Sharp SF 2530 User Manual

							49
GENERAL INFORMATION
SUPPLIES
 Types and sizes of copy paper
ORDINARY PAPER
lAutomatic feeding from the paper trays or
manual feed tray (max. 50 sheets)lManual feed tray (single sheet feed)
Size: Size:
Weight: Weight:
l5-1/2 x 8-1/2 size paper can only be set in the lower
paper tray with an optional inner cassette and in the
manual feed tray.l8-1/2 x 11 is the maximum size that can be
manually fed for paper weighing from 28 to 34 lbs.
SPECIAL PAPERS
Special papers must be fed one sheet at a time
through the manual feed tray. See page 12.
Labels Tracing paper Transparency
film
ss
ss
5-1/2 x 8-1/211 x 17
15 lbs. 20 lbs.
ssss
ss
5-1/2 x 8-1/211 x 17
14 lbs.28 lbs.
34 lbs.
Supplies
Downloaded From ManualsPrinter.com Manuals 
						

							50
GENERAL INFORMATION
Supplies
SUPPLIES
Genuine supplies statement
Standard SF-2530 supplies replaced by the user include copy
paper, toner, toner collecting container, and staple cartridges
for an optional staple sorter.For best copying results, be sure to use only
Sharp products.
The package of Sharp toner has the Gunuine
Supplies label.
GENUINE SUPPLIES
Proper storage
1
Store the supplies in a location that is:
lclean and dry,
lat a stable temperature,
lnot exposed to direct sunlight.
2
Store copy paper in the wrapper and lying flat.
lPaper stored in packages standing up or out of the wrapper
may curl or become damp, resulting in paper misfeeds.
Photoconductive drum
The SF-2530 Copier has advanced process control technology
which improves copy quality uniformity. This feature stabilizes
copy quality throughout the life of the photoconductive drum by
automatically compensating for changes in drum characteristics
due to wear, operator use patterns, and environmental
conditions. The automatic adjustments are made in response to
a sensor that detects the reflectance characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance
area (recommended SHARP genuine photoconductive drum), to
prevent low image density copies from poor process control and
possible damage to the machine. If you use other drums, the
process control system cannot run properly.
Downloaded From ManualsPrinter.com Manuals 
						

							51
GENERAL INFORMATION
SPECIFICATIONS
Specifications
COPIER
Type Desktop
Copy system Dry, electrostatic transfer system
Originals Sheets, bound documents
Original sizes Max. 11 x 17
Copy sizes Max. 11 x 17, min. 5-1/2 x 8-1/2
Image loss: Max. 5/32 (4 mm) (leading and trailing edges)
Copying speed 30 copies/min. (8-1/2 x 11)
(at 100% copy ratio) 23 copies/min. (8-1/2 x 11R)
18 copies/min. (8-1/2 x 14)
16 copies/min. (11 x 17)
Continuous copy Max. 99 copies; subtractive counter
First-copy time Approx. 4.1 sec.
Warm-up time Approx. 60 sec.
Copy ratio Variable: 50 to 200% in 1% increments, total 151 steps
Fixed presets: 50%, 64%, 77%, 95%, 100%, 121%,
129%, 141%, 200%
Exposure system Moving optical source, slit exposure
(stationary platen) with automatic exposure function
Copy paper feed Choice of one or two 500-sheet automatic feed paper
trays; one manual feed tray with 50-sheet automatic
feed capability
Fusing system Heat rollers
Developer system Magnetic brush development
Light source Halogen lamp
Required power supply AC 120V, 60 Hz, 12 amperes
Power consumption Max. 1.45 kW
Downloaded From ManualsPrinter.com Manuals 
						

							52
GENERAL INFORMATION
SPECIFICATIONS
Overall dimensions 47-29/64 (W) x 25-19/32 (D)
(1205 mm (W) x 650 mm (D))
Weight (with Approx. 142.0 lbs. (64.4 kg)
optional document Approx. 152.1 lbs. (69.0 kg) (with 500-sheet paper drawer)
 cover SF-CV13) Approx. 157.2 lbs. (71.3 kg) (with duplex module)
Copier dimensions 24-59/64 (W) x 25-19/32 (D) x 23-29/32 (H)
(with optional document (633 mm (W) x 650 mm (D) x 607 mm (H))
 cover SF-CV13)
Operating conditions Temperature: 59°F to 86°F (15°C to 30°C)
Humidity: 20% to 85%
Optional equipment Document cover (SF-CV13)
Automatic document feeder (SF-A17)
Reversing automatic document feeder (SF-A56)
10-bin sorter (SF-S18)
20-bin sorter (SF-S15)
10-bin staple sorter (SF-S54N)
20-bin staple sorter (SF-S56)
Stand/500-sheet paper drawer (SF-D20)
Stand/1000-sheet paper drawer (SF-D21)
Duplex module (SF-DM11)
500-sheet paper drawer (SF-CM11)
Cassette (SF-IC11)
Auditor (SF-EA12)
Counter commander (SF-EA13)
Personal counter (SF-71A/71B)
DUPLEX MODULE (when installed)
Paper type Ordinary paper only
Number of copies 50 (8-1/2 x 11, 8-1/2 x 11R)
30 (8-1/2 x 14, 11 x 17)
Copy paper size 8-1/2 x 11, 8-1/2 x 11R, 8-1/2 x 14, 11 x 17
Copy paper weight 15 lbs. to 20 lbs.
Specifications are subject to change for improvement without notice.
Specifications
Downloaded From ManualsPrinter.com Manuals 
						

							53
ADF (SF-A17)/RADF (SF-A56)
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
CONTENTSPage
lSYSTEM CONFIGURATION................................54lAUTOMATIC DOCUMENT FEEDER (SF-A17)
/ // /
/
REVERSING AUTOMATIC DOCUMENT FEEDER (SF-A56).........55lPart names...........................................55lSpecifications.........................................55lUsing the ADF or RADF..................................56lMisfeed removal.......................................60l10-BIN SORTER (SF-S18)/ // /
/
20-BIN SORTER (SF-S15)..................................61lPart names...........................................61lUsing a sorter.........................................62lSorter capacities.......................................63lMisfeed removal.......................................64lSpecifications.........................................66l10-BIN STAPLE SORTER (SF-S54N)
/ // /
/
20-BIN STAPLE SORTER (SF-S56)...........................67
lPart names...........................................67lUsing a sorter.........................................68lSorter capacities.......................................69lStaple sort............................................70lManual stapling (SF-S56 only).............................72lStaple cartridge replacement..............................73lStaple jam removal.....................................76lMisfeed removal.......................................79lSpecifications.........................................81lSTAND/500-SHEET PAPER DRAWER (SF-D20)
/ // /
/
STAND/1000-SHEET PAPER DRAWER (SF-D21)................82
lPart names...........................................82lLoading copy paper.....................................83lMisfeed removal.......................................84lSpecifications.........................................85
OPTIONAL
EQUIPMENT
Downloaded From ManualsPrinter.com Manuals 
						

							54
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
ADF (SF-A17)/RADF (SF-A56)
SYSTEM CONFIGURATION
The options which are available for the SF-2530 are shown below.
System configuration
lAuditor (SF-EA12)
lCounter commander (SF-EA13)
lPersonal counter (SF-71A/71B)
NOTE:
Operating instructions follow for the Document Feeders (SF-A17
and SF-A56), Sorters (SF-S18, SF-S15, SF-S54N, and SF-S56),
Stand/500-Sheet Paper Drawer (SF-D20), and Stand/1000-
Sheet Paper Drawer (SF-D21). For the Auditor (SF-EA12) and
the Counter Commander (SF-EA13), see their manual.
Reversing automatic document feeder
(SF-A56) Automatic document feeder (SF-A17)
Cassette (SF-IC11)
500-sheet paper drawer
(SF-CM11) Document cover (SF-CV13)
Stand/1000-sheet paper drawer 
(SF-D21) 20-bin sorter (SF-S15)
20-bin staple sorter (SF-S56)Stand/500-sheet paper drawer (SF-D20) 10-bin sorter (SF-S18)
10-bin staple sorter (SF-S54N)
Downloaded From ManualsPrinter.com Manuals 
						

							55
ADF (SF-A17)/RADF (SF-A56)
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
AUTOMATIC DOCUMENT FEEDER (
SF-A17)
REVERSING AUTOMATIC DOCUMENT FEEDER (
SF-A56)
An automatic document feeder (ADF) and reversing automatic
document feeder (RADF) will handle 5-1/2 x 8-1/2 to 11 x 17
originals. If an RADF is installed, two-sided originals can be copied
automatically without having to manually turn them over.
PART NAMES
SF-A17 SF-A56
Document feeder indicators
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Indicates an original is still on the document glass.
Specifications
Acceptable Weight: Single-sided originals: 14 to 34 lbs.
originals Two-sided originals (SF-A56 only): 14 to 34
lbs. for 5-1/2 x 8-1/2 and 8-1/2 x 11
originals.
14 to 29 lbs. for 8-1/2 x 14 and 11 x 17
originals.
Size: 5-1/2 x 8-1/2 to 11 x 17
Capacity: Up to 50 sheets for 5-1/2 x 8-1/2 , 8-1/2 x
11, and 8-1/2 x 14 originals provided the
total aggregate thickness does not exceed
1/4 or 6.5 mm  (14 to 20 lbs.) or 3/16 or
5 mm (21 to 34 lbs.)
Up to 30 sheets for 11 x 17 originals
Power supply Drawn from the copier
Weight SF-A17: Approx. 22.1 lbs. (10 kg)
SF-A56: Approx. 24.3 lbs. (11 kg)
Dimensions SF-A17: 22-31/64 (W) x 20-33/64 (D) x 4-11/32 (H)
(571 mm (W) x 521 mm (D) x 110 mm (H))
SF-A56: 23-5/16 (W) x 20-33/64 (D) x 4-11/32 (H)
(592 mm (W) x 521mm (D) x 110 mm (H))
Specifications are subject to change for improvement without notice.
Feeding roller cover Feeding roller cover
Original guides Original guides
Document feeder tray Document feeder tray
Document feeder cover
Document feeder cover
Exit roller cover
Document feeder indicatorsDocument feeder indicators
Downloaded From ManualsPrinter.com Manuals 
						

							56
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
ADF (SF-A17)/RADF (SF-A56)
Stream feeding mode
The stream feeding mode allows easy operation of continuous
copying from the ADF or RADF. If the stream feeding mode has
been enabled using user program No. 5, the original feed
indicator will continue to blink for approximately 5 seconds after
feeding of all originals is completed. While this indicator is
blinking, any new originals placed in the document feeder tray
will be fed and copied automatically. If the stream feeding mode
has been disabled, the START key must be pressed each time
the originals are set even immediately after completion of a
copy run from the ADF or RADF. The default setting of the
stream feeding mode is ÒOFFÓ. See page 34, USER
PROGRAMS.
1-sided copies of 1-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
lThe ORIGINAL SIZE indicator for the detected original size will
light up, and the paper tray with the corresponding paper size
will be automatically selected.
lThe auto paper select function can be disabled using user
program No. 8. If this function has been disabled, use the TRAY
SELECT key to select the desired paper tray. See page 34,
USER PROGRAMS.
lTo copy onto a different size paper, use the TRAY SELECT key
to make the selection.
lIf an original is left on the document glass, the original reminder
indicator will blink. Remove the original from the document glass
in this case.
 Using the ADF or RADF
lSpecial originals such as transparency film and
tracing paper should not be fed from the ADF and
RADF, but should be placed on the document glass.
lDuplex copying will not work when a non-standard
sized paper is used. (Duplex copying can be per-
formed only when an optional duplex module is
installed.)
lDifferent size originals with the same width can be
placed in the document feeder tray and automati-
cally copied onto copy paper of their respective
sizes.
The automatic copy ratio selection will not function
in this case.
lImage loss (max. 5/32 (4 mm)) can occur at the
leading and trailing edges of the copies.
lBefore loading originals into the document feeder
tray, be sure to remove any staples or paper clips
from them. The ADF or RADF can handle a maxi-
mum of 50 originals.
lDamaged or crumpled originals may misfeed in the
ADF and RADF. It is recommended that these be
copied from the document glass and the copies be
used as original documents.
lWhen feeding originals which have closely spaced
binding holes punched along an edge, place the
originals so that the punched edge is positioned to
the right or along the side guides.
Downloaded From ManualsPrinter.com Manuals 
						

							57
ADF (SF-A17)/RADF (SF-A56)
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
2
Ensure that the 1-sided to 1-sided copying mode is
selected in the ORIGINAL TO COPY section of the
operation panel.
lWhen no indicator in the ORIGINAL TO COPY section is lit, the
1-sided to 1-sided copying mode is selected.
3
Use the 10-key pad to enter the desired number of
copies.
lThe number will be shown in the copy quantity display.
lUse the clear (C) key to cancel an entry if a mistake has
been made.
4
Press the START key.
lTo cancel a copy run, press the CLEAR ALL () key. Copying
will stop and the ADF or RADF will output any originals which
have been fed. Also, the number in the copy quantity display will
be reset to 0.
2-sided copies from 1-sided originals
An optional duplex module must be installed for 2-sided copying.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
If the number of originals is known, use the ORIGINAL
TO COPY key to select EVEN NUMBER or ODD NUMBER
in the ORIGINAL TO COPY section of the operation
panel, then proceed to step 3. If the number of originals
is not known, select PRE-COUNT ORIGINALS for an
automatic count by the ADF or RADF and press the
START key.
lThe number of originals will be displayed in the copy quantity
display.
lWhen the count is complete and the number is known, replace
the originals in the document feeder tray and select EVEN
NUMBER or ODD NUMBER as above.
SORTERORIGINAL TO COPY
(ORIGINALS)EVEN NUMBER
ODD NUMBER
PRE-COUNT
ORIGINALS SORT
STAPLE
SORT
GROUP
EXPOSURE
AUTO
MANUAL
PHOTO
LIGHTDARK
12345
POWER SAVE
START
1
23
456
7
0
C 8
9
ODD NUMBER
PRE-COUNT
ORIGINALS
ORIGINAL TO COPY
(ORIGINALS)EVEN NUMBER
ODD NUMBER
Downloaded From ManualsPrinter.com Manuals 
						

							58
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
ADF (SF-A17)/RADF (SF-A56)
3
Enter the desired number of copies.
lThe maximum number of copies in the two-sided copy mode is
50 for 8-1/2 x 11 and 8-1/2 x 11R and 30 for 8-1/2 x 14 and
11 x 17 paper. If the specified number of copies exceeds the
above number, the copy quantity display will display the maximum
allowable number after copying starts. If an optional sorter is
installed, the display will change to 10 (SF-S18 and SF-S54N)
or 20 (SF-S15 and SF-S56) after copying starts (in sort mode).
4
Press the START key.
lTo cancel a copy run during duplex copying, press the CLEAR
ALL (
) key. Manually remove any copies remaining in the
duplex module following the procedure for removing misfed
paper from the duplex module. (See page 26.)
2-sided copies from 2-sided originals (SF-A56 only)
An optional duplex module must be installed for 2-sided copying.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
Use the ORIGINAL TO COPY key to select .
1
23
456
7
0
C 8
9
TRAY SELECTINTERRUPT
CLEAR ALL
POWER SAVE
START
9
START
PRE-COUNT
ORIGINALS APLE
RT
OUP
LIG
12
Downloaded From ManualsPrinter.com Manuals