3M Multimedia Projector Mp8030 Operators Manual

8W 3M 19963ME Multimedia Projector MP8030
Projector-to-Viewing Screen Alignment
The size of the projection screen and the distance of the projector to the screen are important considerations for
determining the best placement of the projector.  After the best projector-to-screen distance has been
determined,  the position of the projection screen in relation to the center of the projection lens must be
considered.
905
Figure 3-9. Top View
b
aa = Distance to viewing screen
b = Center of lens to bottom of...

9 W 3M 19963ME Multimedia Projector MP8030
Adjusting the Projector Elevation
The elevation of the projected image can be adjusted by pushing the lock lever (Figure 3-11) on each projector
leg to the unlock position.  Raise or lower the projector body to extend or retract the projector leg until the
desired elevation (1 to 75) is obtained.  Push the lock lever to the lock position to secure each projector leg.
Lock 
Lever
UNLOCK
LOCK
Foot
Figure 3-11. Projector Leg Adjustment
Note
Both projector legs must...

RGB 1
10W 3M 19963ME Multimedia Projector MP8030
Section 4: Operating the Projector
4-1. Turning On the Projector
Read the Important Safeguards before operating the 3MEMultimedia Projector MP8030.
Refer to Section 3 to make all cable connections. When the input cables and power cords are connected, turn
on the power, adjust the size and focus of the projected image and begin your presentation.
Power On: Turn on the projector power, then turn on the power to your input sources. The projector power
switch...

++ + FOCUS +++
SETUP     INPUT     IMAGE     OPT.
SETUP     INPUT     IMAGE     OPT.
RGB1RGB2VIDEO1  VIDEO2  TEST 
PATTERN
11 W 3M 19963ME Multimedia Projector MP8030
Mute: Press the MUTE  button to turn off the sound to the speakers.  Press again to restore the sound.
Note
The volume level is controlled from the remote control transmitter.
Zoom: Press the ZOOM  
 button to adjust the image size to fill the screen. Press and hold down +
 or
±
 until the image is the desired size.  If you cannot make the...

12W 3M 19963ME Multimedia Projector MP8030
4-4. Adjusting the Picture
The projected image can be adjusted from on-screen menus using either the projector control panel or remote
control transmitter buttons.
For video signals you can adjust:
Brightness (dark to light)
Tint (red to green)  NTSC signals only
Color (low to high)
Contrast (low to high)
Sharpness (low to high)
Language (menus display in seven languages)
Image Inversion (horizontal/vertical)
Video System (AUTO, NTSC, PAL, SECAM)
For Computer...

13 W 3M 19963ME Multimedia Projector MP8030
Some menu options will have an arrow at the end of the line (VIDEO1, VIDEO2).  This arrow indicates that a
sub-menu (Figure 4-4) with additional options will display if you select that option.
VIDEO1  
SETUP     INPUT     IMAGE     OPT.
RGB1
RGB2
VIDEO2  
TEST 
PATTERN
SYSTEM
AUTO
NTSC
PA L
SECAM
              NOTE:
VIDEO1 has an arrow to the
right.  If you select this option
the sub-menu SYSTEM will
display.  The options are:
AUTO, NTSC, PAL and
SECAM.
 or...

14W 3M 19963ME Multimedia Projector MP8030
4-7. Input Menu
4-7-1. Selecting the Input Source
The input source is selected from the Input menu.  The 3MEMultimedia Projector MP8030 has an automatic
video selection function that will choose the correct video system or you can manually select the video system.
Press the left/right menu arrow (
u MENU ) or move the stick switch  left/right to select the INPUT menu
and the VIDEO1/2 SYSTEM sub-menu.  If you select an input source that is not connected, the...

15 W 3M 19963ME Multimedia Projector MP8030
4-8-2. Changing the Screen Background Color (Blank Button)
The background color of the system menus can be white, blue or black. Press the left/right menu arrow
(
u MENU ) or move the stick switch  left/right to select the IMAGE menu and the BLANK sub-menu.
BLANKMIRROR
SETUP     INPUT     IMAGE     OPT.
REVEAL
MENU SIZE




BLUE WHITEBLANK
BLACK
MESSAGE
Select this option:To adjust the following:
WHITEMake screen backgrounds white
BLUEMake screen backgrounds...

16W 3M 19963ME Multimedia Projector MP8030
4-8-5. Display Startup Screen/Error Message
If no input is detected when switching to an RGB or video source, either the startup screen and error message
ªNO INPUT DETECTEDº or a blank screen with no error message will display. Press the left/right menu
arrow (
u MENU ) or move the stick switch  left/right to select the IMAGE  menu and the MESSAGE
sub-menu.
MESSAGEMENU SIZE MIRROR
SETUP     INPUT     IMAGE     OPT.
BLANK
REVEAL




MESSAGE OFF
MESSAGE ON
Select...

17 W 3M 19963ME Multimedia Projector MP8030
4-9-3. Mouse Speed
Press the left/right menu arrow (u MENU ) or move the stick switch  left/right to select the OPT. menu and
the MOUSE sub-menu.
MOUSE COM. BITS COM. SPEED
SETUP     INPUT     IMAGE     OPT.
TIMER
LANGUAGE
AUTO OFF




MEDIUM
FAST MOUSE=
   OSLOW
Select this option:To adjust the following:
Mouse SpeedMouse speed of movement (slow, medium, fast)
4-9-4. Set Countdown Timer
Press the left/right menu arrow (u MENU ) or move the stick switch...