3D Perception CompactView Sx25+e User Manual

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  26 
 
 
 
16.4  Set Up Sub-menu 
keystone V  
Adjust vertical keystone correction. Compensates fo
r 
the geometrical distortion of the projected image 
resulting from tilting the projector to shoot highe r up 
on the wall.    
keystone H  
Adjust horizontal keystone correction. Compensates  
for the geometrical distortion of the projected ima ge 
resulting from shooting the image at an angle 
sideways on the...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  27 
 
 
16.5  Utilities Sub-menu 
FOR ALL 
 
information  
Displays information about the source and projector
 
status   
OSD  
Turn the On Screen Display on (display) or off (hid e) 
during source scan.  
OSD timeout  
Defines how long OSD is displayed after last key 
action before it disappears from the screen.   
OSD background  
Select background mode, whether translucent or  
opaque.    
reset  
Resets the...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  28 
 
 
16.6  Control Sub-menu 
mode  
Selects between RS232, RIMI (internal) and LAN  
control modes. The projector can be controlled by  
only one of the modes at a time.    
When using the CompactView SX25+I the mode must  
be set to RIMI (Rich Media Interface). When a GCM  
has been installed, the projector will detect its  
presence after a power cycle and select RIMI. 
Note:  Reset to factory default will...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  29 
 
 
17.  MAINTENANCE 
The projector may from time to time require cleanin
g. Never open the projector, as this will void 
any warranties. Refer all service and repair work t o qualified personnel. 
  
Only the exterior of the projector may be cleaned.  Use a damp cloth. Make sure no liquids enter 
the inside of the projector              
Vacuum-clean all the air vents regularly to  
maintain sufficient air...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  30 
 
 
18.  LAMP REPLACEMENT 
The STATUS lamp on the keypad will turn red when th
e lamp life expires. In addition, a 
message will appear on the screen; “LAMP LIFE TIME  HAS EXPIRED! Please change lamp.”  
 
18.1  Remove old lamp 
Change the lamp when its lifetime expires. Always replace the lamp with the same type and 
rating.      
Always disconnect the power cord and wait  
until the projector has cooled...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  31 
 
 
      
Pull the handle (D).    
Remove the lamp house (E). 
 
18.2  Insert New Lamp  
          
Replace the lamp house (E)    
 
       
Fold the handle (D) back in to place.    
Tighten the 3 screws (C)       
 
      

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  32 
 
 
        
Replace the lamp cover (B)    
Tighten the screw (A).    
In the “utilities” sub menu, reset the lamp  
timer. 
 
      

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  33 
 
 
19.  SERVICE INFORMATION 
This product contains no user-serviceable parts.    
If the product fails to function as expected, first
 check that all connections are properly made, 
and that the power cord is properly connected.    
Check that the projector and the video and computer  sources are all switched on. 
 
Cables and cords may break over time. Try changing  the cables and cords in case there is a...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  34 
 
 
20.  TECHNICAL DATA 
20.1  Projector Specifications 
 
Resolution 1400 x 1050 (native) SXGA+ 
Display technology Single chip DLP™ technology by Texas Instruments® 
Display device LVDS DMD™ with DarkChip2™ technology 
Computer Compatibility UXGA, SXGA+, SXGA, XGA, SVGA, VGA   
PC, MAC, SGI and other workstations 
RGBHV, RGBS, RGsB 
Video Compatibility HDTV (1080i, 720p, 576i/p, 480i/p) NTSC, NTSC 4.43,...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  35 
 
 
 
Inputs 2 VGA 15 pin female HD-DSUB analog RGBHV  
1 DVI-D female digital RGB  
1 Component video female 3 x RCA/phono  
1 S-video female 4 pin mini-DIN  
1 C-video female RCA/phono  
2 Audio 3.5 mm female stereo jack 
1 RS 232 9 pin female DSUB (control, firmware updat
e) 
1 USB-B female (control, firmware update)  
1 LAN RJ-45 female (control, firmware update)  
1 Remote Control 3.5 mm female stereo...