3D Perception CompactView Sx30 E User Manual

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 16
 
 
14. USING THE PROJECTOR 
After set-up, switch on all equipment. 
 
To switch the projector on, firmly press the POWER button on the keypad or the remote control. 
The STATUS indicator will turn from yellow to green when the projector is switched on. 
 
When only one source is connected, the projector will auto-detect the source. If more sources 
are connected, the projector will display the source with the highest...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 17
 
 
15. MENU SYSTEM 
The menu system gives access to a multitude of image and system controls. 
 
The menu system is structured through a top menu with several sub menus. The sub menus will 
vary depending on the actual source selected. 
 
Top Menu 
 
picture:  
Basic picture controls 
 
advanced:  
Advanced picture controls 
 
audio:  
Sound controls 
 
set up:  
General projector controls 
 
utilities:  
System controls and...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 18
 
 
15.1 Picture Sub-menu 
Video 
 
 
VGA 
  brightness:  
Adjust the brightness  
 
contrast:  
Adjust the contrast 
 
 color:  
Adjust the colour saturation 
 
tint:  
Adjust the video colour shade 
 
sharpness:  
Adjust the video sharpness 
 
freeze frame:  
Lock the image 
 
scaling:  
Select the image format 
 
gamma:  
Optimize the image gamma
 
DVI 
 
 
 
  

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 19
 
 
15.2 Advanced Sub-menu 
Video 
 
 
VGA 
 
  h position:  
Moves the image sideways 
 
v position:  
Moves the image up and down 
 
color temp:  
Changes the colour temperature 
 
custom colour:  
Defines the custom colour temperature 
 
video format:  
Select between manual or auto (video only) 
 
video type:  
Select between video types; DVD and VCR 
(video only) 
 
phase:  
Adjust for a stable image (computer only)...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 20
 
 
15.3 Audio Sub-menu 
volume:  
Adjust the sound volume 
 
bass:  
Adjust the bass level 
 
treble:  
Adjust the treble level 
 
mute:  
Switch the sound on and off
 
 
  

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 21
 
 
15.4 Set-up Sub-menu 
keystone V:  
Adjust the vertical keystone correction 
 
keystone H:  
Adjust the horizontal keystone correction 
 
DPMS:  
Activate/de-activate DPMS: Display Power 
Management Signalling 
 
source scan:  
Switch the source scan on and off 
 
orientation:  
Select between desktop front, desktop rear, 
ceiling front and ceiling rear mode 
 
OSD:  
Select the placement of the On Screen Display...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 22
 
 
15.5 Utilities Sub-menu 
OSD timeout:  
Defines how long OSD is displayed after last 
action 
 
OSD background:  
Select the background mode 
 
reset:  
Resets the projector to the factory default 
settings 
 
service menu:  
For service personnel only 
 
lamp reset:  
Reset the lamp after a lamp change 
 
OSD:  
Turn On/Off the On Screen Display during 
source scan 
 
software version  
Displays the current software...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 23
 
 
16. MAINTENANCE 
The projector may from time to time require cleaning. Never open the projector, as this will void 
any warranties. Refer all service and repair work to qualified personnel. 
 
Only the exterior of the projector may be cleaned. Use a damp cloth. Make sure no liquids enter 
the inside of the projector 
 
 
 
 
 
 
 
Vacuum-clean all the air vents regularly to 
maintain sufficient air flow. 
 
 
 
 
 
 
The...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 24
 
 
17. LAMP REPLACEMENT 
The STATUS lamp on the keypad will turn red when the lamp life expires. In addition, a 
message will appear on the screen; “LAMP LIFE TIME HAS EXPIRED! Please change lamp.”  
 
17.1 Remove old lamp 
Change the lamp when its lifetime expires. Always replace the lamp with the same type and 
rating. 
 
 
Always disconnect the power cord and wait 
until the projector has cooled down (60 
minutes) before...

3D Perception        COMPACTVIEW CLAN 
Revision 3          User Manual 
 
 
 25
 
 
17.2  Insert New Lamp  
 
 
 
 
 
Replace the lamp house (F)  
 
 
 
 
 
Tighten the screws (C) 
 
Fold the handle (E) in place. 
 
Turn the lamp knob (D) clockwise to the 
locked position. 
 
 
Replace the lamp cover (B) and tighten the 
screw (A). 
 
In the “utilities” sub menu, reset the lamp 
timer.