Vivitek D7180hd User Manual

DLP Projector – User’s Manual 
 
 
—  52 — 
Timing Mode Table 
The projector can display several resolutions. The  following table outlines the resolutions that can be 
displayed by the projector. 
SIGNAL RESOLUTION H-SYNC  
(KHZ) 
V-SYNC 
(HZ) 
VGA 
(RGBHV) 
VGA 
(YUV /SOG) 
HDMI 
(DIGITAL)
720 x 400  37.9 85.0  O —  O 
640 x 480  31.5 60.0  O —  O 
640 x 480  37.9 72.8  O —  O 
640 x 480  37.5 75.0  O —  O 
640 x 480  43.3 85.0  O —  O 
800 x 600  35.2 56.3  O —  O 
800 x 600  37.9 60.3  O —  O 
800 x...

DLP Projector – User’s Manual 
 
 
–  53  – 
SIGNAL RESOLUTION H-SYNC  
(KHZ) 
V-SYNC 
(HZ) 
VGA 
(RGBHV) 
VGA 
(YUV /SOG) 
HDMI 
(DIGITAL)
720p 37.5  50.0 — O O 
720p 45.0 
60.0 — O O 
1080i 33.8 
60.0 — O O 
1080i 28.1 
50.0 — O O 
1080p 67.5 
60.0 — O O 
HDTV 
1080p 56.3  50.0 — 
O O 
 
O: Frequency supported 
—: Frequency not supported 
The native resolution of the panel is1920 x 1080 Resolution other than native resolution may display with 
uneven size of text or lines.  

DLP Projector – User’s Manual 
 
 
Projector Dimensions (mm) 
319.00
354.00
411.00
219.00157.00
 
 
—  54 —  

DLP Projector – User’s Manual 
 
 
–  55  – 
REGULATORY COMPLIANCE 
FCC Warning 
This equipment has been tested and found to comply wi th the limits for a Class B digital device pur-
suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection 
against harmful interference when the equipm ent is operated in a commercial environment. 
This equipment generates, uses, and  can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction...

DLP Projector – User’s Manual 
 
 
—  56 — 
APPENDIX I 
RS-232C Protocol 
RS232 Setting 
Baud rate:   9600 
Parity check: None 
Data bit:  8 
Stop bit: 1 
Flow Control  None 
Control Command Structure                         
Header code Command code Data code End code 
HEX   Command Data 0Dh 
ASCII ‘V’  Command Data CR 
Operation Command 
Note: 
XX=00-98, projectors ID, XX=99 is for all projectors 
Return Result P=Pass / F=Fail 
n: 0:Disable/1: Enable/Vaule(0~9999) 
 
Command Group 00 
ASCII HEX...

DLP Projector – User’s Manual 
 
 
–  57  – 
Command Group 01 
ASCII HEX  Function  Description Return Value 
VXXS0103n 56h Xh Xh 53h 30h 31h 30h 33h nh 0Dh Set Color n=0~100 P/F 
VXXG0104 56h Xh Xh 47h 30h 31h 30h 34h 0Dh  Get Tint  n=0~100 Pn/F 
VXXS0104n 56h Xh Xh 53h 30h 31h 30h 34h nh 0Dh Set Tint n=0~100 P/F 
VXXG0105 56h Xh Xh 47h 30h 31h 30h 35h 0Dh  Get Sharpness  0~31 Pn/F 
VXXS0105n 56h Xh Xh 53h 30h 31h 30h 35h nh 0Dh Set Sharpness 0~31  P/F 
VXXG0106 56h Xh Xh 47h 30h 31h 30h 36h 0Dh  Get...

DLP Projector – User’s Manual 
 
 
—  58 — 
Command Group 03 
ASCII HEX  Function Description Return Value
VXXG0301 56h Xh Xh 47h 30h 33h 30h 31h 0Dh  Get Scaling 0: Fill 
1: 4:3 
2: 16:9 
3 :Letter Box 
4 :Native 
5:Auto 
6:16:10 Pn/F 
VXXS0301n 
56h Xh Xh 53h 30h 33h 30h 31h nh 0Dh  Set Scaling 0: Fill 
1: 4:3 
2: 16:9 
3 :Letter Box 
4 :Native 
5:Auto 
6:16:10 P/F 
VXXG0302 
56h Xh Xh 47h 30h 33h 30h 32h 0Dh  Blank   Pn/F 
VXXS0302n  56h Xh Xh 53h 30h 33h 30h 32h nh 0Dh  Blank   P/F 
VXXG0303  56h Xh...

DLP Projector – User’s Manual 
 
 
–  59  – 
Command Group 04 (Remote Control) 
ASCII HEX  Function Description Return Value 
VXXS0401 56h Xh Xh 53h 30h 34h 30h 31h 0Dh   UP arrow    P/F 
VXXS0402  56h Xh Xh 53h 30h 34h 30h 32h 0Dh   DOWN arrow    P/F 
VXXS0403  56h Xh Xh 53h 30h 34h 30h 33h 0Dh   LEFT arrow    P/F 
VXXS0404  56h Xh Xh 53h 30h 34h 30h 34h 0Dh   RIGHT arrow    P/F 
VXXS0405  56h Xh Xh 53h 30h 34h 30h 35h 0Dh   POWER    P/F 
VXXS0406  56h Xh Xh 53h 30h 34h 30h 36h 0Dh   EXIT    P/F...