Home > Toshiba > Notebook > Toshiba Satellite 1800 Maintenance Manual

Toshiba Satellite 1800 Maintenance Manual

Here you can view all the pages of manual Toshiba Satellite 1800 Maintenance Manual. The Toshiba manuals for Notebook are available online for free. You can easily download all the documents as PDF.

Page 1

Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
GENERAL INFORMATION
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
GENERAL INFORMATION
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
GENERAL INFORMATION
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
GENERAL INFORMATION
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1800...

Page 2

TOSHIBA
Tough Enough for Today’s World         TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. HDD REMOVAL
4. MEMORY MODULE REMOVAL
5. MINI PCI CARD REMOVAL
6. MODEM BOARD REMOVAL
7. KEYBOARD REMOVAL
8. IPS SWITCH REMOVAL
9. COOLING MODULE REMOVAL
10. CPU REMOVAL
11. DVD-ROM/CD-ROM DRIVE REMOVAL
12. TOP COVER REMOVAL
13. HDD/BATTERY BOARD REMOVAL
14. RTC BATTERY REMOVAL
15. VOLUME CONTROL BOARD REMOVAL
16. SPEAKERS REMOVAL
17. FDD REMOVAL
18. LED BOARD REMOVAL
19. SYSTEM BOARD...

Page 3

BATTERY PACK  REMOVALOPTIONAL PC CARD REMOVAL
TOSHIBA
Tough Enough for Today’s World
1.  Turn the computer upside down as shown. 
2.  Slide the battery release lever  in the direction of  the
     arrow.  
3.  Slide the  battery pack  to the right and lift it out.
HDD REMOVAL
3. Remove one M2.5x4 black flat head screw
     securing the HDD assembly.
4  Grasp the  HDD bracket handle  and pull to 
    disconnect the HDD assembly. 
5. Lift the  HDD assembly  out of the HDD bay.
  1. Turn the computer upside...

Page 4

MEMORY MODULE REMOVAL
1. Turn the computer upside down.  
2. Remove two M2.5x4 black flat head screws  and
    remove the  memory cover .
3. Push the  memory clips  outward and pull the  
     memory  module  out  of the connector on a
    30 degree angle.
TOSHIBA
Tough Enough for Today’s World
MINI PCI CARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
1. Turn the computer upside down. 
2. Remove  two M2.5x4 black torx screws  securing the mini
    PCI slot cover.
 
     3. Push the 
mini PCI...

Page 5

MODEM  REMOVAL1. Remove one M2.5x4 black flat head screw securing
    the modem slot cover.2. Insert the case separator into the notched side of the    cover and lift up to release the two latches securing     the left side of the modem slot cover.TOSHIBA
Tough Enough for Today’s World1. Open the display panel.
2. Remove the Keyboard holder at the top of the
    keyboard.3. Remove two M2.5x2.6 black screws securing the
    keyboard.KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION1800 Series3. Remove...

Page 6

4. Lift out the keyboard and set it on the palm rest.
5. Disconnect the keyboard cable from PJ333 on the 
    system board and lift out the keyboard.KEYBOARD REMOVALFIELD REPLACEABLE UNIT DOCUMENTATION1800 Series
TOSHIBA
Tough Enough for Today’s WorldIPS SWITCH REMOVALIPS SWITCH REMOVALCOOLING MODULE REMOVALPJ333Keyboard
cableKeyboard1. Remove one M2.5x4 black flat head screw securing
    the IPS switch cover(touchpad) from the battery     compartment.2. Remove the IPS switch(touchpad) cover from the...

Page 7

FIELD REPLACEABLE UNIT DOCUMENTATION1800 Series
TOSHIBA
Tough Enough for Today’s WorldCOOLING MODULE REMOVAL3. Remove four M2x16 brass screws securing the 
    cooling module.4. Disconnect the fan cable from PJ770 from the
    system board and lift out the Fan module.Fan cablePJ770M2x16 brass screws Cooling
 module5. Slide the CPU lock in the direction of the arrow.
6. Insert a 5mm flat head screwdriver on the top side
    of the CPU socket and push the socket in the    direction of  the arrow and lift...

Page 8

HDD/BATTERY BOARD REMOVAL1. Disconnect the HDD/Battery board cable from PJ4
    on the HDD/Battery board.2. Disconnect the right speaker cable from PJ2 on the
    HDD/Battery board.3. Disconnect the HDD/Battery board from PJ320 on
    the system board.HDD/Battery
board cableHDD/Battery
boardRight speaker cablePJ2PJ4  RTC REMOVAL1. Remove the glass tape securing the RTC battery.
2. Disconnect the RTC battery cable from PJ752 on 
    the system board.3. Lift out the RTC battery.FIELD REPLACEABLE UNIT...

Page 9

TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION1800 Series  FDD REMOVAL1. Disconnect the FDD cable from PJ344 on the 
    system board.2. Remove two M2.5x6 silver screws securing the
    FDD assembly.3. Lift out the FDD assembly.4. Remove three M2.5x3 black screws securing the
    FDD to the FDD case and separate the FDD from 
    the case.5. Disconnect the FDD cable from the FDD.FDD cablePJ344M2x3 silver screwsFDD cableFDD assyVOLUME CONTROL BOARD REMOVAL1. Remove two M2.5x4...

Page 10

TOSHIBA
Tough Enough for Today’s WorldLED BOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION1800 SeriesSYSTEM BOARD REMOVALSYSTEM BOARD REMOVAL3. Disconnect the DC-jack harness from PJ800 on the 
    system board.4. Remove two hex screws and three M2.5x4 black
    flat ehad screws securing the system board. 5. Remove the system board by lifting up from the front
     side as shown above. 6. Disconnect the  flexible cable and battery harness 
     from PJ3 and PJ810 on the system board.1. Lift up the LED...
Start reading Toshiba Satellite 1800 Maintenance Manual

Related Manuals for Toshiba Satellite 1800 Maintenance Manual

All Toshiba manuals