Vivitek D803w 3d Projector Quickstart Guide

							HOW TO SET UP VIVITEK PC 3D-READY  PROJECTORS
 Make sure the source’s 3D DLP Link compatible media 
player is set-up.
   Check to see “Stereoscopic” function is set for 
   “Quad Buffered Open GL”.
 Play  the desired content via the media player.
 View the 3D content with DLP Link Active Shutter glasses.Note: XPand X102 DLP-Link 3D glasses are recommended
©2011 Vivitek Corporation. All rights reserved.  Vivitek and the Vivitek logo are registered trademarks of Vivitek Corporation.  All other company or product names mentioned herein are trademarks or registered tradema\
rks of their respective companies. 
VIVITEK PROJECTORS THAT ARE 3D-READY VIA DLP LINK  |  FOR PRODUCT INFORMATION, VISIT US AT WWW.VIVITEKCORP.COM
 Check in the projector’s menu to ensure the 3D function is on.
  Under “Installation II”, select “Advanced”                Select “3D”                        Make sure “DLP-Link” is selected for “3D” 
 Select source as “VGA” on 
the projector. 
Note: Menu and source options will vary 
depending on the projector
 Use the projector as the only/solo display for the PC.
 Check the control panel settings on the video source and ensure:
   “Stereo Enable” is ON
   Resolution is set to “1024x768”, “800x600” or “1280x720” @120Hz
 Make sure your PC features an 
NVidia Quadro FX graphics card 
or equivalent. The PC must have 
quad-buffered and Open GL 3D 
capability. Using VGA,  connect the 
PC to the projector.
Note: Location of I/O ports and selection 
will vary depending on the projector
VGA
RS-232
L-AUDIO-R VIDEO AUDIO IN
HDMI
S-VIDEO
D851, 
D853W, 
D855ST, 
D857WT
D859
D837D791ST, 
D795WT
D860, 
D861
D510, D511, 
D512-3D, D513W, 
D530, D535, 
D536-3D, D537W, 
D538W-3D
QUMI Q2D5000