Trillium Panther 2064 Technical Service Manual

Feature 
Programming . Technical 
Service 
Manual 
Sets (program code 3YY, preprogrammed for Panther 2064) 
-reflects the type of Set connected to each line. 
Simultaneous/Serial Ringing (program code 009, pre- 
programmed for serial ringing) - determines whether a 
station will hear only one incoming ring (serial) or will hear 
the CO/PBX ringing cadence (simultaneous). 
SMDR Printout (program code 002, preprogrammed for 
outgoing toll calls) - selects the type of call records cap- 
tured by the printer...

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .._ . . ._..... . . . . . . . ....... . . ....

Operating 
Instruktiofis Technical 
Service 
Manual 
Function 
Busy Override (responder is on an out- 
side call) 
Busy override has no effect on a Set 
that has activated Do Not Disturb. 
In any event, responder may ignore 
busy override signals. 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
Callback 
If. the Transfer Ringing Return feature is 
so programmed, a .transfetred call (see 
Transfer Ringing), will return to, the 
%transferring...

Technical 
Service 
Manual 
Function I User Action i 
Set/System Response 
Calling the Attendant : press Intercom. 
This procedure will connect you with j ; Continuous tone is heard, and 
; Intercom indicator WINKS 
slowly. 
the master set (usually station 10, but I DialO. i Repeated long tones are heard. 
programmable by the Master Set j 
Assignment feature to any station). j When attendant answers, lift handset. i You are connected to attendant at ma.+ 
: terset. 
Call Transfer (outside call) - voice j...

Operating 
Instrikti0~s Technical 
Service 
Manual 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................... , 
.......,.......,..............,........................,.....................,.............,....................,......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Technical 
Service 
Manual 
Function User Action I 
Sethvstem Response 
Common speed calls j [Non-ham&free] To retrieve call placed i Line indicator WINKS slowly, and con- 
; on hold, lift handset and press appropri- ; nection is reestablished. 
In handsfree operation, pressing * (as j ate line key. 
first entry in telephone number se- j 
quence) automatically selects last i [Handsfree] To retrieve call placed on i Line indicator WINKS slowly, and con- 
outside line used at station making call. ! hold,...

Operating 
Instrutitiori~ Technical 
Service 
Manual 
Function I User Action j Set&stem Response 
Conferencing (initiator plus 2 outside To return to conference call once both 
parties) parties were placed on hold: 
[continued from previous page] 
l Press line key of either outside 
Party* 
l Press Conference and line key of 
remaining outside party. 
To change to 2-party call once confer- 
ence cali is established, press line key 
of party you wish to keep. 
. . . 
0 Connection with selected outside...

Technical 
Service Operating 
Manual Instructions 
::::::::: ~~ ::::::::::::::::::::::: :;:::::::: y:::::::::: 
~~~~~~~......“......,...............................................................................................................................................................................~...~...,........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Technical 
Service 
Manual 
Function 
Door Calling (to Door Module 1 only) 
Calls 
cannot be placed to Door Module 
2 
ExclusiveCal; Hold (outside call) 
While line is on Exclusive Call Hold at 
your station, the corresponding line in- 
d$ator afother stations is ON st&dily. 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
If so programmed, Hold Recall Time 
feature sounds reminder signal through 
speaker after call has been on hold for...

Technical 
-Service Operating 
. Aanuqi. ._ ‘, . Instructions 
,......_.....................................................,.................................. :..: . . . . . . . . . . . . . . . . . . . . . . 
. . . . . . . . . . . . . . . . . . ,,,.... ..I... . . . . . . . . . . . . . ..*........... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....