Sharp Xg C430x Projector User Manual
Here you can view all the pages of manual Sharp Xg C430x Projector User Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
-39 Basic Operation Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse. If the computer is placed too far away from the projector to be connected via the USB cable, the separately sold remote receiver (AN-MR2) makes it possible to operate the projector with the remote control. For de- tails, see the operation manual of the receiver. Connecting with a USB cable The mouse pointer can...
Page 42
-40 Menu Items The following shows the items that can be set in the projector. Note •“Fine Sync” menu is only displayed when the projector input is COMPUTER/COMPONENT 1, 2 or DVI-D. “Picture” menu “Fine Sync” menu COMPUTER/COMPONENT 1, 2, DVI-D (RGB signal) Picture Picture Mode Contrast Bright Red Blue CLR Temp Reset Signal TypeCOMP.1 Standard 7500K Auto SEL./ADJ. RETURNENTER END0 0 0 0 COMPUTER/COMPONENT 1, 2, DVI-D (Component signal), VIDEO, S-VIDEO Picture Picture Mode Contrast Bright Color Tint...
Page 43
-41 Useful Features “Options1” menu “Language” menu “Options2” menu Options1 Lamp Timer (Life) Resize Image Shift Keystone Auto Keystone OSD Display Background Eco/Quiet Mode Auto Power Off System Sound Menu Position System Lock Direct Power On h ( 100%) VIDEO Normal On On Logo On On On Center Disable Disable SEL./ADJ. RETURNENTER END0 0 0 LanguageCOMP.1 SEL./ADJ. RETURNENTER END English Deutsch Español Nederlands Français Italiano Svenska Português Options2 Password Speaker Audio Out PRJ Mode Fan Mode...
Page 44
-42
Picture
Picture Mode
Contrast
Bright
Red
Blue
CLR Temp
Reset
Signal TypeCOMP.1
Standard
7500K
Auto
SEL./ADJ.
RETURNENTER
END0
0
0
0
Using the Menu Screen
Menu Selections
Example: Adjusting “Bright”
•This operation can also be performed by using the buttons on the projector.
Menu icons
MENU button MOUSE/Adjustment
buttons ('/"/\/|)
RETURN buttonENTER
button
Adjustment
buttons ('/"/\/|)
MENU buttonENTER button
RETURN button
Example: “Picture” screen menu for
COMPUTER/COMPONENT 1
(RGB)...
Page 45
-43 Useful Features Picture Picture Mode Contrast Bright Red Blue CLR Temp Reset Signal TypeCOMP.1 Standard 7500K Auto SEL./ADJ. RETURNENTER END0 0 0 0 3Press ' '' ' ' or " "" " " to select the item you want to adjust. •The selected item is highlighted. To adjust the pro- jected image while viewing it Press ENTER. •The selected single adjustment item (e.g. “Bright”) appears instead of the menu. •When pressing ' '' ' ' or " ""...
Page 46
-44 Picture Picture Mode Contrast Bright Red Blue CLR Temp Reset Signal Type Dynamic Range DVI Standard 7500K D. PC RGB Standard SEL./ADJ . RETURN ENTER END 0 0 0 0 Menu operation Page 42 1 2 3 4 5 1 1 1 1 1Selecting the Picture Mode This function allows you to select the picture mode in accordance with brightness of the room or content of the image to be projected. In all picture modes, items on the “Picture” menu can be adjusted and saved. Picture Adjustment (“Picture” menu) Note • You can also...
Page 47
-45 Useful Features Menu operation Page 42 Note •The Video signal can only be set in VIDEO or S-VIDEO mode. •When “Video System” is set to “Auto”, you may not receive a clear picture due to signal differ- ences. Should this occur, switch to the video system of the source signal. *When reproducing NTSC signals in PAL video equipment. Selectable items Auto PA LSECAM *NTSC4.43 NTSC3.58PAL-M PAL-N PAL -60 7 77 7 7 Setting the Video System The video input system mode is factory preset to “Auto”; however, a...
Page 48
-46 Fine Sync Clock Phase H-Pos V- Po sReset Resolution A uto Sync Signal InfoCOMP.1 640 × 480 On SEL./ADJ. RETURN ENTER END 0 0 0 0 Computer Image Adjustment (“Fine Sync” menu) Menu operation Page 42 1 2 3 1 1 1 1 1Adjusting the Computer Image If the optimum image cannot be obtained with Auto Sync adjustment, use the Fine Sync function. 4 Note • To reset all adjustment items, select “Reset” and press ENTER. Selectable items Clock Phase H-Pos V- Po s Description Adjusts vertical noise. Adjusts...
Page 49
-47 Useful Features Options1 Lamp Timer (Life) Resize Image Shift Keystone A uto Keystone OSD Display Background Eco/Quiet Mode A uto Power Off System Sound Menu Position System Lock Direct Power On h ( 100%) VIDEO Normal On On Logo On On On Center Disable Disable SEL./ADJ. RETURN ENTER END0 0 0 Using the “Options1” Menu Menu operation Page 42 1 2 3 4 5 6 7 8 9 0 q w 1 1 1 1 1 Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Lamp...
Page 50
-48 Using the “Options1” Menu Menu operation Page 42 4 44 4 4 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image be- comes distorted trapezoidally. The function for correct- ing trapezoidal distortion is called Keystone Correction. Auto Keystone Correction Set “Auto Keystone” on the “Options1” screen menu to “On”. Manual Keystone Correction Set “Auto Keystone” on the “Options1” screen menu to “Off”, and select “Keystone”, then...