3D Perception CompactView Sx15 I User Manual
Have a look at the manual 3D Perception CompactView Sx15 I User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 3D Perception manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 16 14. USING THE PROJECTOR After set-up, switch on all equipment. To switch the projector on, firmly press the POWER button on the keypad or the remote control. The STATUS indicator will turn from yellow to green when the projector is switched on. When only one source is connected, the projector will auto-detect the source. If more sources are connected, the projector will display the source with the highest priority according to the following list: • VGA 1 • VGA 2 • DVI • Component • Super video • Composite video Sound will follow the selected source. Select between the sources by pressing the SOURCE buttons on the keypad or the remote control. Only sources that are active will be displayed. If no source is active, the message “searching” will appear on the screen. If no source is active for a long time, the projector will go into the standby mode. The projector will be switched on if at least one source is activated/re-activated. Can be disabled in the menu. See DPMS in the set up sub menu. To switch the projector off, firmly press the POWER button on the keypad or the remote control. The STATUS indicator will turn from green to flashing yellow, then to yellow when switched off.
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 17 15. MENU SYSTEM The menu system gives access to a multitude of image and system controls. The menu system is structured through a top menu with several sub menus. The sub menus will vary depending on the actual source selected. Top Menu picture: Basic picture controls advanced: Advanced picture controls audio: Sound controls set up: General projector controls utilities: System controls and information
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 18 15.1 Picture Sub-menu Video VGA brightness: Adjust the brightness contrast: Adjust the contrast color: Adjust the colour saturation tint: Adjust the video colour shade sharpness: Adjust the video sharpness freeze frame: Lock the image scaling: Select the image format gamma: Optimize the image gamma DVI
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 19 15.2 Advanced Sub-menu Video VGA h position: Moves the image sideways v position: Moves the image up and down color temp: Changes the colour temperature custom colour: Defines the custom colour temperature video format: Select between manual or auto (video only) video type: Select between video types; DVD and VCR (video only) phase: Adjust for a stable image (computer only) frequency: Adjust the image width (computer only) sharpness: Adjust the sharpness of images DVI
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 20 15.3 Audio Sub-menu volume: Adjust the sound volume bass: Adjust the bass level treble: Adjust the treble level mute: Switch the sound on and off
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 21 15.4 Set-up Sub-menu keystone V: Adjust the vertical keystone correction keystone H: Adjust the horizontal keystone correction DPMS: Activate/de-activate DPMS: Display Power Management Signalling source scan: Switch the source scan on and off orientation: Select between desktop front, desktop rear, ceiling front and ceiling rear mode OSD: Select the placement of the On Screen Display language: Select between languages source info: Displays the source format
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 22 15.5 Utilities Sub-menu OSD timeout: Defines how long OSD is displayed after last action OSD background: Select the background mode reset: Resets the projector to the factory default settings service menu: For service personnel only lamp reset: Reset the lamp after a lamp change OSD: Turn On/Off the On Screen Display during source scan software version Displays the current software version lamp on time: Displays the lamp on time in hours and minutes
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 23 16. MAINTENANCE The projector may from time to time require cleaning. Never open the projector, as this will void any warranties. Refer all service and repair work to qualified personnel. Only the exterior of the projector may be cleaned. Use a damp cloth. Make sure no liquids enter the inside of the projector Vacuum-clean all the air vents regularly to maintain sufficient air flow. The projection lens is sensitive to scratches. Use lens-cleaning tissue, available at all photographic shops when cleaning the projection lens. Use lens cap when not in use.
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 24 17. LAMP REPLACEMENT The STATUS lamp on the keypad will turn red when the lamp life expires. In addition, a message will appear on the screen; “LAMP LIFE TIME HAS EXPIRED! Please change lamp.” 17.1 Remove old lamp Change the lamp when its lifetime expires. Always replace the lamp with the same type and rating. Always disconnect the power cord and wait until the projector has cooled down (60 minutes) before opening the lamp cover. Release the screw (A). Remove the lamp cover (B). Release the screws on the lamp house (C). Turn the lamp knob (D) counter clockwise to the unlocked position. Pull the handle (E). Remove the lamp house (F).
3D Perception COMPACTVIEW CLAN Revision 3 User Manual 25 17.2 Insert New Lamp Replace the lamp house (F) Tighten the screws (C) Fold the handle (E) in place. Turn the lamp knob (D) clockwise to the locked position. Replace the lamp cover (B) and tighten the screw (A). In the “utilities” sub menu, reset the lamp timer.