Tripp Lite 4 Port Kvm Manual

1
Owner’s ManualWarranty 
Registration
Register online today for a chance  
to win a FREE Tripp Lite product!  
www.tripplite.com/warranty
4-Port USB KVM Switch
Model: B006-VU4-R
Safety Information  2
Package Contents 2
System Requirements 2
Product Features 2-3
Specifications  4
Installation 4
Hotkey Operation 5-6
Troubleshooting   7
Warranty & Warranty Registration 7
1111 W. 35th Street, Chicago, IL 60609 USAwww.tripplite.com/support
Note: Follow these instructions to ensure proper operation and...

2
Safety Information
•  To reduce the risk of electric shock, do not expose the product to moisture.
•  Operate this product using only the included external power supply. Use of other power 
supplies could impair performance, damage the product, or cause fire.
•  Use only recommended accessories to avoid fire, shock or other hazards.
•  Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning 
fluids or aerosols, which could enter the unit and cause damage, fire or...

1
23
3
124
3
Front Panel
Product Features (continued)
1 Port Selection Pushbuttons—Press the button of the desired port to switch the focus of 
the KVM switch to another computer.
2 Port Status LEDs—The LED will illuminate a dim or light orange to indicate that a 
computer is connected to the port and is powered-on. The LED will illuminate a bright 
orange to indicate that the corresponding port currently has the KVM switch’s focus.
3 Console Keyboard/Mouse Ports—The console’s USB Keyboard and USB Mouse...

4
Installation
Note: Before you begin, power-off all devices that you will be connecting to the KVM 
switch. You must unplug the power cords of any computers that have the Keyboard Power 
On feature.
1 Connect the console to the console ports on the KVM switch. The USB Keyboard and 
Mouse Console Ports are on the front of the unit. The HD15 Video Console Port is on 
the back of the unit.
2 Connect the USB and HD15 Computer ports on the back of the KVM switch to a 
computer using a P758-Series KVM Cable...

5
Hotkey Operation
The B006-VU4-R allows the KVM switch to be controlled via the keyboard. The table 
below describes the available Hotkeys and their functions. Hotkey commands require that 
the [Shift] key be held down while the remaining hotkeys are pressed. The first two hotkeys 
will always be [Scroll Lock], [Scroll Lock] or [Ctrl], [Ctrl]. [Scroll Lock], [Scroll Lock] 
is the default. It can be changed to [Ctrl], [Ctrl] using the Change Hotkey Mode Activation 
Command in the following table.
Hotkey...

6
Change Hotkey Mode Activation 
CommandInitiate Setting Mode by holding down the [Num Lock] key, pressing and 
releasing the minus [-] key, and releasing the [Num Lock] key. Once initiated, 
press [t] to switch to [Ctrl], [Ctrl]. When set at [Ctrl], [Ctrl], change the Hotkey 
Mode Activation Command back to [Scroll Lock], [Scroll Lock] by holding 
down the [Num Lock] key, pressing and releasing the minus [-] key, and then 
releasing the [Num Lock] key. Once initiated, press [t] to switch to [Scroll...

7
Troubleshooting
ProblemAction
Keyboard
Not Responding • Check all keyboard connections to ensure they are secure.
• Perform the Keyboard/Mouse Reset hotkey command.
• Unplug and replug the keyboard from the KVM keyboard console port.
• Reset the KVM switch:
1) Turn off all connected computers. 2) Disconnect KVM Cable Kits from the 
KVM switch. 3) Wait 5 seconds, then reconnect the KVM Cable Kits to the 
KVM switch. 4) Turn connected computers back on.
Mouse
Not Responding • Check all mouse connections...