3M Multimedia Projector Mp8725 Operators Manual

							© 3M 1999 3Mª Multimedia Projector MP8725
TECHNICAL
Product name
Model Name
Display system
Panel size
Drive system
Number of pixels
Lens
Lamp
Speaker (stereo)
Power supply
Power consumption
Operating temperature range
Dimensions
Weight
video signal input
terminal
RGB input/output
signal terminal
Control terminal
Technical Appendix
Table of Contents
A.1 Technical Specifications
A.2 Dimensions
A.3 Projector-to-Screen Distance
A.4 Connection to the Video Signal Terminal
A.5 Connection to the RGB Signal Terminal
A.6 Indicator Status
A.7 Connection to the Control Signal Terminal
A.1    Technical Specifications
4 Note
All specifications are subject to change without notice.
Multimedia projector
MP8725
3 LCD panels, RGB shutter system.
0.9 inches (23 mm)
TFT active matrix
786,432 pixels (V768 ´ H1024) per panel.     2.36 million total pixels with 3 panels.
F/Number:  F/2.0 Ð F/2.3                 Focal Length:  F = 38.0 Ð 50.0 mm  (
1.5 in. Ð 2 in.)
Ultra-high performace lamp 120W, UHP
2 x 1 watt
AC100 ~ 120V, 2.6A / AC220 ~ 240V, 1.3A (Universal)
200W
32° ~ 95°F  (0° ~ 35°C)
257.5 mm (W) x 106 mm (H) x 336 mm (D)
10.3 in. (W) x 4.3 in. (W) x 13.4 in. (H) x 13.4 (D)
4.5 kg (10 lbs.)
S VIDEO : Mini DIN4-pin terminal
VIDEO : RCA Jack terminal
AUDIO : RCA Jack terminal
RGB signal : D-sub 15pin (Female)
AUDIO : Stereo mini jack
D-sub 15pin (Male) Liquid crystal
panel
Input/Output
terminal
A.1 
						

							3Mª Multimedia Projector MP8725© 3M 1999
TECHNICAL
330 mm
(13.2 in.)
106 mm
(4.3 in.)336 mm
(13.4 in.)
257.5 mm
(10.3 in.)
EPS-03A
STANDBY/ON
INPUT
MUTE
MENU
RESET
LAMP
TEMPOI
12AUDIO
OUT AUDIO IN
AC IN
12RGB IN
VIDEO S-VIDEO IN
(L)MONO(R) AUDIO IN
CONTROL RGB OUT
A.2    Dimension
A.2 
						

							© 3M 1999 3Mª Multimedia Projector MP8725
TECHNICAL
Distance                Minimum Image               Maximum Image
To Screen Diagonal Width Height Diagonal Width Height
214 cm 102 cm 81 cm 61 cm 130 cm 104 cm 78 cm
(7.0 ft) (40 in.) (32 in.) (24 in.) (51 in.) (41 in.) (31 in.)
311 cm 152 cm 122 cm 91 cm 191 cm 152 cm 114 cm
(10.2 ft) (60 in.) (48 in.) (36 in.) (75 in.) (60 in.) (45 in.)
408 cm 203 cm 163 cm 122 cm 251 cm 201 cm 151 cm
(13.4 ft) (80 in.) (64 in.) (48 in.) (99 in.) (79 in.) (59 in.)
506 cm 254 cm 203 cm 152 cm 315 cm 252 cm 189 cm
(16.6 ft) (100 in.) (80 in.) (60 in.) (124 in.) (99 in.) (74 in.)
604 cm 305 cm 244 cm 183 cm 376 cm 301 cm 226 cm
(19.8 ft) (120 in.) (96 in.) (72 in.) (148 in.) (118 in.) (89 in.)
750 cm 381 cm 305 cm 229 cm 467 cm 374 cm 280 cm
(24.6 ft) (150 in.) (120 in.) (90 in.) (184 in.) (147 in.) (110 in.)
994 cm 508 cm 406 cm 305 cm 622 cm 498 cm 373 cm
(32.6 ft) (200 in.) (160 in.) (120 in.) (245 in.) (196 in.) (147 in.)
4 Note
These sizes are ± 1 inch.  This is due to variations in the manufacture of the lens.  If you are close to one of the
endpoints you should verify with your unit that the image is the proper size at the proper distance.
A.3     Projector-to-Screen Distance
Example of the Multimedia projector and screen installation.  Determine picture size and projection distance as
illustrated below.
A.3
Maximum Zoom
3672107
Distance178 Minimum Zoom
OI12AUDIO
OUT AUDIO INAC IN12RGB INVIDEO S-VIDEO IN
(L)MONO(R) AUDIO INCONTROL RGB OUT 
						

							3Mª Multimedia Projector MP8725© 3M 1999
TECHNICAL
A.5 Connection to the RGB Signal Terminal
Video signal
Horizontal sync signal
Vertical sync signal
Composite sync signal
Audio signalInput
OutputAnalog 0.7Vp-p 75 W termination (Positive polarity)
TTL level (Positive/negative polarity)
TTL level (Positive/negative polarity)
TTL level
200mVrms, 20k W below (MAX 3.0Vp-p)
0 ~ 200mVrms, 1k W
a) Input signal / Output signal
1
2
3
4
5
6
7
8Video signal (Red)
Video signal (Green)
Video signal (Blue)
No Connection
No Connection
Ground (for R)
Ground (for G)
Ground (for B)
9
10
11
12
13
14
15No Connection
No Connection
Ground
SDA (DDC 1/2B)
Horizontal/Composite sync signal
Vertical sync signal
SCL (DDC 1/2B)
b) Signal input terminal / output terminal
A.4 Connection to the Video Signal Terminal
a) Input signal
S-VIDEO signal
VIDEO signal
AUDIO signalInput
Output
Luminance signal 1.0Vp-p, 75 W termination
Chrominance signal 0.286Vp-p (burst signal), 75 W termination
1.0Vp-p, 75W termination
200mVrms, 20 kW below (MAX 3.0Vp-p)
0~200mVrms, 1k W
b) Signal input terminalChrominance signal
Ground
S VIDEO input (Mini DIN4 pin)Luminance signal
Ground
4 Note
Video input signal terminals have priority in the following order:
1.  S-VIDEO input terminal
2.  RCA jack (composite) input terminal
A.4 
						

							© 3M 1999 3Mª Multimedia Projector MP8725
TECHNICAL
A.5
c) Example of computer signal
Note  2: Some input sources may not be displayed properly because they are not compatible with the projector.Note  1: MAC adapter is necessary to set the resolution mode.
Projector is compatible with 13 inch mode and 16 inch mode.
Set all dip switches OFF except those indicated in the chart.
For example:
MAC 13 mode = switch 1, 5 and 6 are ON
MAC 16 mode = switch 2, 5 and 6 are ON
(Example of 16 inch mode)
Resolution HxV Refresh Rate Horizontal Standard Type Note Display
Frequency Dots HxV
640 x 350 70.1 Hz 31.5 kHz VGA-1 1024 x 560
640 x 400 56.4 Hz 24.8 kHz NEC PC9801 1024 x 640
640 x 400 70.1 Hz 31.5 kHz VGA-2 1024 x 640
640 x 480 85.0 Hz 43.3 kHz VESA 863 x 640
640 x 480 59.9 Hz 31.5 kHz VESA VGA-3 1024 x 768
640 x 480 66.7 Hz 35.0 kHz MAC 13 1024 x 768
640 x 480 72.8 Hz 37.9 kHz VESA 1024 x 768
640 x 480 75.0 Hz 37.5 kHz VESA 1024 x 768
800 x 600 56.3 Hz 35.2 kHz VESA 1000 x 750
800 x 600 60.3 Hz 37.9 kHz VESA 1000 x 750
800 x 600 72.2 Hz 48.1 kHz VESA 1000 x 750
800 x 600 75.0 Hz 46.9 kHz VESA 1000 x 750
800 x 600 85.1 Hz 53.7 kHz VESA 800 x 600
832 x 624 74.6 Hz 49.7 kHz MAC 16 980 x 735
1024 x 768 43.5 Hz Interlaced35.5 kHz VESA Compressed 853 x 640
1024 x 768 60.0 Hz 48.4 kHz VESA 1024 x 768
1024 x 768 70.1 Hz 56.5 kHz VESA 1024 x 768
1024 x 768 75.0 Hz 60.0 kHz VESA 1024 x 768
1152 x 864 75.0 Hz 67.5 kHz VESA Compressed 960 x 720
1280 x 960 60.0 Hz 60.0 kHz VESA Compressed 1024 x 768
1280 x 1024 60.0 Hz 64.0 kHz VESA Compressed 960 x 768
1280 x 1024 75.0 Hz 80.0 Hz VESA Compressed 960 x 768 
						

							3Mª Multimedia Projector MP8725© 3M 1999
TECHNICAL
A.6    Indicator Status
The ON, LAMP and TEMP indicators will light or blink in the following cases:
ON indicator
LAMP indicator
TEMP indicator
Indicator status
Lights orange
Blinks green
Lights green
Blinks orange
Lights red
Blinks red
Lights red
Blinks redMeaning
Standby mode
During warming up
During operation
During cooling down
Lamp cannot light
Air filter open
Temperature inside too high
Cooling fan not operatingRemedy
normal
normal
normal
normal
Cool projector by power off for 20 minutes.
Ensure filter is closed.
Let projector cool 20 minutes.  Check air flow and filter.
call your dealer
*When the LAMP indicator lights or blinks, turn the power off.  If the problem persists, contact your dealer.
A.6 
						

							© 3M 1999 3Mª Multimedia Projector MP8725
TECHNICAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 15 D-sub 15pin (Female)
610
15 111
2
3
4
5
643
1 25 Mini Din 6pin Computer
DATA
GND
+5V
CLK Projector
CLK
DATA
SEL0
RTS
+5V
GND
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 15 D-sub 15pin (Female)
610
15 111
2
3
421 Mini Din 4pin Computer
ADS
(POWER ON)
+5V
GND Projector
SDATA
RTS
+5V
GND
43
A.7    Connection to the Control Signal Terminal
ADB mouse
ADB port
PS/2 mouse
PS/2 port
a) Mouse emulation
(1) While the projector and computer are turned OFF, connect the projector and the mouse terminal of
computer using an appropriate cable.  (PS/2, Serial or ADB)
(2) Turn ON the projector.
(3) Turn ON the computer.
(4) Select the correct mouse driver for the application.  See computers User Manual for this procedure.
4 Note
In some Notebook computers which have internal pointing device, mouse emulation will not work unless the
internal pointing device is disabled.  In this case, disable the internal pointing device in BIOS setting.  Check
the computers manual for procedure to follow to disable internal pointing device in BIOS setting.
Caution
Turn off the power to both the projector and computer before connecting. Connect the computer to the
control terminal of the projector using the appropriate cable.
A.7 
						

							3Mª Multimedia Projector MP8725© 3M 1999
TECHNICAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 15 D-sub 15pin (Female)
610
15 11
Computer
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI Projector
SEL0
RTS
GND
RDP
TDP
15 D-sub 9pin 
69
1
2
3
4
5
6
7
8
9
Serial  mouse
A.7    Connection to the Control Signal Terminal  (continued)
b) RS-232 Control Cable  (not included with basic packout)
  This cable is used to directly control the projector without using the Remote Control or Operators Panel.
Serial Mouse cable(male)
A.8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 15 D-sub 15pin (Female)
610
15 11
Computer
CD
RD
TD
DTR
GND
DSR
RTS
CTS
RI Projector
SEL0
RTS
GND
RD
TD
15 D-sub 9pin (male) 
69
1
2
3
4
5
6
7
8
9
RS-232 Cable 
						

							© 3M 1999 3Mª Multimedia Projector MP8725
TECHNICAL
Serial Command Codes
All numbers in this document  are in Hexadecimal.  You must send at the same communication setting
as the projector and use a null modem serial cable to connect to the projector.
There are four types of messages:  1) ASK, 2) REPLY,  3) SET and 4) DEFAULT.
Ask Code:
User:
20 XX
XX is the attribute you are checking.
Projector:
1Y XX Y bytes of data
This is a reply code. The Y is the number of extra bytes that come after the command.
The XX is the same as in the Ask code.
Set Code:
User:
3Y XX Y bytes of data
XX is the attribute you are checking. The Y is the number of bytes for the data.
Projector:
1Y XX  Y bytes of data
This is a reply code.  The Y is the number of extra bytes that come after the command.
The XX is the same as in the Set code.
Default Code:
User:
40 XX
XX is the attribute you are checking.
Projector:
1Y XX  Y bytes of data
This is a reply code.  The Y is the number of extra bytes that come after the command.
The XX is the same as in the Ask code.
Errors:
For an error, the projector will reply with the same code that was sent but with a 0 in the first nibble.
A.9 
						

							3Mª Multimedia Projector MP8725© 3M 1999
TECHNICAL
Serial Command Code Table
Function Command Code # Bytes Data Code Meaning
Mouse 05 1 00 Stop mouse function
01-7F Enable mouse function
Communication 06 1 0X 8N1
1X 7N1
X0 1200 bps
X1 2400 bps
X2 4800 bps
X3 9600 bps
X4 19200 bps
Power 11 1 1E Power off
1F Power on
Mirror 14 1 00 Normal
01 H Invert
02 V Invert
03 H & V Invert
Magnify 15 Set Command
6 00 00 00 00 00 00
00 00-3C 05 X-coordinate = First,
    2-bytes (left top corner)
00 00-0D 04 Y-coordinate = Second,
    2-bytes (00 00, 00 00)
64 00-20 06 Magnification = Third,
    2-bytes (64 00 is x 8,
    20 06 is x1)
Ask Commend
1 00 Magnify Off
01 Magnify On
Freeze 16 1 00 Freeze Off
01 Freeze On
Input 21 1 11 Video 1
12 Video 2
21 RGB 1
22 RGB 2
Video Type 22 2 00 00 Auto
00 01 NTSC
00 02 PAL
00 03 SECAM
Volume 23 1 00-7F 00 - Softest
Mute 24 1 00 Mute off
01 Mute on
Brightness 31 3 00 00 00 - 7F is high end of scale
00 00 7F
Contrast 32 3 00 00 00 - 7F is high end of scale
00 00 7F
Color 33 3 00 00 00 - 7F is high end of scale
00 00 7F
Tint 34 3 00 00 00 - 7F is green end of scale
00 00 7F
Sharpness 35 3 00 00 00 - 7F is sharp end of scale
00 00 7F
A.10