Xerox WorkCentre 4112 User Manual

Product Overview
Xerox 4112/4127 Copier/Printer 1-13
System Administration Guide
Changing the Power Saver Mode time interval
To activate the Power Saver feature, set the Sleep Mode button to Enabled, and set the Low 
Power Mode and the Sleep Mode time intervals as follows:
Note
The amount of time that passes before the machine enters Low Power Mode and Sleep Mode 
can be specified in 1 minute increments, from 1 to 240 minutes for each mode.
1. Enter the System Administrator Mode (Chapter 1 Entering the...

Product Overview
1-14   System Administration Guide
Xerox 4112/4127 Copier/Printer
4. Select Power Saver/Energy Saver, and select Change Settings. 
5. Using the up/down arrow buttons, configure a power saver mode migration time from 1 to 
240 minutes, in 1 minute increments.
a.From Last Selection to Low Power Mode:Set the time to move to the Low Power 
Mode after the last operation.
Note
The default for From Last Selection to Low Power Mode is 15 minutes. 
b.From Last Selection to Sleep Mode:Set the time...

Product Overview
Xerox 4112/4127 Copier/Printer 1-15
System Administration Guide
Exiting the Power Saver Mode
The following describes how to exit the Power Saver mode. The Power Saver mode is exited in 
the following instances:
• By pressing the Power Saver button
•Receiving Print Data
1. Press the Power Saver button.
Interface cables
When connecting to a network, use the Ethernet interface.
Using the Ethernet Interface
The Ethernet interface supports the following 2 types:
•100Base-TX
•10Base-T
This...

Product Overview
1-16   System Administration Guide
Xerox 4112/4127 Copier/Printer
Internal Fonts
The listed fonts are available as standard fonts on the machine: 
Stroke fonts (for PCL5 and 
HP-GL/2)European Stroke fonts
Outline 
fontsEuropean HP-GL/2Roman
Sans Serif
PDFArial
Arial Italic
Arial Bold
Arual
Bold Italic
Courier
Courier Italic
Courier BoldCourier Bold Italic
Symbol
Times New Roman
Times New Roman Bold 
Italic
ITC Zepf Dingbats
GoldSEMM
Gold SAMM
PCLCG Times
CG Times Italic
CG Times Bold
CG...

Product Overview
Xerox 4112/4127 Copier/Printer 1-17
System Administration Guide Outline 
fontsEuropean PCL 
continuedAlbertus Medium
Albertus Extra Bold
Clarendon Condensed
Coronet
Marigold
Arial
Arial Italic
Arial Bold
Arial Bold Italic
Times New
Times New ItalicNew Century 
Schoolbook Italic
New Century 
Schoolbook Bold
New Century 
Schoolbook Bold 
Italic
ITC Avant Garde 
Book
ITC Avant Garde 
Book Oblique
ITC Avant Garde 
Demi
ITC Avant Garde 
Demi Oblique
ITC Zapf Chancery 
Medium Italic
ITC Zapf...

Product Overview
1-18   System Administration Guide
Xerox 4112/4127 Copier/Printer
Downloaded From ManualsPrinter.com Manuals 

Xerox 4112/4127 Copier/Printer 2-1
System Administration Guide
2Configuration
TCP/IP (LPD/Port 9100)
Preparations
The following items are required when using TCP/IP (LPD/Port 9100) protocol on the machine.
• A network environment where TCP/IP can be used.
• The "CentreWare Utilities" CD-ROM, which is included with this product.
Configuration procedure
Overview
The machine can be connected to computers using TCP/IP (LPD/Port 9100) protocol.
The following is the procedure to use TCP/IP(LPD/Port...

Configuration
2-2   System Administration Guide
Xerox 4112/4127 Copier/Printer
Note
Enable the SOAP port and the SNMP port in most cases.
1. Enter the System Administrator Mode (Chapter 1 Entering the System Administrator mode 
on page 1-10.)
2. Enable either the LPD port or the Port 9100 port as appropriate. In this example, the LPD 
port is enabled.
a. Select System Settings.
b. Select Connectivity & Network Setup.
c. Select Port Settings.
d. Select LPD and then select Change Settings.
e. Select LPD -...

Configuration
Xerox 4112/4127 Copier/Printer 2-3
System Administration Guide
NetWare
Preparations
The following items are required when using NetWare network:
•A NetWare server.
• The "CentreWare Utilities" CD-ROM which is included with this product.
Configuration procedure
Overview
The machine supports PServer mode for both the NetWare Directory Service and Bindery 
Service. PServer mode enables the machine to function as a print server and to capture print 
jobs in the print queue to output....

Configuration
2-4   System Administration Guide
Xerox 4112/4127 Copier/Printer
Note
Refer to the manual contained in the “CentreWare Utilities” CD-ROM for the configuration 
procedure.
Microsoft Network (SMB)
Preparations
The following items are required when using a Microsoft Network (SMB):
• Network environment where either TCP/IP or NetBEUI can be used.
• The "CentreWare Utilities" CD-ROM, which is included with this product.
Configuration procedure
Overview
The machine can be connected to...