and switch power ON again. If the lamp indicator is still red, replace the lamp.NOTE
Replacing the lamp
All projector lamps will wear out eventually. If used for long periods o\
f time, the image could become
darkened, and the color contrast could be impacted as well. We recommend\
that you replace your lamps
early. If the lamp indicator turns...](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-30.png "Page 31
30
• The lamp indicator is also red when the lamp unit reaches high temperature.
Before replacing the lamp, switch power OFF, wait approximately 20 minut\
es, and switch power ON again. If the lamp indicator is still red, replace the lamp.NOTE
Replacing the lamp
All projector lamps will wear out eventually. If used for long periods o\
f time, the image could become
darkened, and the color contrast could be impacted as well. We recommend\
that you replace your lamps
early. If the lamp indicator turns...")
30 • The lamp indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minut\ es, and switch power ON again. If the lamp indicator is still red, replace the lamp.NOTE Replacing the lamp All projector lamps will wear out eventually. If used for long periods o\ f time, the image could become darkened, and the color contrast could be impacted as well. We recommend\ that you replace your lamps early. If the lamp indicator turns...
Page 32
![Page 32
THE AIR FILTER
Caring for the air filter
The air filter should be cleaned about every 100 hours. If the lamp indicator and
temp indicator blink red simultaneously, or a message prompts you to clean t\
he air
filter when you turn on the unit, the filter needs to be cleaned. (See \
Related
Messages ( ) and Regarding the Indicator Lamps ( ) fo\
r details.)
$1497PM&7 4 .](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-31.png "Page 32
THE AIR FILTER
Caring for the air filter
The air filter should be cleaned about every 100 hours. If the lamp indicator and
temp indicator blink red simultaneously, or a message prompts you to clean t\
he air
filter when you turn on the unit, the filter needs to be cleaned. (See \
Related
Messages ( ) and Regarding the Indicator Lamps ( ) fo\
r details.)
$1497PM&7 4 .")
THE AIR FILTER Caring for the air filter The air filter should be cleaned about every 100 hours. If the lamp indicator and temp indicator blink red simultaneously, or a message prompts you to clean t\ he air filter when you turn on the unit, the filter needs to be cleaned. (See \ Related Messages ( ) and Regarding the Indicator Lamps ( ) fo\ r details.) $1497PM&7 4 .
Page 33
32 Replacing the air filter $1497PM&7 4 .
Page 34
![Page 34
OTHER CARE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleane\
d and inspected by
your local dealer about once every 2 years. Never try to care for the in\
side of the unit
yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. \
Do not touch the
lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth....](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-33.png "Page 34
OTHER CARE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleane\
d and inspected by
your local dealer about once every 2 years. Never try to care for the in\
side of the unit
yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. \
Do not touch the
lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth....")
OTHER CARE Caring for the inside of the projector : In order to ensure the safe use of your projector, please have it cleane\ d and inspected by your local dealer about once every 2 years. Never try to care for the in\ side of the unit yourself. Doing so is dangerous. Caring for the lens : Lightly wipe the lens with a commercially available lens-cleaning wipe. \ Do not touch the lens directly with your hand. Caring for the cabinet and remote control transmitter : Wipe lightly with gauze or a soft cloth....
Page 35
![Page 35
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED
Related Messages
When the units power is ON, messages such as those shown below may be d\
isplayed. When
any such message is displayed on the screen, please respond as described\
below.
34
Note 1: Although this message will be automatically disappeared after around 3 m\
inutes, it will bereappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact th\
at, after long hours of usage, a...](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-34.png "Page 35
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED
Related Messages
When the units power is ON, messages such as those shown below may be d\
isplayed. When
any such message is displayed on the screen, please respond as described\
below.
34
Note 1: Although this message will be automatically disappeared after around 3 m\
inutes, it will bereappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact th\
at, after long hours of usage, a...")
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED Related Messages When the units power is ON, messages such as those shown below may be d\ isplayed. When any such message is displayed on the screen, please respond as described\ below. 34 Note 1: Although this message will be automatically disappeared after around 3 m\ inutes, it will bereappeared every time the power is turned ON. Note 2: Lamps have a finite product life. Lamps are characterized by the fact th\ at, after long hours of usage, a...
Page 36
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued) Regarding the Indicator Lamps Lighting and flashing of the power indicator, the lamp indicator, and the temp indicator have the meanings as described in the Table below. Please respond in accordance with the instructions within the Table. power indicatorlamp indicatortemp indicatorDescription The orange lamp is lightedTurned OFF (Not lighted)Turned OFF(Not lighted)The STANDBY mode is set Flashing of the green lampTurned OFFTurned OFFThe...
Page 37
![Page 37
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Although bright spots or dark spots may appear on the screen, this is a \
unique characteristic of
liquid crystal displays, and such do not constitute or imply a machine d\
efect.
NOTE
PhenomenonCases not involving a machine defectItems to be confirmedReferencePage(s)
Power does notcome ON
The main power source...](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-36.png "Page 37
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Although bright spots or dark spots may appear on the screen, this is a \
unique characteristic of
liquid crystal displays, and such do not constitute or imply a machine d\
efect.
NOTE
PhenomenonCases not involving a machine defectItems to be confirmedReferencePage(s)
Power does notcome ON
The main power source...")
Phenomena That May Easily Be Mistaken for Machine Defects Before requesting repair, check in accordance with the following chart. If the situation cannot be corrected, then contact your dealer. Although bright spots or dark spots may appear on the screen, this is a \ unique characteristic of liquid crystal displays, and such do not constitute or imply a machine d\ efect. NOTE PhenomenonCases not involving a machine defectItems to be confirmedReferencePage(s) Power does notcome ON The main power source...
Page 38
Dimension Diagram ItemSpecification Product nameLiquid crystal projector Liquid crystal panelPanel size1.8 cm (0.7 type) Drive systemTFT active matrix PixelsS40480,000 pixels (800 horizontal x600 vertical) X40786,432 pixels (1024 horizontal x 768 vertical) LensZoom lens F=1.7 ~ 1.9 f=21.7 ~ 26.1 mm Lamp150 W UHB Speaker1.0W Power supplyAC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A Power consumption240W Temperature range0 ~ 35°C (Operating) Size316 (W) x 93 (H) x 254 (D) mm (Not including protruding...
Page 39
![Page 39
38
Acccessories............................................................\
......................Part Number
UHB lamp, 150W (S40) ..................................................................78-6969-9463-7
UHB lamp, 150W (X40) ..................................................................78-6969-9565-9
Air Filter ........................................................................\
..................78-8118-9182-5
Power cord (US)...](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-38.png "Page 39
38
Acccessories............................................................\
......................Part Number
UHB lamp, 150W (S40) ..................................................................78-6969-9463-7
UHB lamp, 150W (X40) ..................................................................78-6969-9565-9
Air Filter ........................................................................\
..................78-8118-9182-5
Power cord (US)...")
38 Acccessories............................................................\ ......................Part Number UHB lamp, 150W (S40) ..................................................................78-6969-9463-7 UHB lamp, 150W (X40) ..................................................................78-6969-9565-9 Air Filter ........................................................................\ ..................78-8118-9182-5 Power cord (US)...
Page 40
![Page 40
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-90003M Canada
P.O. Box 5757
London, Ontario
N6A 4T13M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico 3M Europe
Boulevard de lOise
95006 Cerge Pontoise Cedex
France
Litho in Japan
© 3M 2003
78-6970-9198-7 Rev. A
Let us help you make the most of your next presentation. We offer every\
thing from presentation supplies to tips for better mee tings. And were the only
transparency manufacturer that offers a...](http://img.usermanuals.tech/thumb/96/87722/w300_3m-x40-manual_d-39.png "Page 40
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-90003M Canada
P.O. Box 5757
London, Ontario
N6A 4T13M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico 3M Europe
Boulevard de lOise
95006 Cerge Pontoise Cedex
France
Litho in Japan
© 3M 2003
78-6970-9198-7 Rev. A
Let us help you make the most of your next presentation. We offer every\
thing from presentation supplies to tips for better mee tings. And were the only
transparency manufacturer that offers a...")
3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-90003M Canada P.O. Box 5757 London, Ontario N6A 4T13M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07000 Mexico 3M Europe Boulevard de lOise 95006 Cerge Pontoise Cedex France Litho in Japan © 3M 2003 78-6970-9198-7 Rev. A Let us help you make the most of your next presentation. We offer every\ thing from presentation supplies to tips for better mee tings. And were the only transparency manufacturer that offers a...