3M Multimedia Projector S15 Operators Guide

							
51

Phenomena that may easily be mistaken for machine defects (continued)

Phenomenon
Cases not involving a machine defect
Reference

page 



No pictures are 

displayed.

The lens 
cover
 is closed.
cover is closed.cover

Remove the lens
cover
.
4
, 
1
6

The signal cables are not correctly connected.

Correctly connect the connection cables.
13, 14

The brightness is adjusted to an extremely low level.

Adjust the BRIGHT to a higher level using the menu function

or the remote control
.

25, 27

The 
computer
 cannot detect the projector as a plug 
computer cannot detect the projector as a plug computer

and play monitor.

Make sure that the 
computer’s
 can detect a plug and play 

monitor using other plug and play monitor.

1
3

Colors have a

faded- out

appearance, or

Color tone is 

poor.

Color settings are not correctly adjusted.

Perform picture adjustments by changing the COLOR 

TEMP, 
COLOR
, 
TINT and/or 
COLOR SPAC
E
settin
gs, 

using the menu functions.

2
5
, 
28 

32

COLOR SPACE setting is not suitable.

Change the COLOR SPACE setting to AUTO, RGB, 

SMPTE240 , REC709 or REC601. 

3
2

Pictures appear 

dark.

The brightness and/or contrast are adjusted to an 

extremely low level.

Adjust the BRIGHT and/or CONTRAST settings to a higher 

level using the menu function.

2
5
, 
2
7

The WHISPER function is working.

Select the NORMAL to the item WHISPER in the SETUP 

menu.

2
6
, 
3
4

The lamp is approaching the end of its product 

lifetime.

Replace the lamp.

41, 42, 

44

Pictures appear

blurry.

Either the focus and/or horizontal phase settings are 

not properly.

Adjust the focus using the focus 
ring
, and/or H PHASE 

using the menu function.

1
9
, 
30

The lens is dirty or misty.

Clean the lens by referring to the section “
Carin
g
f
or 
for f
t
he 

l
en
s
”.

4
5

Troubleshooting
NOTE  • Although bright spots or dark spots may appear on the screen, this 
is a unique characteristic of liquid crystal displays, and such do not constitute or 
imply a machine defect. 
						

							
52

Specifi cations
NOTE  • This specifi cations are subject to change without notice.
Warranty and after-ser vice / Specifi cations
ItemSpecifi cation
Product nameLiquid crystal projector
Liquid
Crystal
panel
Panel size1.4 cm (0.55 type)
Drive systemTFT active matrix
Pixels480,000 pixels (800 horizontal x 600 vertical)
LensF=1.65  f=20.4 mm
Lamp165W UHB
Power SupplyAC100-120V/2.7A, AC220-240V/1.5A
Power Consumption240W
Temperature range5 ~ 35°C (Operating)
Size
285 (W) x 73 (H) x 202 (D) mm 
(Not including protruding parts)
• Please refer to the following fi gure.
Weight (mass)2.2 kg
Ports
RGB input:  RGB .....D-sub 15pin mini x 1
Communication port:  CONTROL ........  CONTROL ........  CONTROLD-sub 9pin x 1
Video input:  VIDEO .....................RCA x 1  S-VIDEO  ...........S-Video x 1
Audio input:  AUDIO ..........Stereo mini x 1 
						

							
53

Specifi cations
Specifi cations (continued)
[unit: mm][unit: mm]
202
28569
33.57383 
						

							
54

Accessories
Accessories
Accessories ...............................................................Part Number
UHB lamp, 165W ..................................................................78-6969-9812-5
Air Filter ................................................................................Air Filter ................................................................................Air Filter78-8118-9584-2
Power cord (US) ...................................................................78-8118-8102-4
Power cord (UK) ...................................................................78-8118-8101-6
Power cord (Europe) ............................................................78-8118-8103-2
VGA cable ............................................................................78-8118-8708-8
Remote control .....................................................................78-8118-9585-9
Filter cover (for ceiling installation) .......................................78-8118-9586-7
Not included with Basic Packet ................................Part Number
RCA Video cable ..................................................................78-8118-8482-0
S-Video cable .......................................................................78-8118-3238-1
Ultra value warranty S15 (US only) ......................................78-6969-9796-0
How to Order
Please order these parts through your dealer, or contact 3M Customer Service at 
the following number :
In U.S. or Canada : 1-800-328-1371
In other locations, contact your local 3M sales offi ce. 
						

							
Intended Use
Before operating this machine, please read this entire manual thor ough ly. The 3M
TM
 Multimedia Projectors are designed, built, and tested for use 
indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.
The use of other replacement lamps, outdoor operation, or different volt ag es has not been tested and could damage the projector pe riph er al equip-
 ment and/or create a potentially unsafe operating con di tion.
3M Multimedia projectors and Wall Display Systems are designed to op er ate in a normal offi ce environment.
  •  16° to 29°C (60° to 85° F)
  •  10- 80 %RH (without condensation)
  •   0- 1828 m (0-6000 feet) above sea level
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can af fect the operation or perfor-
mance of the projector.
Use of this product in adverse conditions will void the product warranty.

Let us help you make the most of your next presentation.  We offer everything from presentation supplies to tips for better meetings.  And we’re 
the only transparency manufacturer that offers a recycling program for your used transparencies.  For late-breaking news, handy reference  and free 
product samples, call us toll-free in the continental United States and Canada, 24 hours a day , or visit our Internet Website.

3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-9000

3M Canada
P.O. Box 5757
London, Ontario
N6A 4T1

3M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F.  07000
Mexico

3M Europe
Boulevard de l’Oise
95006 Cerge Pontoise Cedex
France
Litho in China
© 3M 2005
78-6970-9405-6 Rev. A
(DN00821-S15_OG_ENG) 
						

							4. Click Email Filters .
5. Highlight an email message filter.
6. Press the  Menu key.
7. Click  Edit.
8. Change the options for the email message filter.
9. Press the  Menu key.
10. Click  Save.
Prioritize email message filters
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Filters .
5. Highlight an email message filter.
6. Press the  Menu key.
7. Click  Move.
8. Click the new location.
Delete an email message filter
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Filters .
5. Highlight an email message filter.
6. Press the  Menu key.
7. Click  Delete.
Email message folders About synchronization of email message folders
You can add, change, or delete email message folders in the email application on your computer or in the messages application on your
BlackBerry®  device. If wireless email reconciliation is turned on and your email account is associated with a BlackBerry® Enterprise Server that
supports this feature, changes that you make to email message folders are synchronized over the wireless network.
If wireless email reconciliation is turned off or is not available for your device, you can make folder changes in the email application on your
computer and then reconcile the changes to your device using the email settings tool of the BlackBerry® Desktop Manager. For more information
about email reconciliation, see the BlackBerry® Desktop Software Online Help.
Related topics
Add an email message folder, 55User GuideMessages54 
						

							Add an email message folder
To perform this task, your BlackBerry® device must be associated with an email account that uses a BlackBerry® Enterprise Server that supports
this feature. For more information, contact your administrator.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  View Folder .
4. Highlight a folder.
5. Press the  Menu key.
6. Click  Add.
Rename an email message folder
To perform this task, your BlackBerry® device must be associated with an email account that uses a BlackBerry® Enterprise Server that supports
this feature. For more information, contact your administrator.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  View Folder .
4. Highlight a folder.
5. Press the  Menu key.
6. Click  Rename.
Move an email message folder
To perform this task, your BlackBerry® device must be associated with an email account that uses a BlackBerry® Enterprise Server that supports
this feature. For more information, contact your administrator.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  View Folder .
4. Highlight a folder.
5. Press the  Menu key.
6. Click  Move.
7. Click the new location.
Delete an email message folder
To perform this task, your BlackBerry® device must be associated with an email account that uses a BlackBerry® Enterprise Server that supports
this feature. For more information, contact your administrator.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  View Folder .
User GuideMessages55 
						

							4. Highlight a folder.
5. Press the  Menu key.
6. Click  Delete.
Email message flags About flags
You can add flags to email messages that you receive or send as a reminder to you or the recipients to follow up with the messages. You can
use flags of different colors, add follow-up notes, and set due dates so that your  BlackBerry® device reminds you to return to the email messages.
If wireless email reconciliation is turned on and your email account uses a BlackBerry® Enterprise Server that supports flags, changes that you
make to flags on your device should be reflected in the email application on your computer. Likewise, changes that you make to flags in the
email application on your computer should be reflected on your device.
If wireless email reconciliation is turned off, or is not available for your device, you can still manage flags for email messages on your device.
Add a flag
1. When composing or viewing an email message, press the  Menu key.
2. Click  Flag for Follow Up .
3. Press the  Menu key.
4. Click  Save.
Change a flag
You can change the status, color, note, or due date for a flag. If you make changes to a flag in an email message that you sent, the changes
are reflected only on your device and are not sent to the recipient.
1. In an email message with a flag, press the  Menu key.
2. Click  Flag Properties .
3. Change the flag properties.
4. Press the  Menu key.
5. Click  Save.
Remove a flag
1. In an email message with a flag, press the  Menu key.
2. Click  Delete Flag .
Email message options Check spelling automatically before sending email messages
1. On the Home screen or in a folder, click the  Options icon.
2. Click  Spell Check .User GuideMessages56 
						

							3. Select the Spell Check Email Before Sending  option.
4. Press the  Menu key.
5. Click  Save.
Set an out-of-office reply
To perform this task, your BlackBerry® device must be associated with an email account that uses a BlackBerry® Enterprise Server that supports
this feature. For more information, contact your administrator.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Settings .
5. If necessary, change the  Message Services field.
6. Change the  Use Out Of Office Reply  field to Yes.
7. In the text box that appears, type a reply.
8. If you use IBM® Lotus Notes®, in the  Until field, set the date on which the out-of-office reply should turn off.
9. Press the  Menu key.
10. Click  Save.
To turn off the out-of-office reply, change the  Use Out Of Office Reply field to No.
Request delivery or read confirmation for email messages
Depending on your wireless service provider, this feature might not be supported.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Settings .
5. If necessary, change the  Message Services field to the email account that uses the BlackBerry Internet Service.
6. Perform any of the following actions: • To send read notification when a sender requests it, change the  Send Read Receipts field.
• To request delivery or read notification when you send email messages, change the  Confirm Delivery and Confirm Read  fields.
7. Press the  Menu key.
8. Click  Save.
View email messages in plain text format
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Settings .
5. If necessary, change the  Message Services field.
6. Change the  Enable HTML Email  field to No.User GuideMessages57 
						

							7. Press the Menu key.
8. Click  Save.
Stop loading pictures in HTML email messages
By default, your BlackBerry® device automatically downloads and displays inline pictures that are embedded in HTML email messages.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Settings .
5. If necessary, change the  Message Services field.
6. Change the  Download Images Automatically  field to No.
7. Press the  Menu key.
8. Click  Save.
To view pictures in an HTML email message, press the  Menu key. Click  Get Images .
Turn off the prompt that appears before downloading external pictures in HTML email messages
Some HTML email messages contain links to external pictures on the internet. By default, your BlackBerry® device prompts you before
downloading external pictures.
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  Email Settings .
5. If necessary, change the  Message Services field.
6. Change the  Confirm External Image Download  field to No.
7. Press the  Menu key.
8. Click  Save.
Hide filed email messages
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.
4. Click  General Options .
5. Change the  Hide Filed Messages  field to Yes.
6. Press the  Menu key.
7. Click  Save.
Receive only the first section of long email messages
1. On the Home screen, click the  Messages icon.
2. Press the  Menu key.
3. Click  Options.User GuideMessages58