Sony Kdl 32v4000 Operating Instructions

31 GB
Using MENU Functions
HDMI Set-upAllows the TV to communicate with the connected “Control for HDMI” 
compatible equipment. Note that communication settings must also be made on the 
connected equipment.
Control for HDMISets whether or not to link the operations of the TV and the 
connected equipment that is compatible with control for 
HDMI. When set to “On”, the following menu items can be 
performed.
If the specific Sony equipment that is compatible with control 
for HDMI is connected, this...

32 GB
Programme SortingChanges the order of analogue channels stored in the TV.
1Press F/f  to select the channel you want to move to a new position, then press 
.
2Press  F/f  to select the new position for the channel, then press  .
Programme Block Blocks an individual channel from being watched.
1Press F/f to select the channel you want to block, then press  .
2Press F/f to select “Block”, then press  .
To watch the channel, select “Allow”.
Intelligent Picture On with Indicator Automatically reduces...

33 GB
Using MENU Functions
Colour SystemSelects the colour system (“Auto”, “PAL”, “SECAM”) 
according to the channel.
Signal Level Displays the signal level for programme currently being 
watched.
Digital Set-up 
Digital Tuning Digital Auto 
TuningTunes in the available digital channels.
You can retune the TV after moving house, or to search for 
newly launched channels.
Programme 
Sorting Allows you to remove or change the order of digital channels 
stored in the TV.
1Press 
F/f  to select the channel...

34 GB
Mixing LevelAdjusts the TV main audio and Audio Description output 
levels.
z
 This option is only available when “Audio Description” is 
set to “On”.
Dynamic Range Compensates for differences in the audio level between
different channels. Note that this function may have no effect 
for some channels.
Optical Out Selects the audio signal that is output from the DIGITAL 
AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set 
to “Auto” when equipment compatible with Dolby Digital is 
connected,...

35 GB
Using MENU Functions
PIN Code To set a PIN for the first time
1Press the number buttons to enter a PIN code.
2Press RETURN .
To change your PIN
1Press the number buttons to enter your PIN code.
2Press the number buttons to enter a new PIN code.
3Press  RETURN .
z
 PIN code 9999 is always accepted.
Technical Set-up Auto Service  UpdateEnables the TV to detect and store new digital services as 
they become available.
System Update Enables the TV to automatically receive free software 
updates...

36 GB
Additional Information
Specifications
Model nameKDL-32V4000KDL-40V4000KDL-46V4000
(New Zealand model only)
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: B/G, I, D/K
Digital: DVB-T
Colour/video systemAnalogue: PAL, PAL60, SECAM, NTSC3.58/4.43 (only video input)
Digital: MPEG-2 MP@ML/HL (Australian model), H.264/MPEG-4 AVC (New Zealand model)
Channel coverageAnalogue:B/G: VHF: E2 to E12 / UHF: E21 to E69 /CATV: S01 to S03, S1 to S41
VHF:  0 to 12, 5A, 9A / UHF: 28 to 69...

37 GB
Additional Information
* Dimensions and mass are approximate values.
Design and specifications are subject to change without notice.
PC input signal reference chart for PC IN   (RGB) jack
~
 This TV’s PC input does not support Sync on Green or Composite Sync.
 This TV’s PC input does not support interlaced signals.
 This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.
PC input signal reference chart for HDMI IN 1, 2, 3 jack
Supplied accessoriesSee “1: Checking...

38 GB
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the  1 (standby) indicator is flashing
The self-diagnosis function is activated. 
1Count how many times the  1 (standby) indicator flashes between each two second break.
For example, the indicator may flash three times, go off for two seconds, then flash again three 
times.
2Press  1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony 
service centre of how the indicator flashes...

39 GB
Additional Information
Sound
The picture is good, but there 
is no sound. Press 
2 +/–  or % (Mute).
 Check if the “Speaker” is set to “TV Speaker” (page 30).
 When using HDMI input with Super Audio CD or DVD-Audio,  DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
Channels
You cannot select your desired 
channel.  Switch between digital and analogue mode, and select the desired 
digital/analogue channel.
Some channels are blank.  The channel is for scrambled/subscription service only....

Printed in Malaysia
3-876-435-14(1)
Customer Support: