Uniden Bc 248clt Vhf Uhf Scanner Reference Manual
Here you can view all the pages of manual Uniden Bc 248clt Vhf Uhf Scanner Reference Manual. The Uniden manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 31
28 4. Press Eto complete the entry. 5.ALARMindicator and time stop flashing, but remain on. 6. The alarm time remains in the display for five seconds, then returns to current time. Set Alarm to Tone Mode Press ALARMto turn on the alarm function. The ALARMindicator and current alarm time are displayed. When the alarm goes off, it will sound as a series of beeps gradually growing louder. The alarm will continue for approximately 15 minutes, if no action is taken....
Page 32
29 Turn the Alarm Off Press ALARMto deactivate the alarm function. When the alarm is off, the ALARMindicator and current alarm time are no longer displayed. Only the current time displays. If you find the Tone Alarm too loud, select the Radio Mode instead. The volume is adjustable. If you would like to listen to the scanner while waking up, turn the scanner on. The snooze function continues to operate while the scanner is turned on and in any mode. BC248clt.qxd 3/8/00 7:19 PM Page 29
Page 33
30 Set Alarm to Radio Mode Before you set the Radio Alarm, make sure the AM or FM channel is selected and the VOLUME control is set to the desired level. The scanner must be turned off (Clock Mode), to be woken up by the radio alarm. 1. Press OFF. 2. Press and hold ALARMfor more than 2 seconds. When the alarm is on, the ALARMand RADIOicons flash for 5 seconds. 3. The ALARMremains on. When the alarm goes off, it will play the radio station that was previously selected. The alarm will continue for...
Page 34
31 Helpful Hints General UseTurn the scanner off before disconnecting the power.Always write down the programmed frequencies in the event of scanner memory loss. If scanner memory is lost, simply reprogram each channel. The display shows All Loc Out when there has been a memory loss.Always press each keypad button firmly until you hear the entry tone for that key. Location If your scanner receives strong interference or electrical noise, relocate the scanner or its antenna away from the source of...
Page 35
32 ProblemSolution Check the connections at both ends of the AC Adapter. Turn on the wall switch of your room. You could be using an outlet controlled by the wall switch. Move the AC Adapter to another wall outlet. Scanner won’t power up. Poor reception.Check antenna connection. Move the antenna. If the programmed frequency is higher than 406MHz, a shorter antenna length may improve the reception. Relocate the scanner. You may be in a fringe area. This could require an optional multi-band...
Page 36
33 ProblemSolution Scan won’t stop.Adjust squelch to the threshold (Page 9). Check the antenna connection. Check to see if many of the channels are locked out. If so, the scanner has less chance of finding an active channel. Review each channel’s frequency to see if it is correct and no memory has been lost. It is possible that none of the programmed frequencies are active at this time. Weather Scan won’t work.Adjust squelch to the threshold (Page 9). Check the antenna connection. It is...
Page 37
34 Certified in accordance with FCC Rules and Regulations Part 15 Sub-part C as of date of manufacture. Band Coverage:10 bands plus Weather Channel and AM/FM Radio Frequency Coverage: Scanner 29.0-29.7 MHz 10 Meter Amateur Band 29.7-50.0 MHz Low Band 50.0-54.0 MHz 6 Meter Amateur Band 137-144 MHz Military Land Mobile 144-148 MHz 2 Meter Amateur Band 148-174 MHz VHF High Band Above bands in 5 kHz steps 406-420 MHz Federal Government 420-450 MHz 70cm Amateur Band 450-470 MHz UHF Standard Band 470-512 MHz...
Page 39
36 WARRANTOR:UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION:This warranty to the original user shall terminate and be of no further effect one year after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary,...