3M Multimedia Projector Mp8749 Specifications

							MP8749
3M
™
Multimedia Projector
CONNECTIONS BASIC SPECS
COMPUTER
>RGB (x2 input, x1 output)
>
Audio(x2 input, x1 output)
>
Serial ControlVIDEO
>Component (3)
>S-Video
>RCA Composite 
>RCA Audio (L,R) 
>Mouse Emulation
(USBx1)
1-800-328-1371
>2100 lumens
>7 lbs / 3.2 kg
>XGA (1024x768) resolution
>400:1 Contrast ratio
>Horizontal & Vertical keystone
>Whisper mode
>HDTV ready
Order Number: 78-9236-6677-6
“Wherever there’s a great meeting, you’ll find 3M.”™
>Workhorse for everyday meetings
>Great blend of performance,
features, & value
>Use it at the front of the room with the 
built-in wide angle lens
>Ideal for medium size meetings 
Component
Video 
inputS-Video 
inputComputer 
input
USB
InputComputer
Audio
OutputComputer
AudioComputer
Output
(RGB out)
Serial 
Control
www.3M.com / meetings 
						

							3M Visual Systems Division
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-90003M Canada
P.O. Box 5757
London, Ontario, Canada
N6A 4T1
3M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07070
MexicoLitho in U.S.A. © 3M 2003
78-6970-8512-0
Specifications subject to change without notice.
3M is a trademark of 3M Company.  All other trade names referenced are the service marks,
trademarks, or registered trademarks of their respective companies.
Note:These sizes are +10 percent. This is due to variations in the manufacture of the
lens. If you are close to one of the endpoints you should verify with your unit that the
image is the proper size at the proper distance.
Projection Distance Charts - MP8749Distance to Screen      
Minimum Maximum Diagonal Width HeightScreen Size
3.92ft. 4.58ft. 40in. 32in. 24in.
1.2m 1.4m 101.6cm 81.3cm 61.0cm
5.92ft. 7.25ft. 60in. 48in. 36in.
1.8m 2.7m 152.4cm 121.9cm 91.4cm
7.92ft. 9.5ft. 80in. 64in. 48in.
2.4m 3.7m 203.2cm 162.6cm 121.9cm
9.83ft. 11.83ft. 100in. 80in. 60in.
3.0m 3.6m 254.0cm 203.2cm 152.4cm
11.83ft. 14.42ft. 120in. 96in. 72in.
3.6m 4.4m 304.8cm 243.8cm 182.9cm
14.75ft. 17.75ft. 150in. 120in. 90in.
4.5m 5.4m 381.0cm 304.8cm 228.6cm
20ft. 24ft. 200in. 160in. 120in.
6.1m 7.3m 508.0cm 406.4cm 304.8cm
SPECIFICATIONS
OPTICAL
> Brightness: typical (whisper mode): 2100(1680)lumens
> Imager set: 0.9 Polysilicon LCD
> Resolution (native): XGA (1024x768)pixels
> Resolution (maximum): UXGA (1600x1200)pixels
> Aspect ratio: 4:3 native, 16:9
> Colors: 16.7 million
> Screen size (range): 30-300 inches
> Zoom / Focus: Manual
> Zoom ratio: 1.2: 1
> Projection lens: F (focal length):1.7-2.1 (f =27.3 -32.8mm)
> Optional lenses: No
> Contrast ratio (on/off): 400:1
> Lamp: W, Type: 200w UHB
> Lamp life (average): 2000
ELECTRICAL
> Video compatibility:  NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM
> HDTV: 480i, 480p, 525i, 525p, 720p, 1080i
> Keystone Correction: Vertical, and Horizontal 
> Audio: 2 x 1w
> Noise level: normal (whisper): 41 (35)dB
> Feature set: Auto off, 4x digital magnification, blank, mouse 
emulation, My Screen (enduser customizable startup screen)
> Horizontal scan: 15-80 kHz
> Vertical scan: 50-120 Hz
> Power consumption: 310w
> Power supply: Universal: 100-240V AC, 50/60 Hz
> Regulatory approvals: UL, cUL, FCC Part 15 Class B, 
CE, TUV, EN60950
> Operating temperature: 32 - 95 F (0 - 35 C)
> Storage temperature: -4 - 140 F (-20 - 60 C)
SIZE
> Dimensions (WxDxH): 11.7x9 x3 in. (298x228x76mm)
> Weight: 7.0 lbs / 3.2 kg
WARRANTIES
> Projector: 3 Years Standard
> Extended Warranty (optional): Ultra Value (EV8749U)
> Lamp: 1 Year Prorated
ACCESSORIES INCLUDED
>Power Cords (x3 - US, UK, Euro) > Stereo mini audio cable
>RGB computer cable > Component video cable
>RCA™ audio & video cable > Multilanguage Quick 
>Handle strap Start Guide
>Full function remote control > Multilanguage Operators
Guide CD
OPTIONAL ACCESSORIES
>Lamp (EP8749LK) 78-6969-9464-5
>Ceiling Mount, Gyrolock style (EP8746CM) 78-6969-9261-5
>26-47 Adjustable Extension for GyroLock Style Ceiling
Mount (EPGyroExt) 78-6969-9564-2
>Soft Carry Case with Shoulder Strap - Projector & Notebook
Computer (EP7640CC) 78-6969-9203-7
>Rolling Hard Shipping Case (EP8746SC) 78-6969-9259-9
3M™Multimedia ProjectorMP8749
Important Notice
Before using this product, you must evaluate it and determine if it is
suitable for your intended application. You assume all risks and liabili-
ty associated with such use.
Warranty; Limited Remedy; Limited Liability
This product will be free from defects in material and manufacture 
for a period of 3 years from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR 
A PARTICULAR PURPOSE. If this product is defective within the 
warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase
price of the 3M product. Except where prohibited by law, 3M will 
not be liable for any loss or damage arising from this 3M product,
whether direct, indirect, special, incidental or consequential regard-
less of the legal theory asserted. 
						

							

 
 

 
   	 
 
	
 



THIS SERVICE MANUAL IS AVAILABLE IN ENGLISH ONLY.

IF A CUSTOMERS SERVICE PROVIDER REQUIRES A LANGUAGE OTHER
THAN ENGLISH, IT IS THE CUSTOMERS RESPONSIBILITY TO PROVIDE
TRANSLATION SERVICES.

DO NOT ATTEMPT TO SERVICE THE EQUIPMENT UNLESS THIS SERVICE
MANUAL HAS BEEN CONSULTED AND IS UNDERSTOOD.

FAILURE TO HEED THIS WARNING MAY RESULT IN INJURY TO THE SERVICE
PROVIDER, OPERATOR OR PATIENT FROM ELECTRIC SHOCK, MECHANICAL
OR OTHER HAZARDS.

CE MANUEL DE MAINTENANCE NEST DISPONIBLE QUEN ANGLAIS.

SI LE TECHNICIEN DU CLIENT A BESOIN DE CE MANUEL DANS UNE AUTRE
LANGUE QUE LANGLAIS, CEST AU CLIENT QUIL INCOMBE DE LE FAIRE
TRADUIRE.

NE PAS TENTER DINTERVENTION SUR LES QUIPEMENTS TANT QUE LE
MANUEL SERVICE NA PAS T CONSULT ET COMPRIS.

LE NON-RESPECT DE CET AVERTISSEMENT PEUT ENTRANER CHEZ LE
TECHNICIEN, LOPRATEUR OU LE PATIENT DES BLESSURES DUES  DES
DANGERS LECTRIQUES, MCANIQUES OU AUTRES.

DIESES KUNDENDIENST±HANDBUCH EXISTIERT NUR IN ENGLISCHER
SPRACHE.

FALLS EIN FREMDER KUNDENDIENST EINE ANDERE SPRACHE BENTIGT,
IST ES AUFGABE DES KUNDEN FR EINE ENTSPRECHENDE BERSETZUNG
ZU SORGEN.

VERSUCHEN SIE NICHT, DAS GERT ZU REPARIEREN, BEVOR DIESES
KUNDENDIENST±HANDBUCH NICHT ZU RATE GEZOGEN UND VERSTANDEN
WURDE.

WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN
DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN
DURCH ELEKTRISCHE SCHLGE, MECHANISCHE ODER SONSTIGE
GEFAHREN KOMMEN.

ESTE MANUAL DE SERVICIO SLO EXISTE EN INGLS.

SI ALGN PROVEEDOR DE SERVICIOS AJENO A GEMS SOLICITA UN IDIOMA
QUE NO SEA EL INGLS, ES RESPONSABILIDAD DEL CLIENTE OFRECER UN
SERVICIO DE TRADUCCIN.

NO SE DEBER DAR SERVICIO TCNICO AL EQUIPO, SIN HABER
CONSULTADO Y COMPRENDIDO ESTE MANUAL DE SERVICIO.

LA NO OBSERVANCIA DEL PRESENTE AVISO PUEDE DAR LUGAR A QUE EL
PROVEEDOR DE SERVICIOS, EL OPERADOR O EL PACIENTE SUFRAN
LESIONES PROVOCADAS POR CAUSAS ELCTRICAS, MECNICAS O DE OTRA
NATURALEZA.
WARNING
AVERTISSEMENT
WARNUNG
AVISO 
						

							

 
 

 
   	 
 
	
 




ESTE MANUAL DE ASSISTNCIA TCNICA S SE ENCONTRA DISPONVEL
EM INGLS.

SE QUALQUER OUTRO SERVIO DE ASSISTNCIA TCNICA, QUE NO A
GEMS, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA,  DA
RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIOS DE TRADUO.

NO TENTE REPARAR O EQUIPAMENTO SEM TER CONSULTADO E
COMPREENDIDO ESTE MANUAL DE ASSISTNCIA TCNICA.

O NO CUMPRIMENTO DESTE AVISO PODE POR EM PERIGO A SEGURANA
DO TCNICO, OPERADOR OU PACIENTE DEVIDO A` CHOQUES ELTRICOS,
MEC
NICOS OU OUTROS.

IL PRESENTE MANUALE DI MANUTENZIONE 
 DISPONIBILE SOLTANTO IN
INGLESE.

SE UN ADDETTO ALLA MANUTENZIONE ESTERNO ALLA GEMS RICHIEDE IL
MANUALE IN UNA LINGUA DIVERSA, IL CLIENTE 
 TENUTO A PROVVEDERE
DIRETTAMENTE ALLA TRADUZIONE.

SI PROCEDA ALLA MANUTENZIONE DELLAPPARECCHIATURA SOLO DOPO
AVER CONSULTATO IL PRESENTE MANUALE ED AVERNE COMPRESO IL
CONTENUTO.

NON TENERE CONTO DELLA PRESENTE AVVERTENZA POTREBBE FAR
COMPIERE OPERAZIONI DA CUI DERIVINO LESIONI ALLADDETTO ALLA
MANUTENZIONE, ALLUTILIZZATORE ED AL PAZIENTE PER
FOLGORAZIONE ELETTRICA, PER URTI MECCANICI OD ALTRI RISCHI.
ATENO
AVVERTENZA 
						

							

 
 

 
   	 
 
	
 
iii
Direction 2173228±100
Revision 11
AMX±4+ Renewal Parts
(Model 2169360 Series)
IMPORTANT! . . . X-RAY PROTECTION
X-ray equipment if not properly
used may cause injury.
Accordingly, the instructions
herein contained should be
thoroughly  read and understood
by everyone who will use the
equipment  before you attempt to
place this equipment in
operation.  The General Electric
Company, Medical Systems
Group,  will be glad to assist and
cooperate in placing this
equipment  in use.
Although this apparatus
incorporates a high degree of
protection against x-radiation other
than the useful beam, no practical
design of equipment can providecomplete protection. Nor can any
practical design compel the
operator to take adequate
precautions to prevent the
possibility of any persons carelessly
exposing themselves or others to
radiation.
It is important that everyone having
anything to do with x-radiation be
properly trained and fully acquainted
with the recommendations of the
National Council on Radiation
Protection and Measurements as
published in NCRP Reports
available from NCRP Publications,
7910 Woodmont Avenue, Room
1016, Bethesda, Maryland 20814,
and of the International Commissionon Radiation Protection, and take
adequate steps to protect against
injury.
The equipment is sold with the
understanding that the General
Electric Company, Medical Systems
Group, its agents, and
representatives have no
responsibility for injury or damage
which may result from improper use
of the equipment.
Various protective material and
devices are available. It is urged that
such materials or devices be used.
CAUTION: United States Federal
law restricts this device to use by or
on the order of a physician. 
						

							

 
 

 
   	 
 
	
 
iv
CERTIFIED ELECTRICAL CONTRACTOR STATEMENT 
All electrical installations that are
preliminary to positioning of the
equipment at the site prepared for the
equipment shall be performed by
licensed electrical contractors. In
addition, electrical feeds into the
Power Distribution Unit shall be
performed by licensed electrical
contractors. Other connections
between pieces of electrical
equipment, calibrations, and testingshall be performed by qualified GE
Medical personnel. The products
involved (and the accompanying
electrical installations) are highly
sophisticated, and special
engineering competence is required.
In performing all electrical work on
these products, GE will use its own
specially trained field engineers. All of
GEs electrical work on these
products will comply with therequirements of the applicable
electrical codes.
The purchaser of GE equipment shall
only utilize qualified personnel (i.e.,
GEs field engineers, personnel of
third-party service companies with
equivalent training, or licensed
electricians) to perform electrical
servicing on the equipment.
DAMAGE IN TRANSPORTATION
All packages should be closely
examined at time of delivery. If
damage is apparent, have notation
ªdamage in shipmentº written on
all copies of the freight or express
bill before
 delivery is accepted or
ªsigned forº by a General Electric
representative or a hospital
receiving agent. Whether noted or
concealed, damage MUST be
reported to the carrier immediatelyupon discovery, or in any event,
within 14 days after receipt, and the
contents and containers held for
inspection by the carrier. A
transportation company will not pay
a claim for damage if an inspection
is not requested within this 14 day
period.
Call Traffic and Transportation,
Milwaukee, WI (414) 827±3449 /8*285±3449 immediately after
damage is found. At this time be
ready to supply name of carrier,
delivery date, consignee name,
freight or express bill number, item
damaged and extent of damage.
Complete instructions regarding
claim procedure are found in
Section ªSº of the Policy &
Procedure Bulletins.
6/17/94
If you have any comments, suggestions or corrections to the information in this document,
please write them down, include the document title and document number, and send them to:
GENERAL ELECTRIC COMPANY
MEDICAL SYSTEMS
MANAGER ± INFORMATION  INTEGRATION, AMERICAS  W±622
P.O. BOX 414
MILWAUKEE, WI 53201±0414 
						

							

 
 

 
   	 
$( $&! 


	
.

  


$(%! %&$+ -/



















































\



 $  #!!&% 
 	
 	 	 	 	 	 	 	 	 






 * &# ( % %% + !% 	

 














$,!& $  %% + 	
  *
 























  ! %% + 

  ! %% + 
	
 








































$$ %% + 	
 






































 *	 !$&$ %% + 	  *
$ 
 	
 	 	 	 	 	 	
 *	 !$&$ %% + 	  *
$ 
	 	 



















































\

$( &$!%   %% + 	  * 










*	$+ !&$   %% + 	
  * 














$( ! %% + 	


 


































&&$+ $$  $&$ !&$ % + 	  *
$ 	
&&$+ $$  $&$ !&$ % + 	
  *
$ 	 



















































\



%%&& $)$ %% + 	


 





























($ %% +   $+  	
 

























( &$!%$ $ %% + 	
 &
#  * 












 &$ %% + 	
#
 && 


























 
						

							
!
  
 

 
   	 
& 		$  
	

	
:/
 
 
 




 +) 	 	 3/8/1 6+1+7+
	 6  	 .3-+7 84 (88+6< /378118/43 *6/:+ 6+1< ,46  6+1+7+

 6 
 	 **+* )46* 519-7 84 !-+ 	
 93+ 
 	 **+* )411/2846 95*8+* :+68/)1 )41923 .46/=4381 )41923 14)0 18).
 9- 	 	 /-. 25)8 375+)8/43

 +) 	 	 +24:+* 7)6+;7 3* **+* 5/37 84 
	 /8+2 

 +) 	 	 **+* 6+,+6+3)+ 84 ,963/7.+* /8+27 /3 3864*9)8/43
 #+58 
 	 %5*8+* 411/2846 77+2(1< 
	
!

 +)  	 %5*8+* 
	 /8+2 	 84 

	!

 %#
 6  
 %5*8+* 6/:+ 3*1+ 77+2(1
						

							

 
 

 
   	 
!  

&
 
 


 
%#$$     # $ (   
%   $ $ !$
 $   $ $ !  &   !$  $  %#  $   
# $   $#  !$#   $# %$#
	 
 

 

 




	

 



	

  




	

   



	

 



	

  



	

   



	

    



	




	
	

   




	




)
 


	




Furnished items such as manuals, labels and touchup paint are listed in Direc-
tion 2173222±100 AMX±4+ Installattion (Model 2169360 Series).NOTICE