3M Multimedia Projector Mp8660 Quickstart Setup Manual

							MP8660 Quick Reference Setup Instructions
RS-232
Cable
Technical Assistance & Product Information
                    1±800±328±1371
           Internet: [email protected]
  3M 1998 78±6970±8910±6 Cable Connections: Always turn power off when making any cable connections. 
						

							SETUP
IMAGE
OPTION
SETUP
IMAGE
OPTIONBRIGHTNESS
CONTRAST
COLOR
TINT BRIGHTNESS
CONTRAST
POSITION
PHASE
H SIZE
MAC MODE
MP8660 Quick Reference Setup Instructions
MP8660  ProjectorRemote ControlTransmitter
Video Cable 
(S-Video mini DIN4-pin)
Lens CapPower Cord
(US, Euro, UK)
VGA Cable
(15-15 pin M/M)
MAC Adaptor
3-ConductorVideo/Audio CableSerial Mouse
Cable
ADB AdaptorCable PS/2 Adaptor
Cable
RCA to Stereomini jackHexagon
WrenchGender
Changer
Remote Control Transmitter
Navigating System Menus
Projector PackoutProjector Operation
Press STANDBY/ON to switch projector between projection and standby mode.  In
projection mode the lamp is ON.  In standby mode the lamp is OFF.
Press BLANK to display a black background with no image.  Press again to return the 
image to the screen.
Press MUTE to switch the audio sound ON or OFF.
Press ZOOM () to increase or decrease the size of the screen image.
Press FOCUS () to increase or decrease the sharpness of the screen image.
Press VOLUME () to adjust internal/external speaker volume.
Press BACK LIGHT to light the remote buttons.
Press RGB to switch computer video input (RGB1 % RGB2 %RGB1).
Press MENU to display the on±screen menus.  Move the mini±joy stick up/down or 
left/right as needed to nagivate the menu options.  Note: Press SELECT to choose the 
option that is highlighted.
Press SELECT (L) to choose the highlighted menu option.  Refer to On±Screen Menus in
Section 4.
Press RESET to reset menu options to the factory default setting.  Refer to On±Screen
Menus in Section 4.
Pres
s VIDEO to switch between video inputs (VIDEO1 %VIDEO2  % VIDEO1).
When all cable connections are complete, turn on the projector
power first, then the power to the input sources.
1. Turn projector power ªON.º  Main power switch is located on
backside of projector.
2. Remove lens cap.
3.
Press the STANDBY/ON button.  Power indicator turns
from amber to green
4. Power up input devices.
5.
Press the RGB or VIDEO button to select input device.6.Press the ZOOM +/± button to adjust image size.7. Press the FOCUS +/± button to adjust image sharpness.
8. Press the VOLUME +/± button to adjust speaker volume.
9.
Press the MENU button to display and SELECT arrows toselect menu options.
10. To shutdown projector, press STANDBY/ON button. Power indicator
will turn from green to amber.
Press the MENU button on the projector control panel or remote
control keypad to display the Main Menu.  Press the up/down
arrows 
 or move the mini±joy stick up/down to move
vertically within a menu, sub±menu or adjustment screen.  
Press the left/right select arrows 
 on the projector control
panel or move the mini±joy stick left/right to move horizontally
within a sub±menu or adjustment screen. 
Press the SELECT button on the control panel or the SELECT (L)button on the remote to enter a selected adjustment screen.
SETUP
IMAGE
OPTIONRGB ONLYVIDEO ONLY
MESSAGE
ON
OFF MIRROR
NORMAL
H INVERT
V INVERT
H&V INVERT
LENS RETRACT
        AUTO
        MANUALLANGUAGE
AUTO OFF
     YES
     NOBEEP
     ON
    OFF
SPECIAL
   TEST SCREEN
   FIRMWARE REV.
    SVGA56
     H XX.X KhZ
     V XX.X KhZLAMP TIMER
  
   
 1000 Hours 
       PANEL
  
   BLUE   00
   GREEN   00LANGUAGE     BOTH
     FRONT
    REAR
Projector Control Panel
ENGLISH
FRENCH
SPANISH
GERMAN