3M Multimedia Projector S40/X40 Operators Guide
Here you can view all the pages of manual 3M Multimedia Projector S40/X40 Operators Guide. The 3M manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
10Laptop computer Desktop computer CONNECTING YOUR DEVICES (continued) Connecting to a Computer ATTENTIONWhenever attempting to connect a laptop computer to the projector, be sure to activate the laptops RGB external image output (set the lap\ top to CRT display or to simultaneous LCD and CRT display). For details on how thi\ s is done, please refer to the instruction manual of the corresponding laptop compu\ ter. • Some computers may have multiple display screen modes. Use of some \ of these modes will...
Page 12
11 DVD playerVCR Connecting to a DVD Player Connecting to a VCR #$ *GVTJOHBDPNQPOFOU WJEFPDPOOFDUJPO *GVTJOHBOBVEJPWJEFP DPOOFDUJPO COMPONENT VIDEO IN COMPONENT VIDEO OUTAUDIO/VIDEO INAUDIO/VIDEO OUT S-VIDEO IN S-VIDEO OUT If using a S-video connection COMPONENT cable AUDIO/VIDEO cable S-VIDEO cable # If using a S-video connection 6%*07*%&0*/ 6%*07*%&0065 47*%&0*/ 47*%&0065 AUDIO/VIDEO cable S-VIDEO cable $1497PM&7 4 .
Page 13
1Remove the battery cover Slide back and remove the battery cover in the direction of the arrow. Insert the batteries Align and insert the two AA batteries (that came with the projector) according to their plus and minus terminals (as indicated in the remote control). Close the battery cover Replace the battery cover in the direction of the arrow and snap it back into place. 2 3 USING THE REMOTE CONTROL CAUTIONPrecautions to observe in regards to the batteries Always handle the batteries with care and...
Page 14
13 • The remote control works with both the projectors front and rear remote sensors. • The range of the remote sensor on the front is 3 meters with a 90-degree range (45 degrees to the left and right of the remote sensor), and back is 3 meters with a 60-degree range. • Since the remote control uses infrared light to send signals to the projector (Class 1 LED), be sure to use the remote control in an area free from obstacles that could block the remote controls output signal to the projector....
Page 15
14 1Make sure that the power cord is firmly and correctly connected to the projector and outlet 2 3Press the STANDBY/ON button of remote control or the on/off button of control panel • The projector begins warming up and the power indicator blinks green. • The power indicator stops blinking and lights to solid green once the projectors power is completely on. VIDEO ASPECT MUTE KEYSTONE FREEZE OFFON VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON TURNING ON THE POWER Control panel Precautions...