Toshiba D-rw2 Manual

141
Function Setup
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Settings for Progressive Scan Mode
This unit is compatible with the Progressive Scan 
System. The feature provides you with the higher 
defi nition images than the traditional output system 
does. To utilize this feature, you must set Progressive 
Scan mode to “ON” in the Setup menu by following the 
steps below.
1
 Press [SETUP].
2
 Using [K / L], select “Playback”. 
Press [ENTER].
Playback menu...

142
Function Setup
EN
4
 Using [K / L], select “Progressive”. 
Press [ENTER].
5
 Using [K / L], select “ON”. Press [ENTER].
Confirmation window will appear.
6
 Using [{ / B], select “Yes”. Press [ENTER].
Final confirmation window will appear.
• If your TV does not support progressive scan, distorted picture or 
blank screen will appear when “Yes” option is selected. In this 
case, just wait for 15 seconds for auto recovery.
ON Video - Progressive
OFF
Video - Progressive
Activating progressive scan:
Check...

143
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
7
 Using [K / L], select “Yes”. Press [ENTER] 
within 15 seconds.
Your setting will be activated.
8
  Press [SETUP] to exit.
Video - Progressive
Confirm again to use progressive scan.
If Picture is good, Select “Yes”.
No
Ye s
Notes
•  If your TV is compatible with Progressive Scan (525p / 480p), you must use the Component Video cable (commercially 
available) to connect this unit to the TV. (See Method 2 on page...

144
Function Setup
EN
Settings for Still Mode
 Press [STOP C] if you are playing a disc.
Set the type of still image in pausing mode.
1
  Follow steps 1 to 3 on page 141 to display the 
Video setting menu.
2
 Using [K / L], select “Still Mode”. Press 
[ENTER].
3
 Using [K / L], select a setting. Press [ENTER].
Your setting will be activated.
Auto  : Optimun setting is selected.
Field  : Flicker-free images are played back in pause playback mode.
Frame  : Higher- resolution images are played back in pause...

Others
● Troubleshooting
● Language code
● Glossary
● Specifications
0UIFST@6%JOEE


0UIFST@6%JOEE








 

146
Others
EN
Troubleshooting
Before requesting service for this unit, check below for a possible caus\
e of the problem you are experiencing. Some 
simple checks or a minor adjustment on your part may eliminate the probl\
em and restore proper operation.
Power
■ The power does not turn on.
• Check that the AC power cord is connected 
securely.
• (In case of power failure) Check the breaker.
Picture
■  There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are...

147
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Playback
■ The disc does not play.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the 
labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-
ROM) (pages 9-10).
• The region code on the DVD-Video does not match 
the unit (page 10).
• Moisture has condensed inside the unit. Remove the 
disc and leave the...

148
Others
EN
Troubleshooting (cont’d)
Others
Error message
Error message Cause SolutionDisc Error
--- Please eject the disc. ---
Playback feature may not be 
available on this Disc. • Unplayable disc is inserted in the 
unit.
• The disc is upside down. • Insert the standardized disc 
which bear the marks on pages 
9-10.
• Insert the disc with the labeled  side facing up.
Region Error
--- Please eject the disc. ---
Playback is not authorized in your 
region. • Playback is not authorized in the 
region of...

149
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Error message Cause Solution
Recording Error
This program is not recordable in 
Video mode.• You are trying to record the copy-
once program onto the DVD-RW 
disc in Video mode.• Set “Format mode” to “VR mode” 
(pages 52-54).
Recording Error
Cannot record on this disc.• You are trying to record onto the 
disc which is unrecordable, or 
whose status is unable to record.
• The disc is dirty.
• The disc is damaged.•...

150
Others
EN
Troubleshooting (cont’d)
Error message Cause Solution
Recording Error
You cannot record on this disc as 
Power Calibration Area is full.• When recordings are performed 
repeatedly onto an unstable disc, 
this area may come up to be full.
Every time you insert a disc for 
recording, the disc’s working area 
will be taken up.  And if you 
repeat this frequently, it will be 
used up sooner and you may not 
be able to record full 99 titles.• Insert a new disc.
Recording Error
This disc is...