PO 
Box  16460,  Portland, OR  97292-0460   503-254-6600   Fax  503-255-2615  Lite - Touch Series  
Pneumatic Screwdriver Repair Manual  
ZZZDLPFRJOR\
EDOFRP 
                                            

                                                    TM-45 and TM-65 
Fastener Counter Instructions  PO Box 16460, Portland, OR 
 97292-0460  503-2
54-6600      Fax 503-255-26 15  www.aimco-global.com DETECTOR button toggles between detection displays (screw counts/times). 
SET 
button ent ers programming mo de and scrolls through men u. 
LOC

K  but ton isol ates driver from detecting fastening conditio ns and allows 
independe nt operation. 
The TM-45 System works with AE-2020, AE-4020, AE-4520, and 
AE-4520ESD Drivers 
The  TM-65 System works with...
                                            

                                                    Quick Start for 
TM-45 and TM-65 Fastener Counter  PO Box 16460, Portland, OR 
 97292-0460   503-2 54-6600   Fax 503-255-26 15
1. Attach black power cord to rear of Electra TM box.
2. Plug into 110VAC power.
3. Plug WORK I/P Plug (p lastic stem with connector) into  “Work I/P”
receptacle on back of Electra TM sy
stem.
4. O

n front of TM box,  attach Electra Screwdriver power cord into
receptacle on lower-right 
side.
5. Turn

 power on to TM system (will also power Electra Screwdriver).
6. Press “Set”...
                                            

                                                     
 
 
 
 
 
 
 
PO Box 16460, Portland, OR  97292-0460  800-852-1368  Fax 800 -582- 9015 
www.aimco -global.com
  
  
 
 
 
 
 
 
 
   
UFT Series  Joint Simulator  
Operations Manual
  
                                            

                                                    URD Series 
OPERATION INSTRUCTIONS 
10000 
SE Pine  Street, Portland,  OR 97216 • (503) 254-6600 • Fax  (503) 255-2615  LIT-MAN680  Rev. 03/2016 
Printed in USA 
©2016 AIMCO It is the responsibility of the employer to place the information on this instruction sheet into the hands of the operator. 
WARNING
 Always operate, inspect, and maintain this tool in accordance with the American National Standards Institute Safety Code for
  Portable Air Tools 
(ANSI B186.1) and any other applicable safety codes...