PN 1886535 Rev A April 2002
©2002 Altek Industries, Inc. Specifications subject to change without notice.
All tights reserved. Printed in U.S.A.
Multifunction Loop Calibrator
Model 934 
                                            

                                                    ALTEK DATA SHEET
ALTEK INDUSTRIES CORP
GENERAL DESCRIPTION
941
MULTI-FREQUENCY CALIBRATOR
MODEL 941
Calibrate your turbine meters, frequency counters, vibration
systems, tachometers, vortex shedders, integrators and any
other frequency devices in the shop, plant or field. Measure from
0.01 Hz to 250.00 KHz with resolution down to 0.01Hz. For your
slower signals source or measure from 4.0 to 2000.0 Counts per
Minute (CPM) or from 10 to 20000 Counts per Hour (CPH).
Quickly indicate process signals...no...
                                            

                                                    Frequency Calibrator
with Totalizer
Model 942
¥ 0.001% accuracyLocked to high stability crystal
¥ Six real world ranges1 to 20000 counts-per-hour
0.1 to 2000.0 counts-per-minute
0.01 to 999.99 Hz
0.1 to 9999.9 Hz
0.001 to 99.999 kHz
0.01 to 250.00 kHz
¥ Calibrate totalizers and batch systemsOutput an adjustable number of pulses
Incremental counter totalizes
¥ ÒQuik-Chek¨
Ó switchStore 18 values for instant recall
Three memories for each range
¥ Three output waveformsSine waves, zero crossing
Square...
                                            

                                                    Dry Contact Module
Model C-41
• Companion to the Model 942Adds dry contact functions
• Simulate dry contactsReplaces signal contacts in powered circuits
• Measure dry contactsRead unpowered contactsExtend the usefulness of your Model 942 Frequency
Calibrator to measure and simulate a wide variety of
relays, mechanical pickups and other dry contact
frequency devices.
Simulate dry contacts
Calibrate inputs to your flowmeters, totalizers,
SCADA, telemetry systems, supervisory control
systems and other...
                                            

                                                    GENERAL DESCRIPTION
SPECIFICATIONS
DATA SHEET 618: 
See Data Sheets 628 for Low Pressure Pump & 638 for High-Pressure Pump
ALTEK
PRECISION VACUUM PUMP - MODEL 618V PRECISION PRESSURE PUMP - MODEL 618P
OUTPUT RANGE:
   Model  618P - Pressure: 145 PSIG/10 BAR
   Model  618V - Vacuum:  600 mm/23 Hg
PRESSURE CONNECTIONS:
  Single 1/8 NPT Female Fitting
SIZE:
  Body Diameter:  1.5/3.8 cm
  Length:  8.5/21.6 cm (collapsed)
  11.5/29.2 cm (extended) Generate pressure or vacuum where you need
it with either...
                                            

                                                    PneuCal III
The 2500T offers
simplistic set-up to
make your job
easier.
The Altek PneuCal III is a highly accurate, digital calibrator for pneumatic field
instrumentation, including valve actuators, P/I transmitters, controllers, gauges,
switches and recorders. It is especially suitable for checking 3 to 15 PSI 
systems. Its dual precision regulators enable output of set and variable 
pressures to control devices, while the switching manifold allows fast selection
among the pressure ports. The unit...
                                            

                                                    PneuCal IV
The 2500T offers
simplistic set-up to
make your job
easier.
The Altek Pneu-Cal IV is a highly accurate, digital calibrator for pneumatic
field instrumentation, including valve actuators, P/I transmitters, controllers,
gauges, switches and recorders. It is especially suitable for checking 3 to 
15 PSI systems. Its dual precision regulators enable output of set and variable
pressures to control devices, while the switching manifold allows fast selection
among the pressure ports. The unit...
                                            

                                                    Process Calibrator
TechChek™ 820 
                                            

                                                    Supplement   
© 2002 Altek Industries, Inc. All rights reserved. Printed in U.S.A.
Manual Title: 820 Supplement Issue:1
Part Number: 1839053 Issue Date: 6/02
Revision/Date: Rev A April 2002
This supplement contains information necessary to ensure the
accuracy of the above manual.
Safety Information
4Caution, risk of Danger; read the manual with particular attention to WARNINGS and
user operation.
-Conforms to European Low Voltage 73/23/EEC, EN61010-1 + Amendments 1,2 and
EMC Directive 89/336/EEC standard...
                                            

                                                    Process CalibratorTechChek™ 830 
                                            

                                                    Supplement   
© 2002 Altek Industries, Inc. All rights reserved. Printed in U.S.A.
Manual Title: 830 Supplement Issue:1
Part Number: 1886520 Issue Date: 6/02
Revision/Date: Rev A April 2002
This supplement contains information necessary to ensure the
accuracy of the above manual.
Safety Information
4Caution, risk of Danger; read the manual with particular attention to WARNINGS and
user operation.
-Conforms to European Low Voltage 73/23/EEC, EN61010-1 + Amendments 1,2 and
EMC Directive 89/336/EEC standard...
                                            

                                                    Process Calibrator
TechChek™ 830-KP 
                                            

                                                    Supplement   
© 2002 Altek Industries, Inc. All rights reserved. Printed in U.S.A.
Manual Title: 830KP Supplement Issue:1
Part Number: 1800470 Issue Date: 6/02
Revision/Date: Rev A April 2002
This supplement contains information necessary to ensure the
accuracy of the above manual.
Safety Information
4Caution, risk of Danger; read the manual with particular attention to WARNINGS and
user operation.
-Conforms to European Low Voltage 73/23/EEC, EN61010-1 + Amendments 1,2 and
EMC Directive 89/336/EEC...