3D Perception CompactView Sx25+e User Manual

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  6 
 
 
Acute exposure to high concentrations of mercury va
por can cause conditions such as lung and 
airway irritation, tightness in the chest, a burnin g sensation in the lungs, coughing, nausea, 
vomiting and diarrhea. Children and fetuses are par ticularly sensitive to the harmful effects of 
metallic mercury to the nervous system.     
Seek medical attention if any of the above symptoms  are experienced or if other unusual 
conditions are experienced following lamp rupture.
 
 
4.4  Remote Control Warning 
Laser radiation class II product; wavelength 670nm;  maximum output 1mW. 
Remote control complies with applicable requirement s of 21 CFR 1040.10 and 1040.11. 
Remote control complies with applicable requirement s of EN 60 825-1: 1994 + A11
 
 
 
 
     
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  7 
 
 
5.  BEFORE SET-UP AND USE 
Be sure you have read the Safety and Warnings chapt
er in this manual before proceeding with 
the set-up and use of the  C
OMPACTVIEW SX25+ projector. 
  
Unpack the supplied parts and familiarize yourself  with the various components. 
  
Remove the lens cap from the projection lens. If yo u switch the projector on with the lens cap in 
place, the lens cap may melt, damaging not only the  lens cap itself, but also the projection lens 
and surrounding parts. 
   
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  8 
 
 
6.  OVERVIEW  
A.  Focus ring 
H. Lamp house 
B.  Zoom ring (optional lens) 
I. Adjustable foot 
C.  IR sensor  J. Foot release 
D.  Ventilation K. Security lock 
E. Keypad 
L. Ceiling Mount 
F. Connector panel 
M. Control Chain In 
G.
 Power connector N. Control Chain Out 
   
  
 
 
 
                
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  9 
 
 
7.  KEYPAD 
POWER   
Switch the projector on and off.   
AUTO  
Automatically detect and synchronize to the signal 
source selected. 
  
MENU  
Activate the menu system. Use the four arrow keys t o navigate and 
 to activate. 
  
SELECT/KEYSTONE
  
Select menu option when the menu system is activate d. When the menu system is not in use 
the menu button will activate the keystone correcti on. Use the four arrow keys to adjust 
horizontally and vertically.   
VOLUME +/-  
Use these two arrow keys to adjust the volume when  the keystone correction and the menu 
system are not activated.   
SOURCE  
Use these two arrow keys to select the source when  the keystone correction and the menu 
system are not activated.    
STATUS  
This is not a key. The LED indicates the current pro jector status. See chapter Status for details. 
 
 
    
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  10 
 
 
8.  STATUS 
GREEN LIGHT  
A permanent GREEN light indicates the  
projector is turned on
 
  
 
YELLOW LIGHT  
A permanent YELLOW light indicates the  
projector is either switched off or is in stand-by  
mode.
 
 
 
YELLOW LIGHT FLASHING   
A flashing yellow light indicates wait. The  
yellow light will flash for a period of 10 -15  
seconds after the power cord is connected and  
for a period of 45 seconds after the projector  
has been turned off. 
 
 
 
RED LIGHT  
A permanent RED light indicates it is time to  
change the projection lamp. Failure to change  
the lamp may lead to the lamp exploding.
 
 
 
RED LIGHT FLASHING   
A flashing RED light indicates the projector is  
overheated. Turn the projector off immediately.  
Check if any air inlets are covered or if the  
ambient temperature is outside specifications.  
Do not remove the power cord.  
 
        
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  11 
 
 
9.  REMOTE CONTROL 
The remote control allows flexible access to the pr
ojector settings, either through direct keys, or 
through the menu system. The remote control can be u sed to emulate the computer mouse 
through the USB interface. 
 
POWER  
Switches the projector between on and standby modes .
 
  
AUTO  
Adjusting the projector to display a correct image, 
including position, width, height, contrast, bright ness 
and overall stability.  
OSD  
Toggle On Screen Display (OSD) feedback on and off.  
When on, all user commands are echoed on screen. 
When off, user commands will not be echoed on  
screen.  
INFO  
Displays source and projector status on screen.    
VIDEO  
Selects the composite video input as signal source    
S-VIDEO 
Selects the super video input as signal source   
YPbPr  
Selects component video input    
DVI 
Selects the DVI input    
VGA 1  
Selects the VGA 1 input   
VGA 2 
Selects the VGA 2 input
 
 
STILL  
Toggles between live and still (frozen) image    
AV MUTE  
Toggles between live and no (muted) sound
 
 
 
    
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  12 
 
 
 
BRIGHT  
Adjusts image brightness from dark to bright    
CONTRAST  
Adjusts the image contrast from soft to hard    
COLOR 
Adjusts the color of the image from pale to saturat
ed 
  
VOLUME  
Adjusts the sound volume   
ASPECT  
Cycles through the aspect ratios available with the  
current source    
MENU  
Toggles the menu system on and off    
TRACKBALL  
When USB cable is connected between PC and  
projector, the trackball is used to move the mouse  
pointer when not in the menu. Use the trackball to  
navigate between options when in the menu.    
LEFT/SELECT 
Use as mouse LEFT key when not in the menu. Use as 
SELECT key when in the menu   
RIGHT  
Use as mouse RIGHT key
 
  
LASER  
Activates the built-in laser pointer.  
CAUTION! Do not point laser beam at people. Do not  
stare into laser beam.   
ARROW KEYS 
Use the four arrow keys as alternatives to the trac kball 
for menu navigation   
SELECT  
Select option in menu. Same function as 
LEFT/SELECT above.
 
 
 
 
    
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  13 
 
 
10.  CONNECTOR PANEL 
 
 
 
A . Component video In (YPbPr). Used for 
high quality video reproduction.   
B . Super video In. Used for improved 
quality video.   
C . Composite video In. Used for standard 
video quality.   
D . DVI - Digital RGB. For a low noise 
computer and video image.   
E . Monitor VGA out: Allows for connection 
to local VGA monitor or daisy-chaining of  
several projectors using VGA. Works with 
VGA inputs only.   
F . VGA - Analogue RGB In (x 2). The 
standard analogue computer graphics  
interface.  
G . RS 232 control In. Allows for wired 
remote control and monitoring of many  
projector functions used in installation  
environments.
 
  H. RS 232 control Out. The secondary output 
connector allows for daisy-chaining, enabling  
both individual and global control and  
monitoring of multiple projectors.   
J . Audio Out. Connection to external audio 
system.    K . RC In. Allows connection of external IR 
receiver or wired remote control. 
 
L . Audio In (x 2).  Allows for the connection of 
up to two audio sources simultaneously. 
  
M.  USB interface.
 Allows for computer 
mouse control. 
 
N . LAN.  Provides access to control and 
monitoring over a Local Area Network   
O . Mains power connector 
 
       
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  14 
 
 
11.  SET-UP  
Before any set-up, switch off all equipment.   
11.1  Set-up computer 
The projector may be connected to up to three compu
ter sources simultaneously, using the 
VGA and DVI inputs.    
The VGA interface is analog and may cause some nois e in the projected image, depending on 
the signal quality from the VGA graphics card in th e computer and cabling. 
  
The DVI (Digital Visual Interface) interface is all  digital and will yield a projected image with very  
low noise.  
Connect the USB cable to allow for remote mouse con trol. 
 
Connect the power cord.    
Connect the RS232 interface to allow for individual  or global control of multiple units in a daisy 
chain configuration.   
Connect the LAN connector for individual control an d monitoring of multiple projectors over 
LAN.
 
 
 
    
						

							3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  15 
 
 
11.2  Set-up Video 
Three video sources may be connected, using the YPb
Pr (component), S-VIDEO (super video) 
and VIDEO (composite video) inputs.    
Component video will display more detailed images.  Composite video yields images with less 
detail.   
In addition, the DVI-D input can be used with video  sources (DVD player fitted with an HDCPTM 
compliant DVI or HDMI connector) for a pure digital  connection. 
  
Connect the power cord.