COMDIAL 
Executech 
Single Line 
Telephone 
User’s 
Guide 
Committed to U.S. leadership 
in business communications  
                                            

                                                    COMDIAL 
ExecuTech 
System 2000  
                                            

                                                    To set, 
l For regular HOLD, press HOLD while on line. 
l For exclusive HOLD, press HOLD + HOLD 
while on line. 
To retrieve, 
l Press flashing line button. 
Screened Transfer 
l Answer call. , 
0 Press TRANSCONF. 
l Press DSS button (or dial station (number) 
l When party answers, announce call. 
* Hang up handset (or turn speaker off). 
Unscreened Transfer 
l Answer call. 
0 Press TRANSCONF. 
0 Press DSS button (or dial station number). 
l Hang up. 
If called party is busy or does not answer, the call...
                                            

                                                    COMDV’K 
This publication is applicable for the following 
common equipment: 
MODEL MANUFACTURING CODE 
NO308 REV J and later 
N0308-AT 
REV J and later 
NO61 6 REV J and later 
NO61 6-AT 
REV J and later 
NO820 REV M and later 
N0820-AT 
-REV M and later 
N1024 
REV M and later 
N 1024-AT 
REV M and later 
ExecuTech 
XE Key System 
System Manual 
IMI 66-064.04 
7191.  
                                            

                                                    ExecuTech XE
Key System
System Manual
This publication is applicable for the following common equipment:
NO820Rev P and laterSW release 2.8 and later
N1024Rev P and laterSW release 2.8 and later
pKOl2-002 8IMI 66-097.02
2193 
                                            

                                                    Printed in U.S.A.IMI66–064.04
7/91
XE Key System
System Manual
The information in this publication is applicable
for the following common equipment:
Model
Manufacturing CodeN0308 Rev J and later
N0308-AT Rev J and later
N0616 Rev J and later
N0616-AT Rev J and later
N0820 Rev M and later
N0820-AT Rev M and later
R
ISO 9001 Certified 
                                            

                                                    The message waiting light at any telephone can be 
turned on from another telephone to alert a user that a 
message awaits pickup. 
To turn on MW light, 
. lift handset and listen for intercom dial tone (or FLASH 
for intercom dial tone if on outside line), 
. dial m3, 
. dial extension number of station to be alerted. (The 
MW light of called station will blink on and off.) 
To turn off MW light, 
. lift han&et and listen for intercom dial tone (or FLASH 
for intercom dial tone if on outside line), 
....
                                            

                                                    Personal Ring Tones = 
ITCM *t4 +l (Tonel) 
+ 2 (Tone 2) 
+ 3 (Tone 3) 
+ 4 (Tone 4) 
Auto Dials 
1. Press lTCMt+kl. 
2. Press Auto dial softkey. ‘ 
3. Select line or ITCM choice (optional). 
4. Dial number to be stored (up to 15 digits). 
NOTE: l Digits O-9 can be stored 
l Hookflash can be stored by pressing TAP. 
l Intercom can be stored by pressing ITCM. 
l Pause can be stored by pressing HOLD. 
5a. 
Press T/C and repeat steps 2-4. 
-or- 
5b. Press SPKR to quit. 
6. Log all stored numbers on back of...
                                            

                                                    Comdial Express 
User’s Guide  
                                            

                                                    DIRECTORY 
Autodials 
1. PresslTCM*+i. 
2. Press a programmable button (memory 
location). 
3. Select line button, line group (1 - 4), or ITCM. 
4. Dial number or feature code to be stored (up to 
16 digits). 
NOTE: 
l Digits o-9, *, # can be stored. 
l Hookflash can be stored by press- 
ing TAP. 
l Pause can be stored by pressing 
HOLD. 
5a. Press TRANSlCONF and repeat steps 2-4 to 
program another autodial button. 
-or- 
5b. Press SPKR to quit. 
6. Log secondary stored numbers in directory. 
Station...
                                            

                                                    HoElephoneTM 
User’s Guide 
(Model 3809X)  
                                            

                                                    HoElephontZ 
User’s Guide 
(Models 3910s and 3810X)  
                                            

                                                    Installing Impact Attendant For Windows
Introducing Impact Attendant
Impact Attendant is a software product that when run on a personal computer and works in conjunction with a
digital communications system. The Impact Attendant software allows an attendant to handle a large volume of
call traffic in a short period of time. With this software, the attendant has operational control of the system and the
telephone stations that are a part of it.
Among the features that Impact Attendant makes available to...
                                            

                                                    Installing Impact Call
Introducing Impact Call
Impact Call is client software that runs on a personal computer and works in conjunction with a digital
communications system. The Impact Call software speeds call handling by providing the desktop pc with call
control features.
Among the features Impact Call makes available, are:
•text messaging using wireless pagers,
•access to system-wide features such as Park Orbits,
•full keyboard and mouse interfaces,
•printed reports,
•database access on incoming and...
                                            

                                                    DSU II Digital Expandable Systems
Non-LCD Speakerphone
Station User’s Guide
This publication supports both
Impact and Impact SCS LCD Speakerphones
GCA70–248.10 07/00
Printed in U.S.A.