Toshiba D-rw2 Manual

131
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
 Using [K / L], select a desired item. 
Press [ENTER].
Disc Menu Language (Default : English)
Set the language for the Disc Menu.
• Using [K / L], select a setting. Press [ENTER].
  Your setting will be activated.
Audio Language (Default : Original)
Set the Audio language.
• Using [K / L], select a setting. Press [ENTER].
  Your setting will be activated.
• When Original is selected, the audio language will be...

132
Function Setup
EN
Language setting (cont’d)
If “Other” is selected, press 4-digit code using the 
Number buttons. Refer to “Language code” on page 151.
• When you finish entering the code, press [ENTER]. 
5
  Press [SETUP] to exit.
Language - Subtitle
Code Input- ---
Notes
•  Only the languages supported by the disc can be selected.
•  Audio Language setting may not be available on some discs.
•  Some DVD-Video discs allow you to change subtitle selections only via the disc menu. If this is the case,...

133
Function Setup
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Display setting
 Press [STOP C] if you are playing a disc.
1
 Press [SETUP].
2
 Using [K / L], select “Display”. 
Press [ENTER].
Display menu will appear.
3
 Using [K / L], select a desired item. 
Press [ENTER].
OSD Language (Default : English)
Set the language for OSD.
• Using [K / L], select a setting. Press [ENTER].
  Your setting will be activated.
(Continued)
Display
Angle IconON
Screen Saver...

134
Function Setup
EN
Display setting (cont’d)
Angle Icon (Default : ON)
Set to “ON” or “OFF”.
• Using [K / L], select a setting. Press [ENTER].
  Your setting will be activated.
Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on the screen.
• Using [K / L], select a setting. Press [ENTER].
  Your setting will be activated.
FL Dimmer (Default : Bright)
Set the brightness of the front panel display.
You can choose among “Auto”, “Bright” and “Dark”.
• Using [K / L],...

135
Function Setup
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Audio setting
Choose the appropriate Audio settings for your 
equipment.
It will only affect DVD discs during playback.
 Press [STOP C] if you are playing a disc.
1
 Press [SETUP].
2
 Using [K / L], select “Playback”. Press 
[ENTER].
Playback menu will appear.
.
3
 Using [K / L], select “Audio”. Press [ENTER].
Digital Out
Set the digital audio output.
• Using [K / L], select a setting. Press...

136
Function Setup
EN
Audio setting (cont’d)
ASettings for PCM (Default : 48kHz)
• Using [K / L], select a setting. Press [ENTER].
  Your setting will be activated.
48kHz   : If your amplifier/decoder is NOT compatible with 96kHz PCM, 
select“48kHz”. 96kHz sound will be output in 48kHz.
96kHz   : If your amplifier/decoder is compatible with 96kHz PCM, select 
“96kHz”. 96kHz sound will be output.
Note
When playing disc with copyright protection
•  Even if you select “96kHz”, the sound will be down sampled...

137
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
C Settings for DTS (Default : OFF)
• Select a setting using [K / L], then press [ENTER].
  Your setting will be activated.
ON   : Outputs DTS signals.
    When your amplifier/decoder is compatible with DTS, set to 
“ON”.
OFF   : No DTS signal is output.
    When your amplifier/decoder is NOT compatible with DTS, set 
to “OFF”.
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and...

138
Function Setup
EN
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. 
Playback will stop if the ratings exceed the levels you 
set, it will require you to enter a password before the disc 
will playback. This feature prevents your children from 
viewing inappropriate material.
 Press [STOP C] if you are playing a disc.
1
 Press [SETUP].
2
 Using [K / L], select “Playback”. 
Press [ENTER].
Playback menu will appear.
.
3
 Using [K / L], select “Parental Lock”. 
Press...

139
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
 Using [K / L], select the desired level. 
Press [ENTER].
Parental Lock (Default : All)
Set the Parental Lock level.
• Using [K / L], change the parental level. Press [ENTER].
ALL : 
If you select “ALL”, Parental Lock is not active. The disc will play in full.
Ratings 1 to 8 : 
Some discs contain scenes not suitable for children. If you set a rating 
for the DVD, all disc scenes with the same ratings or lower...

140
Function Setup
EN
Settings for Parental lock level (cont’d)
B       A password has already been set.
• Using the Number buttons, enter the current password. 
• Using [K / L], select “Yes”. Using the Number buttons, enter a 
new password. Press [ENTER].
  Your setting will be activated.
• If you select “No”, proceed to step 5.
5
  Press [SETUP] to exit.
• If the rating set is lower than the disc rating, a message will appear. 
Select “Yes” if you want to continue playback and input the password...