ViewSonic Pjd7383i Projector User Manual

Operation 37
Creating your own startup screen
In addition to selecting the projector preset startup screen from among ViewSonic logo, 
Black or Blue screen, you can make your own star tup screen that is a picture projected from 
your computer or video source.
To create your own start up screen, project the picture you want to use as  your startup screen 
from either a computer or  video source. The rest of the steps are as follows.
1. Press  MENU/EXIT  on the projector or  Menu on the remote control and...

Operation
38
Setting the presentation timer
Presentation timer can indicate the presentation  time on the screen to help you achieve 
better time management when giving presenta tions. Follow these steps to utilize this 
function:
1. Press  Timer on the remote control to access the  Presentation 
Timer  menu, or go to the  SYSTEM SETUP: Advanced > 
Presentation Timer  menu and press MODE/ENTER  on the 
projector or  ENTER on the remote control to display the 
Presentation Timer  page.
2. Highlight...

Operation 39
Controlling the projector through a LAN 
environment
You can manage and control the projector from one or more remote computers when they 
are properly connected to the same local area network.
Wired LAN connection
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to  the RJ45 LAN input jack of the projector 
and the other end to the RJ45 po rt on your Ethernet or router.
2. Press  MENU/EXIT  on the projector or  Menu on the remote control and then press 
/  until...

Operation
40 4. Press   to select the item you want to modify and press 
MODE/ENTER on the 
projector or  ENTER on the remote control.
5. Press  /  to move the cursor and the press  /  to enter the value.
6. To save the settings, press  MODE/ENTER on the projector or ENTER  on the remote 
control. If you do not want to save the settings, press  MENU/EXIT on the projector 
or  Exit  on the remote control.
7. Press  to highlight  Apply and press  MODE/ENTER  on the projector or  ENTER 
on the remote...

Operation 41
If you need more information about AP and Infrastructure modes, please refer to user 
documentations for Wireless Routers which are usually available on 3C stores.
Resetting the network settings
If you encounter a malfunctiom of network connection and need to reset the network 
settings, you can go into the  SYSTEM SETUP: Basic > LAN Control Settings  > 
Network Reset  menu to return the network settings to default values.
If you want to return the network settings to  default values and...

Operation
42 6. To have access to the Administrator page, you need to enter a password. The default 
password is “0000”.
• System Status: Displays the system information.
• General Setup: Allows you to turn on/off  the projector, switch the input signal 
for the projector, and change the password for the Administrator page.
• Picture Setup/Image Setup: Provides  some OSD menu items for adjusting the 
projected pictures. See  Menu operation on page 59  for details.
• Alert Setup/Mail Setup:  Allows you...

Operation 43
i. These buttons function the same as the ones on the OSD menus or 
remote control. See  2. PICTURE menu on page 64  and Projector on 
page 8  for details.
ii. To switch between input signals, click on your desired signal.
iii. The software is available in multiple languages.
• The Menu button can also be used to go back to previous OSD menus, exit and save menu  settings.
• The source list varies according to th e connectors available on the projector.
• When you use the projector control...

Operation
44 Please pay attention to the limi
tation of input length (including space and other punctuation 
keys) in the list blow:
The info page displays the information and status of this projector.
After pressing the button “Contact IT Help”,  the HELP DESK window will appear in the 
upper right corner of the screen. You will be able to deliver messages to RoomView™ 
software administrators/users who conne ct to the same local area network.
Please only deliver the messages in English letters and...

Operation 45
For more information, visit 
http://www.crestron.com & www.crestron.com/getroomview .
**Crestron RoomView
On the “Edit Room” page, enter the IP Address (or hostname) as shown on the projector’s 
on-screen display (OSD) menu, and “02” fo r IPID, “41794” for the reserved Crestron 
control port.
About Crestron RoomView setting and comma nd method, please access below website to 
get RoomView User Guide and more information:
http://www.crestron.com/feat...

Operation
46
Displaying images through vsPresenter
Downloading and installing vsPresenter
The vsPresenter is an applicat ion running on the host PC. It  helps connect your computer to 
an available network projector  and transfer the desktop conten t to the network projector via 
local network connection.
1. Enter the main page of Network Control. See steps 1-2 on page  41 for details.
2. Download vsPresenter.
3. When the download is complete, install the  software to your computer by clicking the 
exe...