COMCHAL
ExecuTech
Model 0616X & 0816XElectronic Key Systems
This manual applicable for the following key system models:l 0616X Manufacturing Code 
8xxC and Later
* 0816X All Ma~uf&cturing Codes1.1J
IMI 66-031.043/89 
                                            

                                                    COMDWL 
Executecti 
MODEL 616 AND 616B 
ELECTRONIC KEY SYSTEM 
Committed to U.S. leadership in business communications 
IMI 66-037 
JULY, 1966  
                                            

                                                    COMDWL 
ExecuTech 
Model XE Key System 
System Manual 
This publication is applicable for the 
following common equipment: 
- Model NO308 (Revision B and later) 
- Model NO61 6 (Revision B and later) 
- Model NO820 (Revision C and later) 
-Model N1024 (Revision C and later) 
IMI 66-064.02 
1 O/89  
                                            

                                                    1. 
2. 
3. 
4. Press ITCM % + 1. 
Press Auto dial softkey (memory location). 
Select line key, line group (1 - 4), or ITCM. 
Dial number to be stored (up to 15 digits for 
Model XE System and 16 digits for Model 
2000 System). 
NOTE? . 
Digits O-9, 0, # can be stored 
l Hookflash can be stored by pressing TAP. 
l Pause can be stored by pressing HOLD. 
5a. Press T/C (TRANSCONF) and repeat steps 
2-4 to program another autodial softkey. 
-or- 
5b. Press SPKR to quit. 
6. Log all stored numbers on back of...
                                            

                                                    1’ / 
COMDIAL 
Made &&t in the USA 
ExecuTech 
User’s 
Guide 
l Multiline Key Telephone 
:  
                                            

                                                    COMDIAL 
Executech 
Single Line 
Telephone 
User’s 
Guide 
Committed to U.S. leadership 
in business communications  
                                            

                                                    COMDIAL 
ExecuTech 
System 2000  
                                            

                                                    To set, 
l For regular HOLD, press HOLD while on line. 
l For exclusive HOLD, press HOLD + HOLD 
while on line. 
To retrieve, 
l Press flashing line button. 
Screened Transfer 
l Answer call. , 
0 Press TRANSCONF. 
l Press DSS button (or dial station (number) 
l When party answers, announce call. 
* Hang up handset (or turn speaker off). 
Unscreened Transfer 
l Answer call. 
0 Press TRANSCONF. 
0 Press DSS button (or dial station number). 
l Hang up. 
If called party is busy or does not answer, the call...
                                            

                                                    COMDV’K 
This publication is applicable for the following 
common equipment: 
MODEL MANUFACTURING CODE 
NO308 REV J and later 
N0308-AT 
REV J and later 
NO61 6 REV J and later 
NO61 6-AT 
REV J and later 
NO820 REV M and later 
N0820-AT 
-REV M and later 
N1024 
REV M and later 
N 1024-AT 
REV M and later 
ExecuTech 
XE Key System 
System Manual 
IMI 66-064.04 
7191.  
                                            

                                                    ExecuTech XE
Key System
System Manual
This publication is applicable for the following common equipment:
NO820Rev P and laterSW release 2.8 and later
N1024Rev P and laterSW release 2.8 and later
pKOl2-002 8IMI 66-097.02
2193 
                                            

                                                    Printed in U.S.A.IMI66–064.04
7/91
XE Key System
System Manual
The information in this publication is applicable
for the following common equipment:
Model
Manufacturing CodeN0308 Rev J and later
N0308-AT Rev J and later
N0616 Rev J and later
N0616-AT Rev J and later
N0820 Rev M and later
N0820-AT Rev M and later
R
ISO 9001 Certified 
                                            

                                                    The message waiting light at any telephone can be 
turned on from another telephone to alert a user that a 
message awaits pickup. 
To turn on MW light, 
. lift handset and listen for intercom dial tone (or FLASH 
for intercom dial tone if on outside line), 
. dial m3, 
. dial extension number of station to be alerted. (The 
MW light of called station will blink on and off.) 
To turn off MW light, 
. lift han&et and listen for intercom dial tone (or FLASH 
for intercom dial tone if on outside line), 
....
                                            

                                                    Personal Ring Tones = 
ITCM *t4 +l (Tonel) 
+ 2 (Tone 2) 
+ 3 (Tone 3) 
+ 4 (Tone 4) 
Auto Dials 
1. Press lTCMt+kl. 
2. Press Auto dial softkey. ‘ 
3. Select line or ITCM choice (optional). 
4. Dial number to be stored (up to 15 digits). 
NOTE: l Digits O-9 can be stored 
l Hookflash can be stored by pressing TAP. 
l Intercom can be stored by pressing ITCM. 
l Pause can be stored by pressing HOLD. 
5a. 
Press T/C and repeat steps 2-4. 
-or- 
5b. Press SPKR to quit. 
6. Log all stored numbers on back of...
                                            

                                                    Comdial Express 
User’s Guide  
                                            

                                                    DIRECTORY 
Autodials 
1. PresslTCM*+i. 
2. Press a programmable button (memory 
location). 
3. Select line button, line group (1 - 4), or ITCM. 
4. Dial number or feature code to be stored (up to 
16 digits). 
NOTE: 
l Digits o-9, *, # can be stored. 
l Hookflash can be stored by press- 
ing TAP. 
l Pause can be stored by pressing 
HOLD. 
5a. Press TRANSlCONF and repeat steps 2-4 to 
program another autodial button. 
-or- 
5b. Press SPKR to quit. 
6. Log secondary stored numbers in directory. 
Station...