PO Box 16460, Portland OR 97292 - 0460 800 - 852 - 1368 Fax 800 - 582 - 9015
www.aimco - global. com Direct Plug - In Electric Screwdriver
Model AE - 2015
Operations Manual
PO
Box 16460, Portland, OR 97292-0460 • 503-254-6600 • FAX 503-255-2615 LIT-MAN4510-4520 Rev. 03/2016
Printed in USA ©2016 AIMCOOperating Instructions for AE-4510 and AE-4520(ESD) Electra Series Drivers
The AE-4510 and AE-4520(ESD) are easy to use, ergonomically friendly, torque controlled
drivers. Instructions for their use are fairly self-evident and consist of:
•Install a ¼” quick change style driving bit suitable for the screws to be driven into
the...
US-LT Series
OPERATION INSTRUCTIONS
10000
SE Pine Street, Portland, OR 97216 • (503) 254-6600 • Fax (503) 255-2615 LIT-MAN570 Rev. 03/2016
Printed
in USA ©2016 AIMCO It is the responsibility of the employer to place the information on this instruction sheet into the hands of the operator.
WARNING
Always operate, inspect, and maintain this tool in accordance with the American National Standards Institute Safety Code for Portable Air Tools
(ANSI B186.1) and any other applicable safety...
PO
Box 16460, Portland, OR 97292-0460 503-254-6600 Fax 503-255-2615 Lite - Touch Series
Pneumatic Screwdriver Repair Manual
ZZZDLPFRJOR\
EDOFRP
TM-45 and TM-65
Fastener Counter Instructions PO Box 16460, Portland, OR
97292-0460 503-2
54-6600 Fax 503-255-26 15 www.aimco-global.com DETECTOR button toggles between detection displays (screw counts/times).
SET
button ent ers programming mo de and scrolls through men u.
LOC
K but ton isol ates driver from detecting fastening conditio ns and allows
independe nt operation.
The TM-45 System works with AE-2020, AE-4020, AE-4520, and
AE-4520ESD Drivers
The TM-65 System works with...
Quick Start for
TM-45 and TM-65 Fastener Counter PO Box 16460, Portland, OR
97292-0460 503-2 54-6600 Fax 503-255-26 15
1. Attach black power cord to rear of Electra TM box.
2. Plug into 110VAC power.
3. Plug WORK I/P Plug (p lastic stem with connector) into “Work I/P”
receptacle on back of Electra TM sy
stem.
4. O
n front of TM box, attach Electra Screwdriver power cord into
receptacle on lower-right
side.
5. Turn
power on to TM system (will also power Electra Screwdriver).
6. Press “Set”...