The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of 
any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All 
operators of this game are responsible for its operation in accordance with such laws and regulations. The manufac-
turers factory settings for this game may require adjustment in order to comply with laws applicable in an operators 
specific jurisdiction. It is the...
                                            

                                                    NOVEMBER 2000
16-11225
MIDWAY AMUSEMENT GAMES, LLC
3401 N
ORTH CALIFORNIA AVENUE CHICAGO, ILLINOIS 60618 USA
HTTP://WWW.MIDWAY.COM
AMENDMENT
Please note the following changes to part numbers in the original manual 16-40091-101:
• Page 46; the Tamper Resist Screws under the speakers are part number 4108-01193-10B.
 Page 49: The Leg Leveler part number has been changed to 08-8023 and the measurements are now 1/2-13.
The Jam Nut part number is now 4424-01182-00 and measures 1/2-13.
 Page 52; There are two...
                                            

                                                    The Grid - Header Installation Single Header
12
34
TR SCREW
GROUND LUG
RETAINER
FLUORESCENT
ESN NUT
TR SCREW
TR SCREW
FLANGE
KEPS NUT
STUD
RETAINER
ARTWORK
PLEXIGLAS
TR SCREW
Remove all items from carton. Inspect for damage.
Align Retainer holes with holes at bottom of Header 
Housing. Fasten with tamper resistant screws.
Align Fluorescent Lamp Assembly with studs in rear 
of Header Housing. Fasten with ESN nuts, but leave 
a nut off the bottom left stud.
Connect Extender Cable to main harness and run it...
                                            

                                                    Distributor Notice  
Date: 05-08-00  
Game: TouchMaster 8000  
Subject: Revision 9.04  
TouchMaster 8000 Update  
The TouchMaster 8000 is being updated to improve the performance of the Power Cell 
game. 
 
The update consists of 2 eproms that are at locations U51 & U52 on the CPU board.  
You will be issued an RMA for the return of the replaced EPROMS from your Customer 
Service representative.
 
Depending on your jurisdiction (country codes) and cash box setup, you may receive 
specific sets of eproms...
                                            

                                                     
MARCH 2000 
16-80020-101 
 
Manual Includes 
• Installation  Operations  Adjustments  Parts Information  Wiring  Troubleshooting  
 
The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of 
any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All 
operators of this game are responsible for its operation in accordance with such laws and regulations. The 
manufacturer’s factory...