3Com Router WL-537 User Manual
Here you can view all the pages of manual 3Com Router WL-537 User Manual. The 3Com manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 81
Advanced85 SecuritySelect Security to display the Security screen. Security Screen The Internet connects millions of computer users throughout the world. The vast majority of th e computer users on the Internet are friendly and have no intention of breaking into, stealing from, or damaging your network. However, there are hack ers who may try to break into your network. The options in the Security tab features help you to protect your network. Advanced Settings The Advanced Sett ings section of...
Page 82
86CHAPTER 5: ROUTER CONFIGURATION 3Com recommends that you leave this feature disabled for maximum security. ■Allow PING from the Internet - PING is a utility, which is used to determine whether a device is active at the specified IP address. PING is normally used to test the ph ysical connection between two devices, to ensure that everything is working correctly. By default the Router has PING disabled in order to make the device more difficult to find on th e Internet and less prone to attack....
Page 83
Advanced87 To remotely administer yo ur Router, enter http://xxx.xxx.xxx.xxx:8000 in the location bar of the browser running on the remote computer, where xxx.xxx.xxx.xxx is the Internet IP address of the Router. You may then login using the administration password. Your Internet IP address can be found at the bottom of the screen. . Syslog Select Syslog to display the syslog screen. Check on the check box to enable this feature, and then click Save.
Page 84
88CHAPTER 5: ROUTER CONFIGURATION Status and LogsSelecting Status and Logs from the main menu displays the Status,! Logs -and Routing Table in yur Web browser window. Status The Status screen displays a tabular repres entation of your network and Internet connection. Status Screen
Page 85
Status and Logs89 LogsLogs will allow you to view both the normal events, and security threats logged by the Router. Logs Screen Select Incoming Log or Outgoing Log from the Ty p e drop-down menu. The Incoming Log will display a temporary log of the Source IP Addresses and Destination Port Numbers fo rthe in coming Internet trafic. Click the Save Log button to save this information to !a file on your PC's hard drive. Click the Refresh button to update the log. click the Clean button to clear...
Page 86
90CHAPTER 5: ROUTER CONFIGURATION Select the Routing table tab to display routing information used by the Router. The information is displayed in the form at shown as below. Selecting Support/Feedback from the main menu displays the Support and Feedback screens. Support Support Screen Selecting the Support option on the main menu displays the support links screen, which contains a list of Inter net links that provide information and support concer ning the Router /Routing Table Support/Feedback
Page 87
Status and Logs91 FeedbackFeedback Screen Selecting the Feedback option displays the Feedback screen and allows you to provide feedback to 3Com on the operation of your Router . This screen should not be used to obtain technical support.
Page 89
6 TROUBLESHOOTING Basic Connection Checks■Check that the Router is connected to your co mputers and to the cable/DSL modem, and that all the eq uipment is powered on. Check that the LAN Status and Cable/DSL Status LEDs on the Router are illuminated, and that any corr esponding LEDs on the cable/DSL modem and the NIC are also illuminated. ■Ensure that the computers have completed their start-up procedure and are ready for use. Some network interfaces may not be correctly initialized until the...
Page 90
104CHAPTER 6: TROUBLESHOOTING Connections tab and click on the LAN Settings button at the bottom. Make sure that the Proxy Server option is unchecked. ■If you cannot browse to the Router, use the winipcfg utility in Windows 95/98/ME to verify th at your computer has received the correct address information from the Router. From the Start menu, choose Run and then enter winipcfg. Check that the computer has an IP address of the form 192.168.1.xxx (where xxx is in the range 2-254), the subnet...