WATER TEMPERATURE SENSOR
PART NUMBER 30-2011
FEATURES
• Design for Manufacturability
• Cost Effective
• Robust Design
• Few Components & Assembly Processes
• Thermistor Technology
• 100% Calibration Certified
Thermal & Electrical PropertiesMechanical Characteristics
Typical Voltage Supply
Operating Temperature
Resistive Range(
Dissipation Constant‡
Thermal Time Constant‡‡
Accuracy
‡‡‡145 kPa
Thermal Time Constant‡‡Circuit Schematic
‡The ratio, at a specified ambient temperature, of the change in the...
                                            

                                                    Typical Voltage Supply:5V DCSensor Body Material: Brass
:
r
o
t
c
e
n
n
o
C
:
e
r
u
t
a
r
e
p
m
e
T
 
g
n
i
t
a
r
e
p
O PA6
6
Sensor Tip:-40°C to 200°C Hex Size: 12.70 mm (1/2)
Connector:-40°C to 150°C Thread Size: 1/8 - 27 PTF
Resistive Range (Ohms):See TableMating Connector: 12047662
Dissipation Constant: * 12 mW/°
COverall Wieght: 12.2g
Thermal Time Constant: **10 seconds
Accuracy: See Tabl
e
TEMPERATURE SENSOR
PRODUCT DATA
TEMPERATURE SENSOR
  - Few Components 
  - Few Assembly Processes
  -...
                                            

                                                      
 
AEM Performance Electronics 
2205 126
th Street Unit A, Hawthorne, CA. 90250 
Phone: (310) 484-2322 Fax: (310) 484-0152 
http://www.aemelectronics.com 
Instruction Part Number: 10-2011 Rev B 
© 2011 AEM Performance Electronics 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The model 30-2011 Water Temp Sensor kit is specifically designed for fluid temperature measurements in automotive 
systems. The kit contains One GM style temperature sensor, the mating connector, 2 terminals and a weld in aluminum...
                                            

                                                     
 
 
 
AEM Performance Electronics 
2205 126th Street Unit A, Hawthorne, CA. 90250 
Phone: (310) 484-2322 Fax: (310) 484-0152 
http://www.aemelectronics.com 
Instruction Part Number: 10-2012 Rev 01 
© 2011 AEM Performance Electronics 
 
Part Number 30-2012 
Fluid Temperature Sensor 
Kit Contents: 
1 x Fluid Temp Sensor 
1 x Mating Connector 
1 x Connector Lock 
3 x Terminal 
 
 
Specs: 
Thread Size 1/8”NPT 
Hex Size ½” 
Typical Voltage Supply 5 Vdc 
Operating Temperature 
  Sensor Tip -40C to 200C...
                                            

                                                     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INSTALLATION 
 
1. Disconnect the negative battery cable. 
2. Using the supplied Stainless Steel 1/8”NPT compression mount, mount the EGT 
thermocouple as shown in Figure 2.   Common locations for mounting the EGT 
thermocouple are 1-2 inches from the exhaust port, 2-3 inches before the turbine 
inlet, or in the header collector. 
3. Connect the EGT thermocouple to the extension harness as shown in Figure 3. 
4. Connect the 3-pin connector on the...