3M Multimedia Projector Mp8770 Operators Manual

							3M™ Multimedia Projector MP8770© 3M 2000
ENGLISH
10
2.3 System Setup - Connecting Various Equipment (continued)
Apple™ Desktop Mouse - The Macintosh operating system should recognize the MP8770 as a mouse
without any drivers being loaded.
VirtualMouse for PC Computer - For IBM™ compatible computers, the operating systems will need to
be set to "Serial Mouse," "PS/2 Mouse," or "USB Mouse" to recognize the projector as a mouse pointer
device.
Change mouse driver information to "Serial Mouse," "PS/2 Mouse," or "USB Mouse."
a)Windows™ 95/Windows™ 98 - Click "Start;" select "Settings;" select "Control Panel."  Click on
"Mouse;" select the "General" tab; (see what driver is currently loaded and make note of it); select
"Change;" select "Show all devices;" (make note of the current Manufacturer and Model); select
"Standard Mouse Type" for Manufacturer; then select "Standard Serial Mouse," "Standard PS/2
Mouse," or "USB Mouse."   Click OK to change and apply the new driver.  Restart Windows if
prompted. USB mouse emulation is not supported in all versions of Windows 95.
b)Windows™ 3.1 - From "Program Manager" click "Main;" then click "Windows Setup," (make note of
what the current mouse driver is); Click "Options;" then "Change Systems Settings."  Choose
"Mouse."  It should be listed as "Microsoft or IBM PS/2." USB mouse emulation is not supported in
Windows 3.1.
✔ Note
For proper mouse operation, always turn the projector power on first and then power up the computer.
For some laptop computers you may need to disable the internal pointing device (IPD).  This is done through
the BIOS level set up of the particular machine, or it could be listed in a Utilities program group, i.e., Toshiba
Utilities™, or Thinkpad Features™. 
						

							© 3M 2000 3M™ Multimedia Projector MP8770
ENGLISH
11
VIDEORGB
LASER
FOCUS
BLANK AUTOOFF
TIMER
PinP MUTE
+
–
FREEZE
MAGNIFY
+
–
VOLUME
STANDBY/ONPOSITION
ZOOM
+
–
MENU
RESET
INPUT
Press the VIDEO or RGB button to select
the input source. Press again to select the
next source.
STANDBY/ON
Set main power switch to ON. Press
STANDBY/ON button to begin projection
mode (lamp on) or press and hold button
for 1 second to switch to standby mode
(lamp off).
DISC PAD∗/LEFT MOUSE BUTTON
For menu screens, press DISC PAD to
select menu items. For non-menu screens,
press DISC PAD for mouse shift or left
mouse button function.
MENU∗
Press the remote control button to display
the menu screen.
MAGNIFY∗
Press the MAGNIFY (+) to enlarge the
center of the display image.  Press again
to enlarge image to maximum of 4X
magnification.  Press MAGNIFY (-) to
reduce the display image size.  Press OFF
to return to normal image size.  (Can be
used with the POSITION button to select
the image area being magnified.)
PinP∗
Press the PinP button to display a video
signal as a small picture-in-picture screen
in the corner of an RGB display.  Press it
again to enlarge the picture-in-picture
screen size.  Press it a third time to exit
the PinP screen and turn the function OFF.
The position of the picture-in-picture
screen can be controlled by pressing the
POSITION button or from the Image menu.
(Both RGB and Video signals must be
present for the picture-in-picture screen to
operate.)
BLANK ON
Press button to turn ON/OFF the screen
blanking function.
FOCUS
Press (+) or (-) to adjust the image
sharpness.
LASERPress and hold down button to project laser
pointer.
                    CAUTIONTo prevent injury to eyesight, do not point
laser beam at other persons or look directly
into laser beam.
POSITION∗
Press button then use DISC PAD to move
image (RGB signal only) up/down or left/
right.
RESET∗/RIGHT MOUSE BUTTONFor menu screens, press button to return to
initial settings. For non-menu screens, press
button for right mouse button function.
FREEZE∗
Press button to turn ON/OFF the freeze
image function.
VOLUME∗
Press up to increase or down to decrease
speaker volume.
MUTE∗Press button to turn the mute function
(speaker sound) ON/OFF.
TIMER∗
Press button to turn the menu screen timer
ON/OFF. The timer does not display when
the blank function is active.
ZOOMPress (+) to increase or (-) to decrease the
size of the displayed image.
AUTO∗
Press the AUTO button to activate the auto
sync function. The message “AUTO IN
PROGRESS” will display for several
seconds as the projector adjusts the V.
POSIT, H.POSIT. H.PHASE, & H. SIZE
settings.  The Auto Sync function will not
operate under the following conditions:
•Initial screen message NO INPUT IS
DETECTED or SYNC IS OUT OF
RANGE is displayed.
•Freeze and Magnify functions have not
been turned off prior to pressing AUTO
button.
•Software application running on your
computer is not set to maximum
screen size prior to pressing AUTO
button.
2.4 Remote Control Transmitter Identification
∗ This button will not function if the
   message NO INPUT IS DETECTED or
   SYNC IS OUT OF RANGE is displayed. 
						

							3M™ Multimedia Projector MP8770© 3M 2000
ENGLISH
12
Section 3: Basic Operations
Figure 3.1 Projector Controls
3.1 Projector Startup
Caution
M
P
87
7
0
+ZO
O
MMUTEINPUTS
T
A
N
D
B
Y
 O
NRE
SETPOWER
LAMP
TEMPME
NU+F
O
C
U
S
MP8770PORTABLE PROJECTOR
OI
+ZOOMMUTEINPUT
STANDBY ONRESETPOWER LAMP TEMP
MENU
+——FOCUS
EPS-130A
Do not turn off the POWER SWITCH before pressing the STANDBY/ON button.  After the STANDBY/ON button is
pressed, the fan rotates for about 1 minute to cool the projector.
1. Make all cable connections and line hookups with the power off.
2. Turn the POWER SWITCH 
OI of the projector on. The POWER indicator will light up orange.
3. Press the STANDBY/ON button 
STANDBY ON .  The POWER indicator blinks (green) and then lights (green).
The POWER indicator will blink green during warm-up and lamp ignition. When power is turned off,
there is a 60 second reset period before the STANDBY/ON button will function again.
4. Adjust the screen size by pressing the ZOOM button. 
+–ZOOM
5. Adjust the focus by pressing the focus button. +–FOCUS
Press any other button to make the focus screen disappear.
6. Turn on all connected equipment. Refer to section 2.3.
7. Press the INPUT button 
INPUT on the projector or the INPUT SELECT (VIDEO or RGB) button on the
remote to select the source of the signal to be projected on the screen. The selected signal input is
displayed at the bottom right of the screen.  The display will show the last selected input source before
power was turned off.
3.2 Projector Shutdown
1. Press and hold the STANDBY/ON button STANDBY ON  for 1 second. The POWER indicator blinks orange and the lamp
turns off. After approximately 1 minute, the fan stops and the indicator stays orange.
2.Turn the MAIN POWER SWITCH 
OI of the projector off.
3. Attach lens cap to protect projection lens.
4. Disconnect cables if moving projector to new location. 
						

							© 3M 2000 3M™ Multimedia Projector MP8770
ENGLISH
13
Section 4: Adjustments and Functions
4.1 How To Use Height Adjustment Feet
Adjust the image elevation using the height adjustment at the front of the projector.
1. Raise the front end of the projector so the feet are not touching the table top.
2. Push the lock button to unlock the foot.
3. Extend or retract each foot to the desired height.
4. Release the lock button to lock the foot into position.
5. For fine adjustments, rotate each foot.
Caution
Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock
completely, turn the foot adjusters slightly before locking.
Figure 4.1 Height Adjustment
Front View
Side View
0-9
O
OI
12A
U
D
IO
O
U
T A
U
D
IO
 IN
1
2 RGB IN
VIDEO IN
S-VIDEO IN
MONO
R
AUDIO IN
MD05551
M
D
0
5
4
0
1
CONTROL
RGB OUT
U
S
B
R
MP8770 
						

							3M™ Multimedia Projector MP8770© 3M 2000
ENGLISH
14
4.2 Plug & Play Function
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC
(Display Data Channel) compatible. Plug & play is a system configured with peripheral equipment including a computer
and display, and a compatible operating system.
✔ Note
Use the RGB cable included with this projector when using plug & play. With other cables, pins (12) - (15) are
sometimes not connected (effective only for RGB1).
4.3 Freeze Function
The Freeze function is used to display (freeze) a single frame of the image being projected.
✔ Note
The FREEZE function will turn off during the operation of the MENU, FOCUS, PinP, VOLUME, MUTE, BLANK,
TIMER, AUTO or POSITION functions.
4.4 Magnify Function
The Magnify function is used to enlarge a portion of the display image. Press the MAGNIFY (+) button to magnify the
center of the displayed image. Press again to magnify to 4x. Press the MAGNIFY (-) button to reduce image size. Press
OFF to return to normal image size. To move the display area being magnified, press the POSITION button, then use the
DISC PAD to move the magnified area up, down, left or right.
✔ Note
To return to normal display, press the MAGNIFY OFF button. The MAGNIFY  function will turn off during the
operation of the KEYSTONE or AUTO functions.
4.5 Picture-in-Picture
The PinP button on the remote control is used to display a video signal image in the RGB signal image.  Press the PinP
button to display the PinP screen (small size).  Press again to increase the screen size (maximum size screen).  Press a third
time to exit the function and remove the PinP screen.
[small screen size ➔ maximum screen size ➔ OFF]
Both RGB and Video signals must be present for the picture-in-picture function to operate.
1. Select RGB1 or RGB2 input.
2. Start the video input source.
3. Press the PinP button on the remote control to display a small PinP screen in the corner of the projector
image.  Press the PinP button again to enlarge the size of the screen display to maximum.
4. Press the POSITION button on the remote control to change the location of the PinP screen.  The
position of the picture-in-picture screen can also be changed from the Image menu.
5. Press the PinP button a third time to exit the function and remove the PinP screen from the projector
image. 
						

							© 3M 2000 3M™ Multimedia Projector MP8770
ENGLISH
15
4.6 Menu Navigation
Figure 4.2  Menu Button
Figure 4.3 Default Settings
MENU
VOLUME
SETUP
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
INPUTIMAGEOPT.
1. Press any MENU button on projector or remote control MENU button.
On-screen menus are displayed on the screen.
2. Select the menu to be adjusted using the MENU (
) buttons or DISC PAD.
Selected Menu is highlighted.
3. Select the item to be adjusted using the MENU (
) buttons or DISC PAD.
Highlighted items may be adjusted.
✔ Note
Separate settings are provided for the VIDEO, RGB1 and RGB2 input terminals.  Adjustments are saved after
power off.
Factory Default Setting:
To reset a single item from SETUP menu:
1. Select the adjustment item (bright, contrast...).
2. Press the RESET button.  Only the selected item resets. 
						

							3M™ Multimedia Projector MP8770© 3M 2000
ENGLISH
16
Decrease  Increase
Dark 
 Bright
Lower 
 Higher
Soft 
 Sharp
Less 
 More
Red 
 Green
Moves the picture up or down.*
Moves the picture left or right.*
Decreases the picture flicker.*
Widens or Narrows the horizontal
size of picture.*
Less red 
 More red
Less blue 
 More blue
4.7 SETUP
The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4)
or Video (Figure 4.5) menu according to the input source being projected.
RGB signal input
Video signal input
Figure 4.4  RGB Signal Figure 4.5  Video Signal
VOLUME
SETUP
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
INPUTIMAGEOPT.
121
57
800
7
VOLUME
SETUP
CONTRAST
BRIGHT
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
INPUTIMAGEOPT.
VOLUME
BRIGHT
(BRIGHTNESS)
CONTRAST
SHARPNESS
COLOR
TINT
V.POSIT
(V.POSITION)
H.POSIT
(H.POSITION)
H.PHASE
H.SIZE
COLOR BAL R
COLOR BAL B
Adjustment Item
*Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The message
“AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H.
SIZE settings. Auto Adjust can also be executed using the operation buttons of the main unit. Hold down the RESET button
and press the input switch (INPUT) button.
✔ Note
•TINT cannot be adjusted with a PAL, SECAM, N-PAL or M-PAL video signal input.
•TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
•V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.
•Menu operation is not possible during freeze functions.
•Displaying the Setup menu will cancel the magnify and freeze functions. 
						

							© 3M 2000 3M™ Multimedia Projector MP8770
ENGLISH
17
RGB
VideoDisplays the following RGB inputs:
fH:  horizontal sync frequency
fV:  vertical sync frequency
Selects the VIDEO signal format Auto,
NTSC, PAL, SECAM,
  NTSC 4.43, M-PAL, N-PAL
4.8 INPUT
The INPUT sub-menu is used to select the RGB or video input source. The RGB values are shown in figure 4.6. The
VIDEO values are shown in figure 4.7.
Figure 4.6  Input Menu - RGB Figure 4.7  Input Menu - Video
INPUTIMAGEOPT.SETUP
AUTO
NTSC
PAL
SECAM
NTSC4.43
M-PAL
N-PAL
RGB
VIDEO
INPUTIMAGEOPT.SETUP
RGBfH: 48.3 KHz
fV: 60 Hz
VIDEO
Adjustment
AreaValue 
						

							3M™ Multimedia Projector MP8770© 3M 2000
ENGLISH
18
4.9 IMAGE
The IMAGE sub-menu is used to change the image characteristics.
Figure 4.8  Image Adjustment Screens
INPUTIMAGEOPT.SETUP
MIRROR
KEYSTONE
BLANK
START UP
P.IN P.
NORMAL
H: INVERT
V: INVERT
H&V: INVERT
INPUTINPUTIMAGEOPT.SETUP
MIRROR
BLANK
START UP
P.IN P.
INPUT
INPUTIMAGEOPT.SETUP
KEYSTONE
BLANK
START UP
P.IN P.
INPUT
MIRROR
WHITE
BLUE
BLACK
INPUTIMAGEOPT.SETUP
KEYSTONE
START UP
P.IN P.
INPUT
BLANK
KEYSTONE
MIRROR
TURN ON
TURN OFF
INPUTIMAGEOPT.SETUP
KEYSTONE
P.IN P.
INPUT
MIRROR
BLANK
START UP
INPUTIMAGEOPT.SETUP
KEYSTONE
INPUT
MIRROR
BLANK
START UP
P.IN P.
Adjustment
ScreenValue
Reduce distortion Reduce distortion
at bottom of image. at top of image.
Inverts the picture horizontally or ver tically.
H:  INVERT Inverts the picture horizontally.
V:  INVERT Inverts the picture vertically.
H&V:  INVERT Inverts the picture horizontally and vertically.
Selects the blank color.
Enable / disable startup screen
When canceled, the background color will change to blue.
Change the picture in picture screen display position. KEYSTONE
MIRROR
BLANK
STARTUP
P. IN P. 
						

							© 3M 2000 3M™ Multimedia Projector MP8770
ENGLISH
19
4.10 OPT.
The OPT. sub-menu allows you to control communication function.
Figure 4.9  OPT Adjustment Screens
INPUTOPT. IMAGESETUP
COM. BITSCOM. SPEED
LANGUAGETIMER
AUTO OFFSYNC ON G
INPUT
INPUTOPT. IMAGESETUP
COM. SPEED
LANGUAGETIMER
AUTO OFFSYNC ON G
INPUT
7N1
8N1COM. BITS
INPUTOPT. IMAGESETUP
COM. SPEED
TIMER
AUTO OFFSYNC ON G
INPUT
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NORSK
NEDERLANDS
JAPANESELANGUAGE
COM. BITS
INPUTOPT. IMAGESETUP
COM. SPEED
TIMER
AUTO OFF
INPUT
TURN ON
TURN OFF
COM. BITS
SYNC ON G
LANGUAGE
EPS-137A
INPUTOPT. IMAGESETUP
COM. SPEED
LANGUAGE
SYNC ON G
INPUT
AUTO OFF
COM. BITSTIMER
0 min.
INPUTOPT. IMAGESETUP
COM. SPEED
LANGUAGEAUTO OFFSYNC ON G
INPUT
TIMERCOM. BITS
10 min.
INPUTOPT. IMAGESETUP
COM. BITS
LANGUAGETIMER
AUTO OFFSYNC ON G
INPUT
1200
2400
4800
9600
19200COM. SPEED
Adjustment
Screen
1200
7N1
—
—
— Selects the data speed of transmission.
Selects the data format of transmission.
7N1... 7 data-bits, No parity, 1 stop bit.
8N1... 8 data-bits, No parity, 1 stop bit.
Sets the timer ( 0-99 minutes).
Selects the language on-screen menu. (English, French, German,
Spanish, Italian, Norwegian, Netherlands, Japanese)
Selects how long projector will stay on in minutes, if no input is detected.
Select 0 to disable this function.
Sets the SYNC on G function to ON/OFF (supports older monitors). COM. SPEED
COM. BITS
TIMER
LANGUAGE
AUTO OFF
SYNC ON G
Value Default