Vivitek Projector DW6831 User Manual
Have a look at the manual Vivitek Projector DW6831 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
16
Lens Shift
The DU6871/DW6851/DX6831 projector has the lens shift feature and the im\
age can be
vertically shifted without moving the projector� The lens shift bit is shown in the percentage of
the screen height� The project installed on the desk can move up and down by 50% (0�5V)�
Vertical lens shift
The project installed on the desk can move up and down by 50% (0�5V)�
Vertical shift
Projected image
heightProjected
image
height V
0.5V
(Max.)
0.5V
(Max.)
The lens of the ceiling mount projector...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-15.png "Page 16
16
Lens Shift
The DU6871/DW6851/DX6831 projector has the lens shift feature and the im\
age can be
vertically shifted without moving the projector� The lens shift bit is shown in the percentage of
the screen height� The project installed on the desk can move up and down by 50% (0�5V)�
Vertical lens shift
The project installed on the desk can move up and down by 50% (0�5V)�
Vertical shift
Projected image
heightProjected
image
height V
0.5V
(Max.)
0.5V
(Max.)
The lens of the ceiling mount projector...")
![Page 17
17
Connecting the Projector to Other Equipment
Follow the instructions below to connect the DU6871/DW6851/DX6831 projec\
tor to the
video source, external control equipment (if any) and AC power supply� When connecting
to the equipment, use the correct signal cable to connect to every signa\
l source and
ensure that the cable is securely connected� Fasten the nut on the joint and connect the
signal source equipment to the projector according to the figure below.
Connecting to the personal computer...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-16.png "Page 17
17
Connecting the Projector to Other Equipment
Follow the instructions below to connect the DU6871/DW6851/DX6831 projec\
tor to the
video source, external control equipment (if any) and AC power supply� When connecting
to the equipment, use the correct signal cable to connect to every signa\
l source and
ensure that the cable is securely connected� Fasten the nut on the joint and connect the
signal source equipment to the projector according to the figure below.
Connecting to the personal computer...")
![Page 18
18
Connecting to the control equipment
The projector has the following control port for connecting to the contr\
ol equipment:
3D sync signal transmitter (IR)
• HDBaseT/LAN (Network control): The projector supports network control� LAN and
HDBaseT share the port� If only network control is used, you can connect the LAN on the
projector to PC or through the local network� Refer to the remote control guidelines for
detailed information�
• RS-232 (RS-232c control): The projector supports RS-232c serial...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-17.png "Page 18
18
Connecting to the control equipment
The projector has the following control port for connecting to the contr\
ol equipment:
3D sync signal transmitter (IR)
• HDBaseT/LAN (Network control): The projector supports network control� LAN and
HDBaseT share the port� If only network control is used, you can connect the LAN on the
projector to PC or through the local network� Refer to the remote control guidelines for
detailed information�
• RS-232 (RS-232c control): The projector supports RS-232c serial...")
![Page 19
19
Connecting to the Screen Trigger
If your projection system includes the Electric projection screen and ot\
her 12V trigger device,
you can connect these devices to the 12V trigger to output and configure the output 12V
signal settings, such as automation and the aspect ration of 16:10 throu\
gh OSD control to
Trigger� The projector will output 12V signals according to the current settings \
of the aspect
ratio and trigger when turned on� You can use the signal to control the screen or device�...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-18.png "Page 19
19
Connecting to the Screen Trigger
If your projection system includes the Electric projection screen and ot\
her 12V trigger device,
you can connect these devices to the 12V trigger to output and configure the output 12V
signal settings, such as automation and the aspect ration of 16:10 throu\
gh OSD control to
Trigger� The projector will output 12V signals according to the current settings \
of the aspect
ratio and trigger when turned on� You can use the signal to control the screen or device�...")
![Page 20
20
Connecting to the External HDBaseT Transmitter
The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter
(optional), the video, RS-232 and LAN signals can be sent to the proje\
ctor via a single
RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of
the IR remote control, the control signals from the IR remote control ca\
n be sent to the
DU6871/DW6851/DX6831 projector via the RJ-45 cable�
VGA INRJ45
Lan HDMIRS232RJ45
HDBaseT
YPbPr
VGA...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-19.png "Page 20
20
Connecting to the External HDBaseT Transmitter
The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter
(optional), the video, RS-232 and LAN signals can be sent to the proje\
ctor via a single
RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of
the IR remote control, the control signals from the IR remote control ca\
n be sent to the
DU6871/DW6851/DX6831 projector via the RJ-45 cable�
VGA INRJ45
Lan HDMIRS232RJ45
HDBaseT
YPbPr
VGA...")
![Page 23
23
Lens Shift
The projector has the features to control the screen size, location and \
focusing� Press the
Lens Shift button on the control panel or the remote control to shift, z\
oom in/out or focus
on the projected image�
Vertical lens shift
Press ▲▼ to move upward or downward to vertically move the projected image.
Horizontal lens shift
Press ◄ ► to move to the right or left to horizontally move the projected image.
ENGER
ENGER
++
- -
Zoom in/out
Press ZOOM+ or ZOOM- on the control panel to...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-22.png "Page 23
23
Lens Shift
The projector has the features to control the screen size, location and \
focusing� Press the
Lens Shift button on the control panel or the remote control to shift, z\
oom in/out or focus
on the projected image�
Vertical lens shift
Press ▲▼ to move upward or downward to vertically move the projected image.
Horizontal lens shift
Press ◄ ► to move to the right or left to horizontally move the projected image.
ENGER
ENGER
++
- -
Zoom in/out
Press ZOOM+ or ZOOM- on the control panel to...")
![Page 24
24
Starting to Use the Projector-Operation
Select the input source
Push the INPUT button on the remote
control to directly select the input source�
Select the aspect ratio
Push ASPECT to adjust the aspect ratio of
the image�
Use OSD
1� Push the MENU button on the remote control or the control panel to show \
the OSD
main menu�
2� Press ◄ or ► to select the sub-menu.
3� Press ▲ or ▼ to select the item of the sub-menu.
4� The selected item will be highlighted, press ▲ or ▼ to select the settings of the...](http://img.usermanuals.tech/thumb/5166/99691/w64_projector_manual_8285_d-23.png "Page 24
24
Starting to Use the Projector-Operation
Select the input source
Push the INPUT button on the remote
control to directly select the input source�
Select the aspect ratio
Push ASPECT to adjust the aspect ratio of
the image�
Use OSD
1� Push the MENU button on the remote control or the control panel to show \
the OSD
main menu�
2� Press ◄ or ► to select the sub-menu.
3� Press ▲ or ▼ to select the item of the sub-menu.
4� The selected item will be highlighted, press ▲ or ▼ to select the settings of the...")
21 Connecting to AC Power Supply The AC power cord is included in the box, plug the power cord to the AC socket (AC100V- 240V) on the back of the projector and plug another end of the AC power cord to the AC outlet� Note: • Make sure the power system (including the project and power supply system) is properly grounded before connecting to the AC power. The projector may be damaged without the grounding circuit. • This is a high-brightness and high-watt projector. Do not modify the AC power cord or replace the power cord arbitrarily to avoid causing damages to the projector or safety problems. Turn on Press ON on the remote control or POWER on the projector � The power and lamp LED indicator flashes green to show warm-up. MENUEXIT POWER INPUTA UT O SY NC ASPEC T or The power and lamp LED indicator will light green and the projector ligh\ ts turn on when the projector is ready for use. Refer to the chapter of LED statuses if the LED indicator flashes red� Please contact the Vivitek licensed dealer if the problem cannot be solved� Starting to Use the Projector Setup DU6871/DW6851/DX6831 DLP Projector - User's Manual
22 Changing the OSD Language The project can show the English, French, Spanish, German, Portuguese, Simplified Chinese, Traditional, Japanese and Korean menu. Press MENU to show OSD and press◄► to select control items. Press▲▼ to select language, ▲▼ to select the language to be used, Enter to confirm the selection. Eco Network Power Auto Power off Network Auto Power On Projector Control Startup Logo RS232 Trigger < Off > Enter Dynamic Black Auto Search Lan guage 3D < Off > < Off > Enter Enter INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < Standard > < Off > < Both > Enter < Off > < Off > Language English Franais Espaol Deutsch Por tugu ês 简体中文 繁體中文 日本語 한국어 Adjusting the projection mode The projection mode has influence on the direction of the projected image and cooling. The projection mode option can be used to change the direction of the pr\ ojected screen and the cooling fan speed to ensure that the projector is properly coole\ d� The improper projection mode settings may trigger over temperature protection or redu\ ce the service life of lamps and elements� Please make sure the correct projection mode is set when the projector is installed� Press the MENU button on the remote control or the control panel to set \ the projection mode and select ALIGNMENT→ Projection Mode • Front: Installed on the desk and the projection screen will be shown in the no\ rmal direction� • Rear: Installed on the desk� The image will be projected from behind the screen and the projected image will be overturned� • Ceiling+Front: Ceiling mounted� The image will be projected from the front of the screen and will be overturned on 180 degree� The cooling fan speed will be adjusted� • Ceiling+Rear: Ceiling mounted� The image will be projected from behind the screen and the projected image will be overturned on 180 degree� The cooling fan speed will be adjusted� • Up+Front: The projector is installed upwards and the image is projected upward� The cooling fan speed will be adjusted� • Down+Front: The projector is installed downwards and the image is projected downward� The cooling fan speed will be adjusted� Projection Mode Fan Mode Center Lens Lens Control Lens Memory < Front > Digital Alignment Keystone H/V Alignment Enter Enter < Normal > Execute Enter Enter INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < 0 > DU6871/DW6851/DX6831 DLP Projector - User's Manual
23 Lens Shift The projector has the features to control the screen size, location and \ focusing� Press the Lens Shift button on the control panel or the remote control to shift, z\ oom in/out or focus on the projected image� Vertical lens shift Press ▲▼ to move upward or downward to vertically move the projected image. Horizontal lens shift Press ◄ ► to move to the right or left to horizontally move the projected image. ENGER ENGER ++ - - Zoom in/out Press ZOOM+ or ZOOM- on the control panel to enlarge (zoom in) or redu\ ce (zoom out) the projected image size� Focus Press ZOOM+ or - on the control panel to make the screen clear � ENGER ENGER ++ - - DU6871/DW6851/DX6831 DLP Projector - User's Manual
24 Starting to Use the Projector-Operation Select the input source Push the INPUT button on the remote control to directly select the input source� Select the aspect ratio Push ASPECT to adjust the aspect ratio of the image� Use OSD 1� Push the MENU button on the remote control or the control panel to show \ the OSD main menu� 2� Press ◄ or ► to select the sub-menu. 3� Press ▲ or ▼ to select the item of the sub-menu. 4� The selected item will be highlighted, press ▲ or ▼ to select the settings of the item and press ENTER or the ENTER on the control panel to adjust the value of the item� 5� Press MENU to return to the previous menu� 6� Press MENU in the main menu or EXIT to close the OSD menu� BLANK 3D MODE DU6871/DW6851/DX6831 DLP Projector - User's Manual
25 OSD Menu Tree Main menuSub-menu INPUT Input SelectionHDMI DVI VGA Component/BNC DisplayPort HDBaseT Test Pattern Color Bar, Crosshatch, Burst, Red, Green, Blue, White, Black, H Ramp Uncorrected Red, Uncorrected Green, Uncorrected Blue, Uncorrected White, Uncorrected Black, Off Color Space Auto YCbCr YPbPr RGB-PC RGB-Video Input Lock Auto 48Hz 50Hz Blue Background Logo Blue Black White Auto Sync Adjust Auto Always PICTURE Picture ModeHigh Bright Presentation Video Contrast Brightness Saturation Hue Gamma Film Graphics Video Linear 2�2 ColorColor TempNative 5400K 6500K 9300K Color TrimRed Lift Green Lift Blue Lift DU6871/DW6851/DX6831 DLP Projector - User's Manual
26 Main menuSub-menu PICTUREColorTrimRed Gain Green Gain Blue Gain HueRed Green Blue Cyan Magenta Yellow SaturationRed Green Blue Cyan Magenta Yellow GainRed Green Blue Cyan Magenta Yellow White BalanceRed Green Blue Sharpness Noise Reduction Aspect Ratio05:04 04:03 16:10 16:09 1�88:1 2�35 LetterBox Native Unscaled OverscanOff Crop Zoom VGA SetupH Total H Start H Phase V Start Auto Sync LAMPModeDual Lamp Lamp 1 Lamp 2 Single DU6871/DW6851/DX6831 DLP Projector - User's Manual
27 Main menuSub-menu LAMPPowerNormal Eco Custom Power Level High AltitudeOn Off Lamp 1 Status Lamp 2 Status ALIGNMENTProjection ModeFront Rear Ceiling + Front Ceiling + Rear Up + Front Down + Front Lens ControlZoom Focus Shift V Shift H Lens MemoryLoad MemoryMemory Set 1 to 10 Edit MemoryMemory Set 1 to 10 Center LensExecute Digital AlignmentDigital Zoom Digital Pan Digital Scan Reset H/V AlignmentH Zoom V Zoom H Shift V Shift Reset CONTROLStandby ModeStandard Eco Auto Power OffOn Off Auto Power OnOn Off Projection controlRS232 Network Automatic switch NetworkIP Address Subnet Gateway DHCPOn Off Apply RS232Baud Rate115200/57600/38400/19200/ 14400/9600/4800/2400/1200 DU6871/DW6851/DX6831 DLP Projector - User's Manual
28 Main menuSub-menu CONTROLRS232ChannelLocal HDBaseT Startup LogoOn Off Trigger05:04 04:03 16:10 16:09 1�88 2�35 Letter Box Native Auto SearchOn Off Dynamic BlackOn Off 3D3D FormatOff Auto Side by Side Top/Bottom Frame Sequential DLP LinkOn Off 3D SwapNormal Reverse 3D 24Hz Display96Hz 144Hz LanguageEnglish/Français/Español/ Deutsch/Português/简体中文/ 繁體中文/日本語/한국어 SERVICEModel Serial Number Software Version Active Source Pixel Clock Signal Format H/V Refresh Rate Lamp 1 Time Lamp 2 Time Blue OnlyOn Off Factory ResetOK Cancel DU6871/DW6851/DX6831 DLP Projector - User's Manual
29 OSD Menu - INPUT Input Selection Test Pattern Background Color Space Input Lock Enter Auto Sync Adjust < AUTO > Enter < LOGO > < Always > INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < AUTO > • Input Selection This function is same as the shortcut key on the remote control� You can use the remote control or this function to select the correct input source� • HDMI HDMI input in PC or media equipment� • DVI DVI input in PC� • VGA RGB signal in PC� • Component/BNC Analog/serial digital interface in media equipment� • DisplayPort DisplayPort input in PC or media equipment� • HDBaseT HDBaseT output of PC, media equipment or HDbaseT transmitter� • Test Pattern The built-in image is provided for installation and adjustment� You can select Test Pattern on OSD or the TEST PATTERN button on the remote control to display the test pattern� Press the button again to display the next test pattern or press the Ex\ it button to exit the test pattern� • Color Space This function allows you to change the corresponding color space for the\ input signal� In most cases, the correct color space can be selected automatically by \ Auto mode� If the selection is not correct, you can use a specific color space forcibl\ y by selecting one of the following options: Auto: The projector detects the input signal and switches to the corresponding\ color space automatically� YCbCr: Set the color space to ITU-R BT �601� YCbCr: Set the color space to ITU-R BT�709� RGB-PC: Use the RGB color space and set the black to 0, 0, 0 RGB while set the \ white to 255, 255, 255 RGB (if a 8-bit image is used)� DU6871/DW6851/DX6831 DLP Projector - User's Manual
30 RGB-Video: Use the RGB color space and set the black to 16, 16, 16 RGB while set the white to 235, 235, 235 (if a 8-bit image is used) to correspond to\ the luminance value defined in the digital component standard� • Input Lock You can use this function to lock an input source to the internal sync si\ gnal (Auto, 48Hz, 50Hz or 60 Hz)� The sync signal is locked to the current signal source if it’s set to Auto� • Background You can use this function to specify the image to be displayed on the bla\ nk screen when no signal is input� You can select the Startup logo, Blue, Black, or White� The default is Startup logo� • Auto Sync Adjust You can use this function to set auto synchronization for the input signa\ l� Auto: The projector memorizes 10 sets of signal sources that you have used lat\ ely� When the Auto option is selected, the projector will choose the signal that you u\ se last time� Always: The auto sync function is executed every time� DU6871/DW6851/DX6831 DLP Projector - User's Manual