3M Mp8660 Operators Guide
Have a look at the manual 3M Mp8660 Operators Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TECHNICAL A±4 3M 19973M Multimedia Projector MP8660 A±6. Computer (RGB) Signal Connection Modes The MP8660 projector automatically recognizes the following connection modes. Scan FrequencyDot ClockSynchronization Signal ModeH-SizePixel NumberHorizontal (kHz)Vertical (Hz) Dot Clock Frequency (MHz)Horizontal width/polarityVertical width/polarity Computer 2848640 x 40024.8356.4221.05364/±8/±TEXT 56 3800640 x 40031.4770.0925.17596/±2/+TEXT 70 3800640 x 35031.4770.0925.17596/+2/±TEXT 70 4832640 x 40037.8685.0831.50032/±3/+TEXT 85 4832640 x 35037.8685.0831.50032/+3/±TEXT 85 5800640 x 48031.4759.9425.17596/±2/±VGA 60 6832640 x 48037.8672.8131.50040/±3/±VGA 72 7840640 x 48037.5075.0031.50064/±3/±VGA 75 8832640 x 48043.26985.0136.00056/±3/±VGA 85 9896640 x 48034.9866.6231.33464/±3/±MAC 13 A1024800 x 60035.1656.2536.00072/2/SVGA 56 B1056800 x 60037.8860.3240.000128/+4/+SVGA 60 C1040800 x 60048.0872.1950.000120/+6/+SVGA 72 D1056800 x 60046.8875.0049.50080/+3/+SVGA 75 E1048800 x 60053.6785.0656.25064/±3/±SVGA 85 F1152832 x 62449.7374.5557.28364/±3/±MAC 16 1013441024 x 76848.36560.00665.000136/±6/±XGA60 1113281024 x 76856.47670.06975.000136/±6/±XGA 70 1213281024 x 76858.1371.5977.200136/±3/±XGA 72 1313121024 x 76860.0275.02978.75096/+3/+XGA 75 1413121024 x 76848.7860.0064.00096/±6/±MAC 19A 1513281024 x 76860.2474.9380.00096/±3/±MAC 19B Notes: 1. ªModeº denotes the computer mode determined by the projector. The number can be read by the read command through RS-232 interface. 2. Advanced scaling is used for all inputs that are not 800 x 600. 3. Mode 10 and 140: For XGA, full advanced scaling (vertical and horizontal) is used. Modes 11±13 and 14: Only vertical advanced scaling is used. 4. The synchronization signal widths represent the number of dots (horizontal) and the number of lines (vertical). 5. H-size denotes the standard number of dots in the horizontal period.6. For the MAC16 and MAC19A/B computers, you must manually set the MAC MODE to ªONº to determine the correct modes. Set the MAC MODE to ªOFFº for the following computer modes: MAC16 as SVGA75 MAC19A as XGA60 MAC19B as XGA75 See Setup Sub±Menu to set MAC MODE. 7. Computer name (in right column) appears when you display the TEST SCREEN on the projector. Downloaded From projector-manual.com 3M Manuals
TECHNICAL A±5 3M 19973M Multimedia Projector MP8660 A±7. Mouse Emulation Connections Serial Mouse Cable D±Sub 9±pin Projector Computer Mini Din 9±pin 14 6 532 789 1 2 4 3 9 5 6 7 8 Shield1 2 4 3 9 5 6 7 8 Shield 4 6 5 3 2 789 1 PS/2 Adaptor Cable Mini Din 6±pin ProjectorComputer D±sub 9±pin 14 6 532 789 1 2 4 3 9 5 6 7 81 2 4 3 5 6 Shield Shield 43 21 56 ADB Adaptor Cable Shield1 2 4 3 9 5 6 7 8 Shield Mini Din 4±pin Projector Computer 43 2 D±sub 9±pin 14 6 532 789 1 1 2 4 3 Downloaded From projector-manual.com 3M Manuals
TECHNICAL A±6 3M 19973M Multimedia Projector MP8660 A±8. Serial Interface Command Codes RS±232 Connection Cable Projector DIN 8±pinComputer 14532 D-SUB 9-pin 1 4 6 53 2 78 1 2 4 3 9 5 6 7 8 Shield1 2 4 3 5 6 7 8 Shield 6789 Command Code Formats All codes in this document are in ASCII Text. In order to get this to work you must send at the same communication setting as the projector. This should be 9600 8N1. For the rest of this document CR is a carriage return which is code 13. There are two types of commands that can be sent to the projector. They are Write commands and Read commands. Write Command Format User: Code CR Projector: O KCR if it worked or: N GCR if it did not work. Read Command Format User: Code CR Projector: Data OKCR if it worked or: N GCR Downloaded From projector-manual.com 3M Manuals
TECHNICAL A±7 3M 19973M Multimedia Projector MP8660 A±8. Serial Interface Command Codes, continued FunctionCodeMeaning Power On/OffWrite Codes D00W00 D00W01 Read Codes D00RPower On Power Off Returns: 00 ± Standby 01 ± Power on but no lamp 02 ± Power on and lamp03 ± Power off but fan running Input SourceWrite Codes D02W01 D02W02 D02W11 D02W12 D03W00 Read Codes D02RRGB 1 RGB 2 Video 1 Video 2 Shows what input is selected on±screen Returns: 01 ± RGB1 02 ± RGB2 11 ± Video1 12 ± Video2 Volume ControlWrite Codes D04W00 to D04W14 Read Codes D04R Sets volume level to a value between 00 and 14 hex. This corresponds to 20 possible settings. Returns: 00 to 14 hex FocusWrite Codes D05W00 D05W01 D05W10 D05W11 D05W20300ms Clockwise 300ms Counterclockwise Continuous Clockwise Continuous Counterclockwise T urn off motor ZoomWrite Codes D06W00 D06W01 D06W10 D06W11 D06W20300ms Clockwise 300ms Counterclockwise Continuous Clockwise Continuous Counterclockwise T urn off motor MuteWrite Codes D07W00 D07W01 Read Codes D07RMute off Mute on Returns:00 ± mute is off 01 ± mute is on BlankWrite Codes D08W00 D08W01 Read Codes D08RBlank is off ± image is shown Blank is on ± black screen is shown Returns: 00 ± off 01 ± on ContrastWrite Codes D12W00 to D12W14 Read Codes D12R Set contrast level to a value between 00 and 14 hex. This corresponds to 20 possible settings. Returns: 00 to 14 hex BrightnessWrite Codes D13W00 to D13W14 Read Codes D13R Sets brightness level to a value between 00 and 14 hex. This corresponds to 20 possible settings. Returns: 00 to 14 hex Downloaded From projector-manual.com 3M Manuals
TECHNICAL A±8 3M 19973M Multimedia Projector MP8660 A±8. Serial Interface Command Codes, continued FunctionCodeMeaning Tint (Hue)Write Codes D14W00 to D14W14 Read Codes D14R Sets tint (hue) level to a value between 00 and 14 hex. This corresponds to 20 possible settings. Returns: 00 to 14 hex Color (Saturation)Write Codes D15W00 to D15W14 Read Codes D15R Sets color (saturation) level to a value between 00 and 14 hex. This corresponds to 20 possible settings. Returns: 00 to 14 hex PC ModeRead Codes D30RReturns: 0 to 15 hex 2 to 15: See Computer (RGB) Signal Connection (Section A-6)00±Shows no input 01±Shows invalid input MAC ModeWrite Codes D32W00 D32W01 Read Codes D32RMAC MODE ªOFFº MAC MODE ªONº Default is ªOFFº Returns:00±MAC MODE is OFF 01±MAC MODE is ON PhaseWrite Codes D34W00 to D34W80 D35W00 Read Codes D34R Set phase to a value in the range of 00 to 80 hex. Reset phase to default Returns: 00 to 80 hex Display PositionWrite Codes D36W00 to D36WFE D37W00 to D37WFE D38W00 Read Codes D36R D37R Change vertical display position (up/down) from reset position by 00 to FE.Change horizontal display position (left/right) from reset position by 00 to FE.Resets display position Returns: 00 to FE vertical position 00 to FE horizontal position H±SizeWrite Codes D39W00 to D39W80 Read Codes D39R The 00 to 80 denotes the deviation of clock numbers from the standard in one horizontal period. ª40º is zero, ª00º is ±64 and ª80º is +64 decimal. Default value is ª40ºReturns: 00 to 80 hex Remote ControlWrite Codes D50W00 D50W01 Read Codes D50RDisables the remote control Enables the remote control Returns:00±Remote control is disabled 01±Remote control is enabled On-Screen DisplaysWrite Codes D51W00 D51W01 Read Codes D51RDisables on-screen display except ªWARNINGº Enables on-screen display 00±On-screen display is disabled 01±On-screen display is enabled Downloaded From projector-manual.com 3M Manuals
TECHNICAL
A±9 3M 19973M Multimedia Projector MP8660
A±8. Serial Interface Command Codes, continued
FunctionCodeMeaning
Language SelectionWrite Codes
D52W00
D52W01
D52W02
D52W03
Read Codes
D52REnglish
French
Spanish
German
Returns:
00 ± English
01 ± French
02 ± Spanish
03 ± German
MirrorWrite Codes
D53W00
D53W01
D53W02
D53W03
Read Codes
D53RNORMAL
H-INVERT
V-INVERT
H&V-INVERT
Returns:
00±NORMAL
01±H-INVERT
02±V-INVERT
03±H&V-INVERT
Lens Auto RetractWrite Codes
D54W00
D54W01
Read Code
D54RDisables auto retract
Enables auto retractDefault is ªauto retractº
Returns:
00±Auto retract is disabled
01±Auto retract is enabled
Auto OffWrite Codes
D55W00
D55W01
Read Codes
D55RDisables auto off
Enables auto off
Default is ªNOº auto off
Returns:
00±Auto of
f is disabled
01±Auto off is enabled
BeepWrite Codes
D56W00
D56W01
Read Codes
D56RInactivates Beep
Activates Beep
Default is ªActivateº
Returns:
00±Beep is disabled
01±Beep is enabled
SpecialWrite Codes
D57W00Test screen is shown
Green panel positionWrite Codes
D58W00
D58W01
D58W02
Read Codes
D58RSets the green panel to center
Sets the green panel by 1 pixel upSets the green panel by 1 pixel down
Returns:
00±Green panel is in center position
01±Green panel moves 1 pixel up
02±Green panel moves 1 pixel down
Downloaded From projector-manual.com 3M Manuals
TECHNICAL A±10 3M 19973M Multimedia Projector MP8660 A±8. Serial Interface Command Codes, continued FunctionCodeMeaning Blue panel positionWrite Codes D59W00 D59W01 D59W02 Read Codes D59RSets the blue panel to center Sets the blue panel by 1 pixel upSets the blue panel by 1 pixel down Returns: 00±Blue panel is in center position 01±Blue panel moves 1 pixel up 02±Blue panel moves 1 pixel down IR receiver selectionWrite Codes D5AW00 D5AW01 D5AW02 Read Codes D5ARSelects Front and Rear IR Receiver Selects Front IR ReceiverSelects Rear IR Receiver Returns: 00±Front and Rear Receiver is selected 01±Front receiver is selected02±Rear receiver is selected Lamp Timer ResetWrite Codes D60W00 Read Codes D60RResets the lamp timer Returns: xxxx±shows lamp operating time in hours (decimal) TemperatureRead Codes D61RReturns: Shows the status of internal temperature 00±Temperature level 001±Temperature level 1 02±Temperature level 203±Temperature level 3 04±Temperature level 4 05±Temperature level 506±Temperature level 6 ResetWrite Codes D62W00Resets all settings to default Error StatusRead Codes D01RReturns: 00±No error 01±Interlock error02±Lamp error 04±Temperature error08±Fan error 10±Memory error Note: If there is more than one error, the resulting read code will be the sum of the error codes listed above. Example: ForInterlock±01 and Lamp±02, resulting read code is 03. Downloaded From projector-manual.com 3M Manuals
Let us help you make the most of your next presentation. We offer every- thin g from presentation supplies to tips for better meetings. And were the onl y transparency manufacturer that offers a recycling program for your use d transparencies. For late-breaking news, handy references and free produc t samples, call us toll-free in the continental United States and Canada , 7:30 a.m. to 5:30 p.m. (CST). Or visit our Internet Web site. Were easy to reach http://www.mmm.com/presentations e-mail: [email protected] Litho in U.S.A.3M 1997 78-6970-8001±4 Rev. A 3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-90003M Canada P.O. Box 5757 London, Ontario, Canada N6A 4T13M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07070 Mexico3M Europe Boulevard de lOise 9500 Cerge Pontoife Cedex France Printed on 50% recycled wastepaper, including 10% post-consumer wastepaper Downloaded From projector-manual.com 3M Manuals