3M Digital Media System 700 Operating Manual

31 3M
™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Troubleshooting
Troubleshooting (continued)
Audio and Image Issues
Before requesting repair, please check in accordance with the following chart. If the situation cannot be 
corrected, then contact your dealer.
Problem Cause / Solution
Power does not come ON.The main power source is not ON.
The electrical power cord is not plugged in.
The main power source has been interrupted during operation, such as by a 
power outage...

32
3M™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Maintenance
Maintenance
Replacing Projection Lamp
When the lamp’s total working time accumulates to over 2000 hours, the on-screen display (OSD) will deliver a 
message recommending that you replace the lamp. Please contact a service center to replace the lamp as soon as 
possible, or refer to the following instructions to replace it yourself.
To replace the lamp:
1. Turn off the projector by pressing the “power” button on top...

33 3M
™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Specifications
Specifications
Note: These specifications are subject to change without notice.
Optical
Resolution: Native, True XGA (1024 x 768)
Imager: One panel 0.7" DLP projection system
Aspect Ratio: 4:3 native and 16:9 supported
Colors: 16.7 million true colors (24 bit)
Brightness: 1500 ANSI lumens – optimal for Vikuiti™ Super Close Projection
Contrast Ratio: 1300:1
Projection lens: Manually adjustable focus, 130%...

34
3M™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Specifications
Other Features
• Front access input/output interface
• Easy-to-read and operate control buttons and remote control
• Adjustable feet for various platforms
• Auto image synchronization
• Automatically saves user adjustments
• On-screen menu in 9 languages
• Kensington Security Slot
• Two IR receiver windows (front and rear)
Dimensions
13.5" (W) x 12.7" (D) x 6.1" (H)
343.5mm (W) x 321.6mm (D) x...

35 3M
™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Other Care
Caring For The Inside Of The Projector 
In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about 
once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.
Caring For The Lens 
1. Turn off the projector, and unplug the power cord.
2. Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch...

Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on in-
formation believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this 
product, you must evaluate it and determine if it is suitable for your intended application. You assume all 
risks and liability associated with such use. Any statements related to the product which are not con-
tained in 3M’s current publications, or any contrary statements contained...